ezcoo EZ-SP12H21 1×2 HDMI 2.1 Splitter Scaler User Manual
- June 14, 2024
- ezcoo
Table of Contents
ezcoo EZ-SP12H21 1×2 HDMI 2.1 Splitter Scaler
OVERVIEW
EZ-SP12H21 is a 1×2 splitter for HDMI with Ultra HD 8K@60Hz, 4K@120Hz support. This splitter reliably distributes one HDMI source signal to two HDMI outputs. Especially when you have one 4K TV and one 1080P TV, It supports 4K and 1080P output simultaneously. It supports HDMI 2.1 specification features including data rates up to 8K@60Hz,4K@120Hz, Dolby Vision, HDR and HDCP2.3, Deep Color, 3D, Lip Sync, and HD lossless Audio/Video formats. It is an ideal choice for applications that require the distribution of an HDMI source signal to multiple outputs.
FEATURES
- Distributes one HDMI source signal to two HDMI displays.
- It supports 4K and 1080P output simultaneously
- Support HDMI 2.1 8K@60Hz, 4K@120Hz,Dolby Vision and HDCP 2.3
- Support VRR, ALLM
- Support EDID manager
- Support 3D, Support deep color 30bit, 36bit.
- Support Blue-Ray 24/50/60fs/HD-DVDIxvYCC.
- Support Dolby Atmos Audio
- Support HDMI signal re-timing, never lose quality
- Plug and Play; No driver required; Installs in minutes
PRODUCT DIAGRAM
package Accessories
- HDMI Splitter ×1
- Type-C cable x1
- Reusable Cable Tie x2
- User Manual x1
INSTALLATION
- Connect one HDMI2.1 cable(<3M) from HDMI source devices to HDMI Splitter input.
- Connect one HDMI 2.1 cable (<3M)from each display (monitor or projector) to the HDMI Splitter outputs.
INSTRUCTION
EDIT SETTING
SPECIFICATIONS
TROUBLESHOOTING
- POWER: Make sure devices are powered on.
- INDICATOR: Check LED indicators of splitter are on
- DEVICES: Make sure the picture can be shown normally when connecting the HDMI source to display devices directly.
- CABLE: Plug in and out HDMI 2.1 cable or change another
- HDMI2.1 cable. HDMI 2.1 cable less than 3 meters is best.
- COMPATIBILITY: Please test other sources and display devices to determine whether it is a compatibility issue.
NOTES
Please use this machine based on the below instructions to keep a longer
lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, fall
- Touching the device with wet hands is prohibited.
- Please turn the power off when the machine is not used for a long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before powering on, please check the connection cable carefully.
- And make sure that all interfaces are normally connected.
DISCLAIMERS
The information in this manual has been carefully checked and is believed to
be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any
infringement of patents or other rights of third parties that may result from
its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies
that may be contained in this document. EZCOO TECHNOLOGY INC. also does not
commit to
updating or keeping current the information contained in this document. EZCOO
TECHNOLOGY INC. reserves the right to make improvements to this document
and/or product at any time and without notice.
CONTACTS
When you need any technical assistance, please send e-mail to
support@easycoolav.com
Visit to learn more.
https://www.easycoolav.com
EZCOO TECHNOLOGY INC
support@easycoolav.com
https://www.easycoolav.com