BRAUN BC03B Classic Analogue Alarm Clock User Guide
- June 14, 2024
- Braun
Table of Contents
BRAUN BC03B Classic Analogue Alarm Clock
Product Information
The BC03 Alarm clock is a reliable and efficient timekeeping device manufactured by Braun. It is equipped with various features such as alarm function, snooze function, and light function. The clock operates on a single AA (1.5V) battery, and it is important to use new alkaline batteries from a reputable brand for optimal performance.
Product Usage Instructions
Battery Installation
- Open the battery cover.
- Insert 1xAA (1.5V) battery into the battery compartment, ensuring correct polarity as shown in the diagram.
- Replace the battery cover.
Note: Only use new alkaline batteries from a reputable brand.
Time Setting
- Locate the time set knob ( ) on the back of the clock.
- Turn the time set knob in the direction of the arrow until the correct time is displayed.
Alarm Setting
- Locate the alarm set knob ( ) on the back of the clock.
- Turn the alarm set knob in the direction of the arrow until the desired alarm time is displayed.
Alarm Function
To set the alarm:
- Pull the button up via the back of the clock to reveal the green alarm bar.
To unset the alarm:
- Push the button at the top of the clock so that the green alarm bar is not showing.
Snooze Function
When the alarm is sounding:
- Press down on the main body of the clock.
- The SNOOZE/LIGHT button at the base will be activated.
- The alarm will be stopped, and it will sound again in approximately 4 minutes.
Light Function
At any time:
- Press down on the main body of the clock.
- The integrated foot SNOOZE/LIGHT button at the base will be activated.
- The dial will be illuminated for approximately 5 seconds.
Battery Installation
- Insert 1xAA (1.5V) battery observing the correct polarity, as shown on the diagram.
- Replace battery cover.
Only use new alkaline batteries from a reputable brand.
Settings And Functions
Time setting
- Turn the time set knob ( )on the back of the clock in the direction of the arrow until the correct time is shown.
Alarm setting
- Turn the alarm set knob ( )on the back of the clock in the direction of the arrow until the desired alarm time is shown.
Alarm function
- To set the alarm, pull the button up via the back of the clock so that the green alarm bar is showing.
- To unset the alarm, push the button at the top of the clock so that the green alarm bar is not showing.
Snooze function
- When the alarm is sounding, press down on the main body of the clock and the SNOOZE/LIGHT button at the base will be activated.
- The alarm will be stopped and will sound again in ~4 minutes.
Light function
- Anytime, press down on the main body of the clock and the integrated foot SNOOZE/LIGHT button at the base will be activated.
- The dial will be illuminated for ~5 seconds.
More Information
For detailed information refer to the full user manual available atwww .braun-clocks.com/pages/warranty or scan this code:
Braun helpline
Should you have a problem with your product, please check your local service centre at:
Certain trademarks used under license from the Procter & Gamble Company or its affiliates.