AGM CS-A03 Rechargeable Work Light User Manual
- June 14, 2024
- AGM
Table of Contents
AGM CS-A03 Rechargeable Work Light User Manual
Structure
Dimensions
Instruction
- Please fully charge the light before use. You can use mobile phone charges, power banks or car charges to charge it. When the indicator lights are all on, it means the light is fully charged.
- Light Modes: Press the SWITCH button to set the work light to spotlight, high light, low light or turn off.
- Flashing Modes: Press the FLASH button once for red light blinking, press twice for white and red light flashing, press three times for white light flashing.
- How to Charge the Light: Use the type-c cable to connect to a USB wall adapter or use the USB type-c adapter connecting to a USB-C cable.
Using The Stand
- Attach to steel surface
Magnet
- Hanging hole
Hanging
-
Holding it by the hand
Floor stand -
Stationary
Floor stand
Trouble Shooting
| Symptom | Cause and Remedy |
|---|---|
| No brightness | Check the on/off status of the switch. |
- Turn the switch on.
In case of low battery power
- Charge the battery sufficiently.
Cannot charge the battery. (The display light on the main unit does not light
up when charging).| Check if there is a safe connection between the lamp,
charging cable, AC adapter and power outlet, or try a different outlet.
The power is turned off.
- Please turn on the power supply.
The AC adapter or USB-C charging cable is defective.
- Check with a new adapter or cable.
Caution
- Please read the instruction carefully before use and fully charge the product.
- Do not look directly into the light of the LED lamp, as this may cause damage to your eyes or irritation to your cheeks.
- If the light sits unused for a long time, it can affect the battery life, please charge it once every 3 months and the chargingtime is not less than 4 hours.
- If the product is dropped or subjected to a strong shock, be sure to check each part for abnormalities.
- Do not cover the product with a cloth or cover during use, as this may lead to overheating, fire or explosion.
- Non-professionals should not disassemble and replace any components of this light by themselves.
- If the main unit is abnormally hot, makes a strange noise or smells, or feels any other abnormality, immediately stop using it.
- Wipe off dirt with a cloth dampened with water or an appropriate amount of diluted kitchen detergent (neutral).
- The product is not completely waterproof. Do not use in water or heavy rain.
- Be sure to turn off the light after use.
- This product is not a toy, please place them out the reach of the children.
Technical Specifications
PORTABLE MULTI-FUNCTION EMERGENCY LIGHT
Model| CS-A03
Colour| Yellow/Blue
Rated power| 10 W
Maximum brightness| ≥800LM
Lighting modes| spotlight, high light, low light
Flashing modes| red light blinking; white and red lightflashing; white light
flashing
Use time| Spotlight ≥5 hours
Highlight ≥2.5 hours
Low light ≥8 hours
Flashing/burst flashing ≥6 hours
Charging time| 4~5 hours
Battery specification| 3.7 V/5200 mAH
Charging cable| USB-C Cable
input/output| DC 5 V/2 A MAX
Waterproof rating| IP 55
Working environment temperature| -10℃~60℃
Charging environment temperature| 0～45℃
Dimensions| 122.5 mm116 mm47 mm
Material| ABS+PC+TPE
Weight| 0.32 KG
Package List| Emergency Light × 1
USB C to type C Cable × 1
USB C to Type-C Adapter × 1
Manual ×1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>