TOPTRO TR25 MINI Multi Media Portable Projector User Manual

TOPTRO TR25 MINI Multi Media Portable Projector

TOPTRO Lifetime Professional Support

Dear customer,
Thank you very much for supporting TOPTRO.
Please read this manual thoroughly before using the projector. If you have any issues, email your order number and the problem to service@toptro.com. We will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, Bluetooth connection failed, WiFi connection failed, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can been solved. And give us an opportunity to improve. We guarantee we will provide you a satisfactory solution.
Thanks for your understanding!
Best regards
TOPTRO Service Team

TIPS

1. Do not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be S°C ~35°C better.
2. The ventilation is equipped for the projector to work stably. Don’t cover the vent with cloth, blanket or other things. Don’t insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
3. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
4. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

PACKAGE LIST

PROJECTOR SPECIFICATIONS

PROJECTOR OVERVIEW

REMOTE CONTROL

Note:

1. lnstall 2 pieces of AAA batteries into the remote before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
3. lf you are not using the remote controller for an extended period, please take out batteries to prevent batteries leakage.

INSTALLATION

Installation Method
The projector can be placed on the stable desk to project the image like following methods:

Projection Distance and Size

The recommended projection distance is about 5.9ft.
The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.

STARTING PROJECTOR

Turn on the projector: Connect to the power cable, when the red indicator light is on, press the power button on the panel ( Press the power key on the remote control ) to start the projector, the indicator turns from the red to blue, the projector is on.
Turn off the projector: When the projector is working normally, press the power button, the indicator turns from the blue to red, the projector is in shut down.

IMAGE ADJUSTMENT

1. Electric Focus Adjustment

Place the projector lens perpendicularly to the projection screen or curtain wall, and press the F+/F- key on the remote control or the projector panel, until the image is clear, that means the image focusing is finished.

Note: If it is still blurry, please try to adjust the projection distance.

SETTING UP THE PROJECTOR

The projector’s home page is as follow.

Select The Input Signal Source

Select the desired input signal source (USB/ HDMI) on the home-page.
Note: If you connect the external device ( Such as TV box, Fire TV Stick, DVD Player, USB flash disk, Computer ect.) , please must select the corresponding signal source. If you choose wrong, the projector will show no signal.

Multimedia Play

USB Disk Input Mode

Step1: Insert the USB flash disk into the USB port of the projector.

Step2: Select “Media” and the press the “OK” key to enter.

Step3: Depending on the file type, select the option [Movie/Music/Photo/ Text]

Step4: Select the desired file in the USB disk (or enter the sub-folder folder), and then press the [OK] button to play it.

Warm Tips: If the projector cannot recognize the USB disk, please refer to the following methods to solve the problem.

Please confirm whether your USB disk meets the following formats.

1. FAT32:8G/16G/32G
2. NTFS: 64G

If it is not, please format the USB disk. Before you format the USB disk, if you have anything on your USB disk, make sure to backup everything. After these steps, everything will be lost forever.

How to convert USB disk format to FAT32 format?

1. Plug-in your usb disk into the computer’ s USB port.
2. Open up File Explorer and right-click on the drive.
3. Choose Format.
4. In the File System dropdown, please choose the FAT32 format.
5. Click Start and close this window when finished.

If the problem is still not solved, please send your problem to this email: service@toptro.com

Play Interface
Click the “OK” button to get the play interface.

WiFi Setting

Wireless Connection

Warming Tips:

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of lO0Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to contact us via service@toptro.com

iOS Cast ( for iOS Devices)

1. Go to home page — Select the [Setting] menu — Select the [WiFi] menu — Select your home WiFi from the list — Connect the TR25 projector to your home WiFi.
2. Back to home page — Select [Airplay] menu — Press the OK button to enter the [Airplay] menu.
3. Select the [Settings] menu on your iOS device — Turn on the [Wi-Fi] function — Connect your iOS device to the same home network as the projector.
4. 0pen the [ Control Center ] on your iOS device — Select the [ Screen Mirroring ] function — Select and connect the iOS Cast receiver named [ TR25-Airplay-XXXX] — your iOS device screen will be displayed on the projection screen after 3 seconds.

