SHEIN HT15 Smart Watch User Guide

SHEIN HT15 Smart Watch

Product Information

• Device Type: Smart Watch

• Battery Type: Lithium Polymer

• Display Size: 1.85 inches

• Device Weight: 41g

• Watch Dimensions: 45.738.711mm

• Waterproof Level: IP67

• Watchband Material: Silicone

• Battery Model: 562125

• Battery Capacity: 260mAh

• Charging Voltage: DC SV

• Battery Power: 0.962Wh

• Included Components: Mr.Gorba HT15 Smartwatch, User Guide,
  Charging Cable

• Phone System App Compatibility: Android 5.1+ / iOS 8.2+

• Compatibility Note: Some App functions (message push/call ID
  display, etc.) may not be compatible with some phones.

Product Usage Instructions

1. Power On / Off: Long press the home screen to power on or power off the watch.
2. Switch Dial: Swipe left and right on the home screen to switch the dial.
3. Scroll Encoder: Scroll the encoder to switch interfaces and functions.
4. Swipe Down: Swipe down on the home screen to view the shortcut menu.
5. Swipe Up: Swipe up on the home screen to view messages.
6. Browse Function Interface: Swipe right or left on the home screen to browse the function interface.
7. Charging the Watch: Use the magnetic charging cable to connect to the contact point on the back of the watch and connect the other end to a power source. Charge the watch for 2 hours before first use.
8. Connecting the Watch to Mobile Phone: Enable Bluetooth on your mobile phone and open the FitCloudPro app. Follow the steps to add and connect the device model HT15. Make sure to enter correct personal information in the app.
9. App Download: Scan the QR code or search for “FitCloudPro” in your app store to download and install the app.
10. Disclaimer & Warning: Refer to the user manual for detailed information regarding protection grade, maintenance, and any additional warnings or disclaimers.

INTRODUCTION

Please enter the APP for detailed product functions

Basic Parameters

POWER ON/OFF

Power On

• Long press the power button to turn on the watch.
• When the watch is powered off, the watch will automatically turn on when it is connected to a charger for charging.
• When starting with ultra-low power, please connect the charger to charge the watch for 30 seconds before starting.

Power Off

• In the power-on state, long press the power button to turn off.
• The watch will turn off after the ultra-low battery vibration reminder.

Reset

• In the power-on state, swipe down the home screen, enter the function menu, and select Settings> System> Reset.
• After restoring the factory settings, the watch will automatically restart.
  After restarting, the watch will be unbound from the phone, and all user data will be cleared.

Quick Instructions for Usage

How to Charge the Watch
You need to charge and activate the watch before using it for the first time.
Use the magnetic charging cable in the box to adsorb to the contact point on the back of the watch, and connect the other end of the charging cable to the power port with USB. If the device is not used for a long time, please make sure to recharge it every three months.

Please ensure to charge 100% before the first use, the charging time is 2 hours.
After the product is fully charged, please disconnect the charging cable from the power source to prevent a short circuit when it comes into contact with a conductive object.

PHONE SYSTEM APP

Some APP functions(message push/caller ID display, etc) may not compatible with some phones.

[APP DOWNLOAD]
Use the mobile phone to scan the QR code below, download and install the APP, or directly to the APP store, and search “FitCloud Pro” to download and install.

Connect APP

Mobile Phone Connection Steps
Enable the Bluetooth function of the mobile phone, enter the “FitCloudPro” APP, click “Add Peripheral Now”, click “Search Now”, select the device model “HT15”, connect and pair (or click “Add Peripheral Now”, click the scan code in the upper right corner, and scan the QR code in the watch). After the watch is connected to the APP, you need to enter the correct personal information in the APP.

Note: Please allow the APP to run in the background in the phone settings and enable the APP notiPcation.
The time will be inaccurate if the watch is disconnected from the APP for a long time or the battery is exhausted. You need to connect the APP to SYNC the time.

Disclaimer

• The contents of this manual are provided “as is” and unless required by applicable law, all contents of this Manual are provided without warranty of any kind, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose.
• To the extent permitted by applicable law, under no circumstances will the damages arising rom the contential is manual and ee products described in this manual, nor will it compensate for any loss of profits, data, good will or expected savings.
  To the extent permitted by applicable law, the Company’s maximum liability to you in any case for loss or loss resulting from the use of the Products described in this Manual (other than damages under the law of use in cases involving personal injury) is capped at the price you paid for the Products.
  This pract care lore perence, by. dras a medid hagnosith ins related to this product are for reference only, not as a medical diagnosis basis.

Warning
Protection Grade

• The watch meets IP67 protection level requirements and is suitable for washing hands, being exposed to rain, and other daily waterproof situations.
• Not suitable for water activities such as diving, long swimming, or coastal swimming.
• Not suitable for a hot shower, hot springs, sauna (steam room), diving, and deep water activities.

Maintenance

• Please keep the equipment and accessories dry. Do not use external heating equipment such as a microwave oven or hair dryer for drying.
• Please clean the equipment regularly with hot water at room temperature to avoid fouling and bacteria.
• Do not place the device and its accessories in an area where the temperature is too high or too low. Otherwise, the device may catch Pre or explode.
• Do not cause strong shock or vibration to the device and its accessories. Otherwise, the device and its accessories may be damaged, which may lead to device failure.
• Please avoid using the equipment in an environment of sun exposure, high temperature, humidity, and open Bame accessories.
• Do not use strong chemicals, cleaners, or strong washing to clean the equipment or its accessories.
• Do not allow children or animals to chew or swallow the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>