Anker D0413X NEBULA Mars 3 Outdoor Portable Projector User Manual
- June 14, 2024
- Anker
Table of Contents
Anker D0413X NEBULA Mars 3 Outdoor Portable Projector
Important Safety Instructions
Read all instructions before you use this product. Do not make any changes or create settings that are not described in this manual. If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply
- Setup
- Do not use the product in any way other than described herein in order to avoid personal injury or property damage.
- Do not place this product on soft surfaces such as tablecloths or carpets, otherwise, the product could be a fire hazard.
- Do not place this product in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
- To prevent overheating, do not block or clog the ventilation openings.
- Never place this product in a confined space. Always leave enough space around this product for ventilation.
- Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments.
- When this product is running for a long period of time, the surface may become hot. If this occurs, shut it down immediately and unplug the charger. Resume operation after the product has cooled down.
- Always handle this product with care. Avoid touching the lens.
- Do not allow children to handle the product without supervision.
- Do not place heavy or sharp objects on this product.
- To avoid electric shock, do not disassemble the product.
- Avoid extreme vibrations as they may damage the internal components.
- Please ensure you use only the adapter offered by the manufacturer. Using an unauthorized adapter may be dangerous and violate the Terms of Use and product warranty
- Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators’ legal liability under any circumstances.
Hearing Safety
- To prevent hearing damage, do not listen for extended periods at high volume. Set the volume to a safe level.
Charging
- The adapter is for indoor use only.
- For pluggable equipment, the socket outlet shall be easily accessible.
- Due to the enclosure material, the product must only be connected to a USB 2.0 or higher.
- It is recommended to charge the product in an environment with a temperature that ranges from 5°C~25°C / 41°F~77°F.
- When supplying power, place the device in an environment with a normal room temperature and good ventilation.
Battery
-
The remote control contains batteries, which are a choking hazard.
Keep the remote control out of the reach of children. -
Remove the batteries when the remote control has not been used for a long period of time.
-
Replace the remote control batteries only with the same or an equivalent type.
-
Batteries contain chemical substances and they should be disposed of properly.
-
Charge this device regularly. Do not store this device with a completely discharged battery
Warning
- Replacing a battery with an incorrect type may defeat safeguards and create danger;
- Disposal of the battery/device in a fire or a hot oven or other source of significant heat, or mechanically crushing, or cutting of the battery/device, may result in an explosion;
- Leaving the battery/device in an extremely hot environment may result in an explosion or leakage of flammable liquids or gases;
- The battery/device subjected to extremely low air pressure may result in an explosion or leakage of flammable liquids or gases.
Cleaning
- Use a soft, lint-free cloth. Never use liquid, gaseous, or easily flammable cleansers to clean.
- Do not use any liquid cleaning agents to clean the lens to avoid damaging the film coating on the lens.
- Wipe surfaces gently. Be careful that you do not scratch the surface.
- Use lens cleaning paper to clean the lens.
Repairs
- Do not make any repairs to this product yourself.
- Improper maintenance can result in injuries or product damage.
- Refer all servicing to qualified service personnel.
What’s Included
-
Nebula Mars 3
-
Remote Control
-
AAA Battery × 2
-
Power Adapter
-
Power Cord
Note: The plug type varies by region.
- Quick Start Guide
At a Glance
Projector
Front View
- Sensors (for autofocus and auto keystone correction)
- Handle
- Lens
- Lens cover
- Slide down to turn on and automatically adjust focus
- Slide up to turn off
- Loudspeaker
Rear View
-
LED screen
- Indicates current battery level and power mode
-
Power mode button
- Press to switch power modes when the projector is on
- Press once to check the battery level when the projector is off
- Press and hold for 2 seconds to enable charge-out when the projector is off
-
Ambient light button
- Press to turn the ambient light on / off
- Increase brightness
-
Ambient light
-
Air ventilation (outlet)
-
DC IN port
- Connect to power supply
-
USB-C port
- Connect to a USB drive
- Charge an external device as a power bank
-
USB-A port
- Connect to a USB drive
- Charge an external device as a power bank
-
HDMI port
- Connect to a playback device via HDMI output
-
AUX-OUT port
- Connect to an external sound output device
-
Reset button
- Press to reset your projector
Top View
- Volume up / down buttons
- Return button
- Bluetooth speaker button
- Press to enter or exit Bluetooth speaker mode
- Navigation / confirmation buttons
Bottom View
- Adjustable stand
- Air ventilation (inlet)
Dimensions
250 (L) × 160 (W) × 260 (H) mm / 9.8 (L) × 6.3 (W) × 10.2 (H) in
Remote Control
- Adjust focus
- Navigation
- Return to the previous menu
- Power on / off or switch to standby mode
- Activate the Google Assistant
- Confirm a selection / Pause / Resume
- Access more options
- Access the home menu
- Volume up / down
Nebula RC
Model: D0413X
Charging
Charge Your Projector
Before using it for the first time, fully charge the built-in battery using
the provided adapter and power cord.