Miracast ( for Android Devices)

1. Go to home page — Select the [ Miracast ] — Press the OK button to enter the Miracast setting menu.
2. Select the [ Settings ] menu on your Android device — Select the [ Screen mirroring ] function — Select your Miracast receiver named [ TR25-Miracast-XXXX] — your Android device screen will be displayed on the projection screen after 3 seconds.
3. 0n your Android device, tap [Settings] -[ WLAN Display] -Turn [ Wi-Fi ] ON, Connect your home WiFi.

Note:

1. Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone’ s manual. [ Multi screen/Wireless display/WLAN display/Screen mirroring/Wireless projection/Smart view etc.]
2. Not all Android phones support this function. Please make sure it is supported before use.

DLNA (Software with TV Icon)

1. Go to home page — Select the [ Setting] menu — Select the [ WiFi ] menu — Select your home WiFi from the list — Connect the TR25 projector to your home WiFi.
2. Back to home page — Select [ DLNA] menu — Press the OK button to enter the [ DLNA] menu.
3. 0pen your video player software.
4. Click the TV icon, select and connect the projector name.
5. The mobile phone can exit the video player software playback interface, and the projector will continue to play.

Bluetooth Setting
Go to home page — Select [ Setting ] — Select the [ Bluetooth ] . Enter the Bluetooth settings interface– Scan the Bluetooth devices nearby automatically– Choose the Bluetooth device desired — it will be paired and connected automatically.

Note:

1. The TR25 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.
2. lf you have any question, please feel free to contact us via service@toptro.com

Projector Setting

Picture Menu
Go to home page — Select [Setting] — Select the [ PICTURE ] .Use the arrow keys on the remote control to switch the menu, press the “OK” to confirm and set.

Sound Menu
Go to home page — Select [ Setting] — Select the [ SOUND] .Use the arrow keys on the remote control to switch the menu, press the “OK” to confirm and set.

Option Menu (ZOOM & Keystone correction)
Go to home page — Select [ Setting ] — Select the [ OPTION ] .Use the arrow keys on the remote control to switch the menu, press the “OK” to confirm and set.

SIGNAL LINES CONNECTION

TOPTRO TR25 projector has 3 interfaces, HDMI portl/ USB port2/ 3.5mm headphone output. Please select the correct connecting port to connect your device (PC, DVD Player, Fire TV stick, TV box, Sound bar, USB disk, PS4 etc.)

1. Connect USB Disk

2. lnsert the USB disk into the USB input port;

3. You can directly enter the start-up screen on the home page, select the option [ Movie/Music/Photo/TEXT]

4. Select the desired file (or folder to enter the sub folder) in the USB disk, then press the [OK] button to play it.

5. Connect the Devices via the HDMI port

6. Connect your Fire TV stick ( or PC, TV box, PS4 etc.) to the HDMI port of the projector;

7. Enter the home page to select the corresponding HDMI as the signal source.

8. Connect to the DVD Player

9. Turn on your DVD player and the projector;

10. Connect to the DVD Player and the projector with the HDMI cable

11. Enter the home page to select the corresponding HDMI as the signal source.
    Note: When the projector is connected to the DVD player via the HDMI cable, if there is no sound, it may be that the output signal of the HDMI port of the DVD player is not compatible with HDCP, please try to connect your Sound bar/Speaker.

12. Connect to the Sound bar/Speaker
    If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows.

13. Connect to the Computer

14. Connect to the computer and TR25 projector with the HDMI cable (Included).

15. .Select the HDMI source to project any files on your computer;

16. .0n your laptop, hold down the key “Win+P” board keys to change your display mode.

• Computer only: it is the default option – only displays on the main monitor.
• Duplicate: makes all of the monitors display the same thing duplicating the desktop on each monitor.
• Extend: makes all of your monitors act like one big monitor extending the desktop across all of them.
• Projector only: Displays only on the secondary monitor like a projector. You can change the screen resolution on the Projector Only Mode
• Step: Start> Control Panel > Appearance and Personalization > Adjust Screen Resolution

WARRANTY

Thank you so much for your purchase and support. We provide 3-year warranty for TR25 projector. If you have any questions, please feel free to contact us via service@toptro.com

Note: We have prepared a gift for you. You can choose one of the gifts below. If you want it, please contact us via service@toptro.com

1. Simple projector screen: 100 inch
2. Mini Bluetooth speaker

service@toptro.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>