AGM ML12 ALD001 3D Printing Moon Light User Manual
- June 14, 2024
- AGM
Table of Contents
**AGM ML12 ALD001 3D Printing Moon Light User Manual
**
Product Overview
To make the lights working please charge before using
Charge light
Red light on indicates in-charging state Red light off indicates full-charged state
Touch-sensitive switches
Touch 1 second to switch light color
Touch more than 1 second to adjust the brightness of the light
Assembled wood support
topper or magnet assembly method
Notice
If the charge is completed, the touch still doesn’t work, please wait for 1 minutes before using.
Accessories
3.5mm DC cable
parameter
Battery
Capacity: 350-800MHA
Charge: 3-6H
Material
Material: PLA
Feature: Biodegradable
- Due to the installation of the circuit required, the sphere edge will have seam (as shown).
- D printing forming principle causes the object surface to have the contour line phenomenon.
- This product does not have waterproof ability, not strong acid, alkali.
- This product can not be strongly hit or fall from high places.
Charging guidance
The standard USB interface (DC5V) can be used for charging lunar lights. Such as computers, mobile phones, chargers and so on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>