AIGOSTAR E27 Smart LED Bulb Instructions
- June 14, 2024
- aigostar
Table of Contents
AIGOSTAR E27 Smart LED Bulb
HOW TO USE
Smart LED Bulbs
- Thank you for buying the AIGOSTAR LED Bulb.
- Please read this manual carefully before operating this product.
APP instruction for use
Application Installation
Search “AigoSmart” in the APP Store or Google Play, or scan the QR code below
Step 2: Register
Enter the register interface, and input the email address/phone number to
register an account. Just log in if you already have an Aigo Smart account.
Step 3: Add the device to AigoSmart
Note: Please turn on Bluetooth and check if your home network is 2.4G and
make sure your mobile phone has been connected to the Wi-Fi home network
before operating. (The current devices can only support a 2.4G network, which
cannot work with 5.0G network.)
Network configuration way1: Auto discover
-
First, power on the device, and the device defaults to the network distribution mode within 10 minutes after powering on.
-
Turn on the “AigoSmart” APP, and a request for network configuration will appear on the homepage, or click the “+” button on the top right corner. 8 Choose demand enter With password to joint the network, keep your router, mobile phone near to the device as possible.
-
Wait patiently till the device is connected successfully.
The device name can be changed after connected successfully. -
The above network configuration operations should be completed within 10 minutes after powering on.
Network configuration way2: Manual network configuration
-
1. Configure the device to network configuration status
-
Power on the device.
-
Switch the device on and off three times(on-off-on-off-on)
-
Make sure the light blinks quickly. A request for network configuration will appear on the homepage or click the”+” button on the top right corner, and select the corresponding product category to add products.
Note: Make sure the indicator light blinks rapidly, if not, please cut off the power for one minute, and repeat the steps of network configuration. (Please complete the network configuration within 3 minutes.) -
Click “Add device” and add the type you needed. Choose the corresponding network connection mode(Please choose the bluetooth network configuration first).
-
Choose Wi-Fi and enter your Wi-Fi password to join the network, keep your router, and mobile phone as near to the device as possible.
-
Wait patiently till the device is connected successfully.
Step 4: Device control
- Name the device and click “confirm”, the device will show on the homepage of the APP, click the device to enter the settings page
- Please scan the QR code to get more details information on operation auidance.
Note: Some devices feature different display interfaces due to different
functions.
The free application “AigoSmart” is compatible with mobile devices. The
versions of IOS13.0. Android 5.0 (and higher) offers a better experience.
The name you give to the device will be the name for voice control on Amazon
Alexa or Google Home later. After entering the”more settings” page, you can
enter the “help center” for the latest user guides. If your problems haven’t
been solved, leave feedback, and we will wholeheartedly give you the best
service.
- Operating Frequency: 2412-2472MHz
- Maximum transmitted power: 20 dBm
WARNING: PLEASE DO NOT DROP THE LAMP OR PUSH AGAINST IT. PLEASE DO NOT DISASSEMBLE THE LAMP AND MAKE ALTERATIONS. DO NOT USE LAMPSHADES WITHOUT VENTILATION OPENINGS. CUT OFF THE POWER BEFORE INSTALLATION.
AIGOSTAR INTERNATIONAL LIMITED
Unit 4 Tees Valley Court Glenarm Road
Wynyard TS22 5FE GB GB311003583
http://www.aigostar.com
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>