TOZO X1 Wireless Earbuds User Manual

www.tozostore.com
golden X1 User Manual

Thanks for choosing our products

The earbuds provides you with the extrordinary experience of stable voice call and peaceful music sound in noisy surroundings with fashionable appearance and multiple functions, making them a great choice for you while working, going out and driving.

Origx

The exclusive sound technology developed by TOZO’s acoustic experts, achieving the golden frequency response curve in line with the characteristics of the human ear canal with an original lossless sound effect.

Truly wireless Active Noise Cancellation technology

With the technology of earbuds, you can select compatible communication devices without using cables.  Using active noise cancellation technology, the microphones collect the noise, then the acoustic engineercalculates and designs a series of software and hardware algorithms, the circuit generates a reverse sound wave that is opposite to the noise and emits it through the horn. Finally, the noiseand the reverse sound wave cancel each other.

Specifications

Model: X1
Impedance: 28Q
Frequency Range: 12~44.1KHz
Earphone Battery Capacity: 55mAh«2
Charging Box Battery Capacity: 500mAh
Charging Time of Earphone: 1.5H
Charging Time of Charging Box: 2.5H

Overview and packing list

Package contains TOZO Golden X1 earbuds, s charging case, 6 sizes of ear buds (the M size ear buds are pre-installed on the earbuds), USB-C charging cable, and instructions.

Earbuds function diagram

Touch control prompt

Please use the touching panel to control the earbuds.
The sensing area Is located in the earbuds handle’s upper part.

Wearing earbuds

tn order to obtain a better nolse cancaltation effect, the wearing angle can be adjusted appropriately after wearing, so that the earbuds is slightly pushed Into the ear canal.

Choose the right earbuds

Appropriate sizes of ear buds are assential to noise cancellation experience, sound quality and comfort.  Please try on different sizes of earbuds. Please note that you may need to use different sizes of earbudsfor your left and right ears,

Poweron/olt

Auto power on
Open the cover of the charging case, the earbuds will power on automatically.
Auto power off
Put the earbuds into the charging casa, close the cover, and the earbuds will power off automatically.
Another method of power off
Hold L or R for 5 seconds will power off wh

Earbuds pairing

In order for convenient use, the pairing between left and rignt earbuds has been completed before leaving from factory.
When the cover is opened, earbuds would turn on and pair with each other automatically, and enter connection or pairing status.

Bluetooth pairing

1. Open the charging case, the left and right earbuds are automatically turned on and connected to each other.
2. Search for the Bluetooth pairing name [TOZO Golden X11] in the device and select it to complete the pairing.
3. When used again, the left and right earbuds will automatically reconnect to the last connected device.
4. For single earbuds use, pick up one side and keep the other side closed in the charging case. After the earbuds which is taken out failed to reconnect, it will enter the reconnecting mode after 2 seconds, and pairing coexistence with other device. After  connecting the phone, take out another earbuds and enter binaural mode automatically.
5. If stay in the pairing or reconnecting state for 5 minutes in Active Noise Cancellation or Transparency mode, earbuds will enter the standby mode automatically. If stay in the pairing or reconnecting state for 5 minutes in normal mode, earbuds will turn off automatically.

Another method of pairing
Open the charging case, keep the earbuds in the charging case, hold the charging case button 3s to force the earbuds to enter pairing status, then do steps 2 and 3 above.
NOTE: While the left and right earbuds are disconnected, put the earbuds in the charging case(open charging case), hold charging case button for 15 seconds to pair the left and right earbuds, then keep the lid open and wait for 10 seconds before removing the earbuds.

 Bluetooth multipoint feature

Bluetooth multipoint allows earbuds to maintain simultaneous connections to two source devices like a phone, pad, and laptop.
Connect your TOZO Golden X71 to device A first, then turn off the Bluetooth on device A, so that you can search and connect the same Bluetooth name [TOZO Golden X1] on your device B, then turn on the Bluetooth on device A to automatically re-connect. Now the two devices are connected to TOZO Golden X1 at the same time.
Note: The TOZO Golden X11 will play music from your last-operated device.