The LED screen will light up when the battery is being charged.
Check Battery Level
The projector’s LED ring indicates the current battery level.
To check the battery level when powered off, press the power mode button.
LED Ring| | | | |
---|---|---|---|---|---
Battery Level| <20%| 20% – 40%| 40% – 60%| 60% – 80%| 80% – 100%
Power Mode
Press the power mode button to switch power modes when the projector is powered on.
| AI Mode: Adjusts
the display brightness based on ambient brightness.
---|---
| Eco Mode: Lowers
the display brightness to 300 lumens to extend playtime.
| Standard Mode:
Sets the display brightness to the highest level.
Charge External Devices
Charge an external device through the USB port when the projector is powered
on.
To enable or disable charge-out when the projector is powered off, press and hold the power mode button for two seconds.
Getting Started
Prepare the Remote
① Slide to open the battery compartment.
② Insert new batteries matching the polarity (+/-) and close the battery
compartment.
③ For first-time use, follow the on-screen instructions to pair the remote
with your projector.
The distance between the remote and the projector should not exceed 10 m / 33 ft.
Position Your Projector
Place the projector on a stable, flat surface in front of the projection
surface. For the best results, the projection surface should be white and
flat.
- It is unnecessary to tilt the projector towards the projection surface. You can correct the projection image with the built-in autofocus and auto-keystone correction.
- The distance between the projector and the projection surface determines the projection image size. For the best result, position the projector 0.8-5.3 m / 2.62-17.39 ft away from the projection surface to get a screen size of 30-200 inches.
Screen Size | Distance Between Projector Lens and Screen |
---|---|
30 inches | 0.8 m / 2.62 ft |
50 inches | 1.33 m / 4.36 ft |
80 inches | 2.1 m / 6.89 ft |
100 inches | 2.65 m / 8.69 ft |
120 inches | 3.20 m / 10.50 ft |
150 inches | 4.00 m / 13.12 ft |
200 inches | 5.30 m / 17.39 ft |
Power On / Off
Slide the lens cover down to turn on the projector, and slide up to turn it off.
- You can also press and hold the power button on the remote for 3 seconds to power off.
- When powered on, press the power button on the remote to switch to standby mode.
- In HDMI Source Mode, the projector will switch to standby mode after 10 minutes of button inactivity or when no signal is detected.
- When standby mode lasts for 30 minutes, the projector will automatically power off.
Auto Image Correction
Auto image correction includes autofocus, auto keystone correction, and auto
screen fit. These features can be enabled in three ways: by powering on the
projector, by pressing on the remote, or by slightly moving the projector.
To set your auto image correction preferences, go to > [Projector
**Settings] > [Image Correction].**
Setup
When using the projector for the first time, follow the on-screen display (OSD) instructions to complete the basic setup.
- Pair the remote with your projector
- Select your language
- Set up your TV with your Android phone (optional)
- Connect to Wi-Fi
- Sign in with your Google account
Nebula Connect App
To easily control the projector, we recommend you download the Nebula Connect app.
① Download the Nebula Connect app from the App Store (iOS devices)
or Google Play (Android devices).
② Enable Bluetooth on your smartphone.
③ Open the Nebula Connect app and select [Mars 3 XXXXXX] as the device to
be connected.
④ Follow the on-screen instructions to complete the connection setup.
Settings
Go through the setup process when you power on the projector for the first time.
Network
This projector can be connected to the Internet via a wireless (Wi-Fi)
connection.
① On the home screen, select > [Network & Internet] and press .
② Follow the on-screen instructions to complete the network connection.
Projector
On the home screen, select > [Projector Settings] and press .
Brightness| AI Brightness: Automatically adjusts the display brightness based on the ambient brightness.
Eco: Lowers the display brightness to 300 lumens to extend playtime.
Standard: Sets the display brightness to the highest level by default. You can also adjust the brightness manually.
Auto: Switches to standard mode when being charged, and to eco mode when disconnected from the power supply.
