AGM 1140004 LED Portable Lamp User Manual

: June 14, 2024
: AGM

Table of Contents

AGM 1140004 LED Portable Lamp
Product Information
Product Usage Instructions
Package Contents
Specifications
Introduction
Operating Instruction
Precautions
Technical Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AGM 1140004 LED Portable Lamp

Product Information

Model	1140004
Package Contents	LED Portable Lamp Operator’s Manual

LED Portable Lamp
Operator’s Manual & Warranty Registration Card
USB Type-C to Type-A Glass Cleaning Adapter Cable
Cloth
Specifications| Name: LED Portable Lamp
Input: 5V 2A
Power: 1.5W+0.5W
Materials: ABS+Glass
Model: 1140004
CCT: 3000K+2400K (Warm White+Warm Yellow)
CRI: Ra90
Finish: Painted
Description| The LED Portable Lamp is a classic design turned modern with
the ability to perform digital programming while using its gravity
and airflow sensing technology. It mirrors the lamp powered by oil
or kerosene from the old days, in addition to having the ability to
have the base lit up. Simply add ambiance to your room by adding
the warm glow of a lamplight and produce interactive fun, with a
pleasant atmospheric experience.

Product Usage Instructions

Before turning on the portable lamp fixture, it’s suggested that the portable lamp be charged for 6 hours to full capacity at 100%, which will enable 8 hours of working use.
To charge this product, locate the Type-C charging port on the fixture. Use the included USB Type-C to Type-A cable and insert it into the charging port.
Connect the other end of the cable to a 5V 2A adapter (NOT included) and plug it into a power socket.
Once fully charged, the lamp is ready for use.
To turn on the lamp, use the rotary knob switch. The lamp has different dimming stages:
Dimming Stages| Lamp A| Lamp B
---|---|---
(A+B) 50%| 50%| 50%
(A+B) 100%| 100%| 100%
(A+B) 15%| 15%| 15%
(A) 100%| 100%| 0%
(B) 15%| 0%| 15%
(A) 50%| 50%| 0%
(B) 50%| 0%| 50%
(A) 15%| 15%| 0%
(B) 100%| 0%| 100%
OFF| 0%| 0%
The lamp also features a gravity sensor. When the fixture is shook or rocked gently, the lamp simulates a swaying candle light.
The lamp has an airflow sensor. When the lamp is on, blowing air towards the airflow sensor will turn off the light. Use the rotary dimming switch to turn on the fixture again.

Precautions
Please make sure that you have the following information on hand:

Model number: 1140004

Important Note:
Please do not send your product to our address without a request from our service team. The costs and the risk of loss for unsolicited mailings are borne by the sender. We reserve the right to refuse to accept unsolicited consignments or to return the relevant goods to the sender freight collect or at the sender’s expense.

Package Contents

Specifications

Name: LED Portable Lamp
Input: 5V 2A
Power: 1.5W+0.5W
Materials: ABS+Glass
Model: 1140004
CCT: 3000K+2400K (Warm White+Warm Yellow)
CRI: Ra≥90
Finish: Painted

The LED Portable Lamp is a classic design turned modern with the ability to perform digital programming while using its gravity and airflow sensing technology. The Old Days LED Portable Lamp, mirrors the lamp powered by oil or kerosene in addition to having the ability to have the base lit up. Simply add ambiance to your room by adding the warm glow of a lamplight and produce interactive fun, with a pleasant atmospheric experience.

Introduction

To ensure proper operation, please read the operator’s manual carefully before using this product. Please keep this manual in a safe place for future references.

Operating Instruction

Before turning on the portable lamp fixture, it’s suggested that the portable lamp be charged for 6 hours to full capacity at 100%, which will enable 8 hours of working use. To charge this product, on the fixture lies a Type-C charging port, using the included USB Type-C to Type-A cable, insert into a 5V 2A adapter (NOT included), then plug it into a power socket.

When the light flickers or the lamp is automatically turned off, please charge the fixture.

Turn the lamp fixture off before charging.

Please charge the lamp fixture using a standard 5V 2A adapter.

Green light indicates full charged
Red light indicates lamp is charging

Rotary Knob Switch

1-3 Stage Lamp A is lit from dark to light.
4-6 Stage Lamp A and B is lit from light to dark.
7-9 Stage Lamp A is turned off and the lamp B is lit from dark to light.

Dimming Diagram Of Switch

Gravity Sensor

The lamp simulates a swaying candle light when fixture is shook or rocked gently.
The light goes out when fixture is tilted at an angle more than 60°.

Please note that slight noise may be heard from the fixture when shaking.

Airflow Sensor
When the lamp fixture is on, blowing air towards the airflow sensor will turn off the light. Use the rotary dimming switch to turn on the fixture again.

Precautions

The damaged power cord must be replaced by the manufacturer, agent service provider or qualified electrician.
Please ensure that the working voltage of the light fixture corresponds to local voltage requirements. Using inappropriate voltage may cause damages to the product and bring hidden safety risks.
Do not discard the product as household waste. Please dispose of the discarded as electronic products in accordance with local laws and regulations.
Product should be kept in ambient temperatures, between -10℃~45℃.
When the fixture has not been in use, please charge the battery every three months to avoid battery self-discharge and damage to the battery.
Avoid using bare hands to reduce surface scratches and stains. Please carefully and gently wipe the surface with the included cleaning cloth.
To clean the light fixture properly, please refrain from using abrasive or soluble cleansers, to avoid damaging or corroding the surface.

Technical Support

Whenever possible , please consult the troubleshooting steps provided in the manual first, or visit the our website as normally they have abundant information to troubleshoot the problem you might have. If all else fails, and you believe the product is faulty, please contact us for details.

For technical questions, information about our products and to order spare parts, our service team is at your disposal as follows:

Service time: Monday to Friday from 9 a.m. to 6 p.m.
E-Mail: service@agmlight.com.
URL: http://www.agmlight.com.

Please make sure that you have the following information on hand

Operation manual
Model number (this can be found on the cover of this manual)
Description of the accessories
Accessory number
Proof of purchase with date of purchase
Order number

Important NOTE:
Please do not send your product to our address without a request from our service team. The costs and the risk of loss for unsolicited mailings are borne by the sender. We reserve the right to refuse to accept unsolicited consignments or to return the relevant goods to the sender freight collect or at the sender’s expense.