Bluetooth lost

1. Turn off mobile phone’s Bluetooth earbuds will enter the pairing mode and do not connect back. ( If stay in the pairing or reconnecting state for 5 minutes in Active Noise Cancellation or Transparency mode, earbuds enter the standby mode automatically. If stay in the pairing or reconnecting state for 5 minutes in normal mode, earbuds turn off automatically.)
2. If the connection range is exceeded, it will enter the back-connection mode, and can pair with other devices at the same time. ( If stay in the pairing or reconnecting state for 5 minutes in Active Noise Cancellation or Transparency mode, earbuds enter the standby mode automatically. If stay in the pairing or reconnecting state for 5 minutes in normal mode, earbuds turn off automatically.)
3. Touch operation (operation in wearing of double earbuds)”

Double tap the “L” sensing area (“L sensing area” abbreviated as “L”), then skip to the previous song.
Tap the “R” sensing area (“R sensing area” abbreviated as “R”) to play or pause music.Double tap the “R” to skip to the next song.Long press the “L” to decrease the volume when playing. Long press the “R” to increase the volume when playing.

Touch operation (Operation in wearing one earbuds)

Double tap the “L” sensing area (“L sensing area” abbreviated as”L”), then skip to the previous song.
Tap the “L” or “R” sensing area to play or pause music.Double tap the “R” to skip to the next song.

Active Noise Cancellation Control

Tap the”L” once to switch between Transparency mode / Active Noise Cancellation mode.
Triple tap “L” to switch back to Normal mode.The Active Noise Cancellation function are not available when using single earbuds.

Calling control

Tap “L” or “R” sensing area to answer the call or it will answer the call automatically.
Long press “L” or “R” for 2 seconds the sensing area to hang up the call.Long press “L” or “R” for 2 seconds the sensing area to reject the call.

Voice assistant

When using single or double earbuds, triple tap “R” then wake up voice assistant.

Reset

If you accidentally get only one earbud work, or fails to pair each other, please reset it:

1. Place the earbuds into the charging case.
2. Press and hold the case button for 15 seconds, then keep the lid is open and wait for 10 seconds before removing the earbuds.
   Note: In case there is [Connection Unsuccessful] in your devices, please delete all historical records of [TOZO Golden X1] and try the paring process again.

Low battery alarm

When the battery power is low, it will be reminded once every 2 minutes until the battery power is run out and turn off.

Earbuds charging

Put earbuds into the charging case to charge automatically.

Wireless charging case

Designed for modern life, you could use either charging cables or wireless charging pad for charging,

Display of charging case power

Click / double click the button of the charging case: indicators displays the battery level of the charging case for 3s; opening the charging case without earbuds in charging case, indicators displays the battery level of the charging case for 3s. Opening the charging case with earbuds in charging case, indicators displays the battery level of the charging case for 5s.

Indicator status

flashes quickly (flashing once in 0.5 seconds) Connection successfully: light goes off
Incoming call| The indicator light flashes every 2 seconds.
Earbuds charging| The earbuds are automatically charged when put into the charging case.
Charging| LED Indicator when charging:
< 20% – Orange Breathing Light

20% – White Breathing Light
100% -White LEDon

TOZO APP

Download the TOZO App for Ul customization, EQ settings and more.

• Ul customization: Most of the controls can be customized in the App.
• EQ settings: There’re lots of EQ settings you can choose in the Appo optimize your experience while enjoying different music genres.
• Earbuds firmware update: The earbuds firmware can be updated in the App. You will be informed once the new version of firmware is detected when you connect the earbuds with the App.
  

TOZOAPP pairing

Step 1:
Download the TOZO App on your phone. Step 2:
Bluetooth pairing with your earbuds. Step 3:
TOZO App pairing with your earbuds.

Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories,
please visit:www.tozostore.com
For any assistance please contact Email: info@tozostore.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>