ANKER A2348 20W PD 2 Port Wall Charger User Manual
- June 14, 2024
- Anker
Table of Contents
Live Charged.
Anker 20W Wall Charger
(2 Ports)
USER MANUAL
A2348 20W PD 2 Port Wall Charger
Attention
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Specifications
| Input | 100-240V~ 1A 50-60Hz |
|---|---|
| Output | Use 1 Port, Output: USB-C: 5.0V 3.0A, 15.0W / 9.0V 2.22A, |
20.0W / 12.0V 1.67A
(20.0W Max)
USB-A: 5.0V 3.0A, 15.0W / 9.0V 2.0A, 18.0W / 12.0V 1.5A (18.0W
Max)
Use 2 Ports, Output: USB-C+USB-A: 5.0V 1.5A, 7.5W+5.0V 1.5A, 7.5W
(15.0W Max) Total Output: 20.0W Max
For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com
Or scan the QR code below:
https://rainbowbridge.anker.com/qrscan?key=anker-221202
@anker_official
@anker_jp| @Anker Deutschland
@AnkerJapan
@Anker| @AnkerOfficial
@Anker_JP
---|---|---
PAP 22
Raccolta Carta
Product Number: A2348
51005003998 V01
| Average Active Efficiency | 82.66% |
|---|---|
| Efficiency at Low Load (10%) | 73.53% |
| No-Load Power Consumption | 0.08W |
| Operating Temperature | 0 ～ 25 ℃ / 32-77 ℉ |
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2348 is
in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/ EU &
2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity
is available at the following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the product type A2348 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy- Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.
Indoor use only
**** This symbol indicates that this product shall not be treated as
household waste.
Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment.
Anker Innovations Limited | Room 1318- 19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters) Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807
Munich, Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Customer Service
*24-month limited warranty
Lifetime technical support**
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>