blinds2go PerfectFIT DuoShade Beige Thermal Blind Instruction Manual
- June 4, 2024
- blinds2go
Table of Contents
PerfectFIT DuoShade Beige Thermal Blind
Instruction Manual
We’ve made a handy video version of this fitting guide, just click the play
button to view it.
If you prefer to print the instructions or simply follow them step-by-step,
just keep reading.
Assembling the frame
Unpack the blind and frame (the side frames are packed separately in the same box), then lay out all the parts to ensure no cords are tangled.
Before you slot the frames together, clip the corner cover pieces onto the corner joints so that they’re firmly attached.
When you first unpack the blind, the cords will be tied to keep them together. Untie the knot to release the cords, so that you can spread out the blind ready for assembly.
Attach the side frames to the top and bottom by inserting the pegs on each corner section into their corresponding channels in the frames. Press the pegs firmly into place, the tension in the blind’s cords will hold the frame together once fully assembled.
Testing the tension
Stand the assembled frame upright and raise it fully to the top. If the blind
starts to lower slightly of its own accord, the tension will need a small
adjustment.
On the top of the frame the two guide cords are tied off with a knot – pull
the cord through by 5mm and tie another knot to hold it in place. Do this on
both of the guide cords at the top of the blind to increase the tension.
Stand the blind back up and retest, making further small adjustments to the
tension if necessary.
Installing the brackets
Locate the correct position for the brackets by holding a credit card or store card vertically in the corner of the glass – the bracket will sit in line with the edge of the card.
Installing the blind
Line the assembled blind up with the brackets so that the center prong of the
bracket is aligned with the oval slot on the frame.
Ensure that the frame is sitting on the inside edge of each of the brackets
(between the bracket and the glass).
Push the frame towards the window until the oval slots lock onto the prongs of each of the brackets. The installation of the blind is now complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>