---|---
Picture| Picture Mode: The projector comes with several predefined
picture modes so that you can choose one to suit your environment and input
source.
- Standard: Keeps natural-looking colors with a balance of warm and cool tones.
- Movie: Provides the best colors for watching movies.
- Bright: Increases the brightness and response time level for gaming.
- Custom: Manually set the contrast, saturation, sharpness, color temperature, wall color, and gamma, or reset the values.
Expert Settings: Customize advanced settings to enhance image quality.
- DNR: Reduces digital noise on-screen.
- MPEG NR: Eliminates image noise when playing an MPEG-compressed video.
- DI Film Mode: Creates high-definition images encoded at 24 frames per second.
- MEMC: Inserts additional frame between original frames for smoother motions.
Image Correction| Auto Keystone Correction Settings: Trigger auto keystone correction by remote, at startup, or after movement.
Manual Keystone Correction: Manually perform keystone correction by adjusting each corner.
Auto Screen Fit Settings: Trigger auto screen fit by remote, at startup, or after movement.
One-Click Screen Fit: Automatically adjust the image size to your surface.
Zoom: Zoom in or out of the projection image from 50% to 100%.
Focus Settings| Auto Focus at Startup: Automatically adjust the
focus when the projector powers on.
Auto Focus After Movement: Automatically adjust the focus when you move the projector.
Manual Focus Correction: Enable manual focus correction.
Sound| Sound Mode: The projector comes with several predefined sound modes so that you can choose one to suit your environment and input source.
- Music: Enhances the treble for listening to music.
- Movie: Creates a surround-sound listening experience for watching movies.
- Outdoors: Increases volume for playing audio / video outdoors.
- Custom: Manually set audio settings such as balance, bass, and treble.
System Sound : Turn on / off system sound notifications.
Speaker Delay: To synchronize the sound with the image, adjust the sound
delay by 10 milliseconds for each operation.
Expert Settings: Customize advanced settings to enhance audio quality.
- Digital Output : Select an output audio format.
- eARC: Allows TV to send audio backward to its source device via a single HDMI cable.
- Auto Volume Control: Controls volume automatically.
Bluetooth Speaker Mode| Enable Bluetooth speaker mode.
Advanced Settings| Projector Mode: Select projector placement.
- Auto: Automatically detects whether the projector is inverted and automatically switches to an appropriate projector mode.
- Front: The device is located in front of the projection surface.
- Front Ceiling: The device is hanging from the ceiling in an upside-down position. The image is rotated by 180 degrees.
- Rear: The device is located behind the projection surface.
- Rear Ceiling: The device is hanging from the ceiling in an upside-down position behind the projection surface. The image is rotated by 180 degrees and horizontally mirrored.
Motion Settings: Set a sensitivity level to trigger autofocus and auto
keystone correction.
Keystone Calibration: Recalibrate the projector if keystone correction
doesn’t work properly.
Smart Solutions: Turn on / off auto-alerts when the projector detects an
issue.
- Projection Angle Alert: Shows an alert when the maximum projection angle is reached.
- Fine Tuning Popup: Shows a prompt to access fine-tuning after auto keystone correction.
Updates| Check for firmware updates.
Ambient Light| Turn the ambient light off or set the brightness level.
Apps
① On the home screen, select > [Apps], and press .
② Select an app and check the current version, open or force stop the app,
check the storage used, clear data or cache, uninstall the app, or enable or
disable notifications and permissions.
Device Preferences
On the home screen, select > [Device Preferences] and press .
About| Check device information, update the system, reset the device, or
rename the device.
---|---
Date & Time| Enable or disable automatic date and time, manually set date and
time, select time zone, or set time format.
Timer| Change settings for auto power-off.
Language| Select an on-screen display language.
Keyboard| Check and manage keyboards.
Input| Select HDMI as the input source, or change Consumer Electronic Control
(CEC) settings.
CEC allows your HDMI device and Android TV to control each other.
Power| Change the auto-sleep settings, turn off the current display, or set
auto power-off time when no signal is available.
Storage| Check the device storage.
Home Screen| Set the channels and apps on the home screen or check open-source
licenses.
Google Assistant| Change settings for the Google Assistant.
Chromecast| Choose to show notifications on all Android devices connected to
your Wi-Fi and let them control media casting to this device.
Screen Saver| Change the screen saver settings.
Location| Use Wi-Fi or permit apps to estimate locations.
Usage & Diagnostics| Automatically send diagnostic information to Google, like
crash reports and usage data from your device, apps, and Chromecast built-in.
Accessibility| Change the caption settings or enable accessibility service.
Restart| Restart the system or cancel.
Others
On the home screen, select to find more setting options.
Accounts & Sign-In | Sign in to make the most of Android TV. |
---|---|
Remotes & Accessories | Search for accessories for pairing. |
Using Your Projector
Select an App
Once connected to a wireless network, you can access online services, enjoy
movies, music, pictures, and browse online. You can download more apps from
Google Play.
① Press to access the home screen.
② Select [Apps] > [Get More Apps].
Voice Assistant
After setup, press the Google Assistant button on the remote, you can speak to the Google Assistant and request your commands.
Wireless Casting
You can wirelessly cast movies, games, music, and the entire screen from your iOS, macOS, Android, or Windows device to Nebula Mars 3.
Make sure Nebula Mars 3 and your device are connected to the same wireless network. The network can be a Wi-Fi network or your phone’s hotspot.
Cast In-App Content
You can cast content from apps that support Chromecast, such as
YouTube and Prime Video.
① Connect your device and projector to the same wireless network.
② Open the streaming app on your device.
③ Play a video clip and tap the cast icon on the video screen.
④ Select D2333 to connect. The projector will mirror the video screen on
your device.
Certain content cannot be cast on Nebula Mars 3 due to copyright restrictions. You can stream the content via the same app installed on your projector.
Cast Device Screen
You can cast the entire screen from your device to the projector.
① Connect your device and projector to the same wireless network.
② Install the Nebula Cast app on your projector.
③ Open Nebula Cast and follow the on-screen instructions to complete the
process.
Play from HDMI Playback Devices
The projector can be connected to various HDMI playback devices such as a TV box, TV stick, DVD player, set-top box (STB), gaming console, or other devices.
① Connect the projector to an HDMI playback device with an HDMI cable (not
provided).
② Press to access the settings menu, then select **[Device Preferences] >
[Input] > [HDMI].
**
The projector will automatically start HDMI playback once connected to an HDMI playback device for the first time.
Play from a USB Drive
With this projector, you can enjoy music, video, and pictures, or install apps
that are stored on a USB 2.0 drive.
① Download the File Explorer app from Google Play.
② Insert a USB-A or USB-C drive into the USB port.
③ Select music, videos, or photos from the USB drive that you want to play and
press .
④ Press to stop playback.
Play Through External Sound Devices
This projector can also be connected to external sound output devices, including headphones and speakers; when connected to external speakers, the built-in speaker system is disabled.
① Use a 3.5 mm audio cable or an adapter (not provided) to connect your
headphones or external speakers.
② Connect the other end of the cable to the AUX port on this projector.
- • You will hear audio from your headphones or external speakers.
Before connecting headphones and putting them on, turn down the volume to avoid hurting your ears.
Bluetooth Speaker Mode
You can use this projector as a standalone Bluetooth speaker.
① To switch to Bluetooth speaker mode, you have two options:
A: Press on the projector.
B: On the home screen, select > [Projector Settings] > [Bluetooth Speaker
Mode] and press .
② Enable Bluetooth on your smartphone and select Nebula Mars 3 to connect.
| Flashing blue| Ready to pair / Bluetooth pairing
---|---|---
| Steady blue| Bluetooth connected
To exit Bluetooth speaker mode, press on the projector or press and hold on the remote for two seconds.
Firmware Update
To fully enhance your experience with this projector with the latest features, you are recommended to update the firmware from time to time.
To update the firmware, go to [Projector Settings] > [Updates] > [Firmware Update].
Specifications
Specifications are subject to change without notice.
Input | 19V 9.47A |
---|---|
Power Consumption | 150W |
Standby Power Consumption | < 1W |
Resolution | 1920 × 1080p |
Compatible Resolutions | 480p (60 Hz), 576p (50 Hz), 720p (30 Hz), 720p |
(50 Hz), 720p (60 Hz), 1080p (24 Hz), 1080p (30 Hz), 1080p (50 Hz), 1080p (60
Hz), 4K2K (23.976 Hz), 4K2K (25 Hz), 4K2K (30 Hz), 4K2K (50 Hz), 4K2K (60 Hz),
4096 (23.976 Hz), 4096 (25 Hz), 4096 (30 Hz), 4096 (50 Hz), 4096 (60 Hz)
USB-A Output Power (Charging)| 10W
USB-C Output Power (Charging)| 15W
Contrast Ratio| 400:1
Aspect Ratio| 16:9
Screen Size| 30″ to 200″
Throw Ratio| 1.2:1
Throw Distance| 0.8-5.3 m / 2.62-17.39 ft
Light Source| LED
Focus| Auto
Keystone Correction| Auto
Speaker Output Power| 40W max
Noise| 28 dB at 25°C
Wi-Fi| Wi-Fi 2.4 GHz/5.0 GHz 802.11 a/b/g/n/ac
Bluetooth Version| 5.1
Bluetooth Range| 25 m / 82 ft
USB Format| FAT, FAT32, NTFS
Operating Temperature| 0°C~35°C / 32°F~95°F
Remote Control Batteries| AAA × 2
Troubleshooting
① Fails to Power On
- The projector may be out of power. Charge the projector for 15-30 minutes and see if the LED screen lights up.
② Cannot Charge
- Use the included adapter and power cord to charge the projector.
- Try a different adapter (at least 180W) and power cord.
③ Cannot Connect to a Wi-Fi Network
- Place your projector within 16 ft / 5 m of the router and reconnect.
- Set your router to 2.4 GHz or 5 GHz and retry.
- Restart your projector and router and retry.
- Try a different Wi-Fi network or your phone’s hotspot.
④ Blurry Image
- Slightly move the projector or press on the remote to start autofocus.
- To manually adjust the focus, go to [Settings] > [Projector Settings] > [Focus Settings] > [Manual Focus Correction], and use and on the remote.
- Adjust the projection angle and direction as well as the height of the projector if necessary.
⑤ Distorted Image
- Update the firmware to the latest version via [Projector Settings] > [Updates] > [Firmware Update].
- Go to [Settings] > [Projector Settings] > [Image Correction] > [Perform Manual Keystone Correction].
- Move the projector left or right, or alter the tilt if necessary.
⑥ No HDMI Signal
- Use a different HDMI cable.
- Connect your projector with another HDMI playback device.
- Connect the HDMI playback device to your TV with an HDMI cable to check if the device or cable are working.
- Adjust the HDMI playback device’s output resolution / frequency to be the same as the projector’s.
⑦ How to Install Netflix
- On your projector, download and install the Nebula Play app from Google Play. Open Nebula Play and select [Tips] > [Netflix Installation]. Then follow the on-screen instructions to install Netflix.
⑧ How to Control Netflix with Mouse Mode
- Install Nebula Connect on your phone and connect with Mars 3. Select Mouse mode. Use one finger to move and click, or two fingers to scroll.
⑨ How to Play Videos without Wi-Fi
- Download videos to a USB drive in FAT32 format. For the following steps, see Play from a USB Drive.
Notice
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
This product complies with the radio interference requirements of the United Kingdom.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK Declaration of Conformity is available at the following internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is NSA180EC-19094701 or KA180B-19009470H with a rated output voltage/current of 19.0VDC / 9.47A.
RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirements, maintain a 20 cm distance between
the device and the human body.
Frequency Bands and Power
Function | Bands | Operation Frequency | Max Power |
---|---|---|---|
Bluetooth (Projector) | 2.4 GHz | 2402-2480 MHz | EIRP 16.61 dBm |
WIFI (Projector) | 2.4 GHz | 2412-2472 MHz | EIRP 19.51 dBm |
5 GHz | 5150-5250 MHz | EIRP 20.13 dBm | |
5250-5350 MHz | EIRP 18.70 dBm | ||
5470-5725 MHz | EIRP 17.89 dBm | ||
5725-5850 MHz | EIRP 13.16 dBm | ||
Bluetooth (Remote Control) | 2.4 GHz | 2402-2480 MHz | EIRP 3.62 dBm |
5150~5350 MHz can only be used indoors.
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
The following importer is the responsible party (contract for UK matters):
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 20cm.
Notice: Shielded Cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Trademarks
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Warranty
30-Day Money-Back Guarantee for Any Reason
You may return your undamaged product and packaging within 30 days of purchase to receive a FULL REFUND for any reason. If the reason for the return isn’t quality-related, the customer must pay for the return shipping.
12-Month Warranty for Quality-Related Issues
Nebula’s products are warrantied to be free from material and workmanship
defects for 12 months from the date of purchase. Within this period, Nebula
will provide a replacement and cover any return shipping costs for products
that fail in normal use.
Please note: Any provided shipping labels must be used within 20 days from the
date they’re issued by Nebula Support.
References
- Nebula | Smarte Beamer
- Smart Projector - Portable Home Theater Projector- Nebula UK
- Smart Projector - Portable Home Theater Projector- Nebula UK