MOUNTUP MU2007 Single Monitor Wall Mount Instruction Manual

June 14, 2024
MOUNTUP

MOUNTUP-LOGO

MOUNT UP MU2007 Single Monitor Wall Mount

MOUNTUP-MU2007-Single-Monitor-Wall-Mount-PRODUCT

Product Information

The YZ2231_EU1.0 is a wall mount designed for use in wood studs or solid concrete walls. It is not suitable for installation into drywall alone. The wall must be capable of supporting five times the weight of the monitor and mount combined. This product contains small items that could be a choking hazard if swallowed.

Safety Caution

  • Please read the installation instructions carefully before installation.
  • If you have any doubts about the safety of the installation, assembly, or use of this product, please contact us.
  • Verify all parts are included and undamaged before starting assembly. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team.
  • Never use damaged parts.

Product Dimensions

  • Width: 1.65″ / 42mm
  • Height: 6.65″ / 169mm
  • Depth: 5.2″ / 132mm
  • Weight: 3.54″ / 90mm

Additional Specifications

  • Weight Capacity : 1927~.62~8101mm
  • Mounting Hole Pattern: 58mm x 324..9.9545///11710540mmmmmm
  • VESA Compatibility: 2.95″ x 3.94″ x 4.5″ / 75mm x 100mm x 114mm

Product Usage Instructions

  1. Ensure the wall you are installing the wall mount on is a wood stud or solid concrete wall capable of supporting five times the weight of the monitor and mount combined.
  2. Read the installation instructions carefully before starting the installation.
  3. Verify that all parts required for assembly are included and undamaged. If any parts are missing or damaged, do not proceed with the installation and contact our customer service team.
  4. Do not use any damaged parts during assembly or installation.
  5. Follow the step-by-step installation instructions provided in the user manual to correctly install the wall mount.
  • If you have any questions, please feel free to contact Customer Service via Amazon before returning.

Safety Caution

  • Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
  • This product is designed for use in wood studs or solid concrete walls.
  • DO NOT install into drywall alone.
  • The wall must be capable of supporting five times the weight of the monitor and mount combined.
  • Incorrect installation may result in product damage or body injury.
  • WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged.
  • If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!

Product Dimensions

MOUNTUP-MU2007-Single-Monitor-Wall-Mount-FIG-1

WARNING! DO NOT install into drywall alone.

Parts and Hardware

MOUNTUP-MU2007-Single-Monitor-Wall-Mount-FIG-4

NOTE: Not all parts and hardware included will be used

Tools (Not Included)

MOUNTUP-MU2007-Single-Monitor-Wall-Mount-FIG-8

Attach a VESA Plate to Monitor

Select Correct Monitor Screw LengthMOUNTUP-MU2007-Single-Monitor-Wall-Mount-
FIG-2

  • Do not tighten the screws excessively or your monitor might be damaged.

(a) Flat Back

(b) Recessed or Curved Back

Attach Arm to Wall

OPTION A: Solid Concrete Wall Installation

Position the Arm (A) at your desired height, level the wall plate, and mark the pilot hole locations.

Install Arm (A) using lag bolts (W-A), and anchors (W-B). Tighten the lag bolts until they are pulled firmly against the Arm (A).

Attach Arm to Wall

MOUNTUP-MU2007-Single-Monitor-Wall-Mount-FIG-9

Locate your studs. Verify and mark the center of the stud by finding the stud edges using awl and stud finderMOUNTUP-MU2007-Single-Monitor-Wall-Mount-
FIG-10

Install Arm (A) using lag bolts (W-A). Tighten the lag bolts until they are pulled firmly against the Arm (A).

Hang Monitor

  • Install the Upper Arm (B) to the Lower Arm (A). Secure the arm by tightening the inside screw using a 3mm Allen key (G).
  • Attach Decorative Covers (C) to the wall plate.MOUNTUP-MU2007-Single-Monitor-Wall-Mount-FIG-11
  • Slide the monitor onto the head of a swivel arm, and install the security bolt (F).
  • Make sure the security bolt is installed before you rotate the monitor

Adjustments If necessary

Tilt Adjustment

  1. Loosen the tilting bolt.
  2. Adjust the monitor to your desired tilt angle.
  3. Retighten the tilting bolt to fix the intended angle.

Tension Adjustment

The gas spring is pre-set for a load-bearing range of 4-6KG. For the intended functioning of the mount, you will need to adjust the tension of the Arm in accordance with your monitor weight by 6mm Allen Key (H).

Note: Be sure to keep the arm in a horizontal position during adjustment.

  • Situation 1: If the arm falls down
  • Solution: Turn the inside screw counterclockwise to increase tension.
  • Situation 2: If the arm rises up
  • Solution: Turn the inside screw clockwise to decrease tension.

Cable Management

Run cables through bottom of the arm.

Adjust monitor position and rotation

Note: To ensure stability, the tightness of the rotating axis has been preset, so it would be kind of difficult to rotate the VESA plate.
Suggestion: Please attach the monitor first, then hold the sides of it with both hands and rotate vigorously. If that doesn’t work out, please do not hesitate to ask for our help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals