VEVOR G90E 110V Spot Welding Machine User Manual

VEVOR G90E 110V Spot Welding Machine

Safety Warning Signs

Operate this protection with working conditions common sense. Before installing and operating the welder, look at the following safety precautions.

Read the instructions

• Before the operation of the machine, be free to read the product brochures in detail. Please use the original parts and accessories. When using the machine, wear a mask to avoid problems with parts exploding will cause harm.
• ****Static electricity damages the machine’s circuit board connected to a good ground, to prevent static electricity. In the movement and storage use anti-static items covered, To avoid damage to the machine.
• A splash of sparks and arcs will cause damage to the staff. Please wear a mask or with the edge of the glasses.
• Metal spatter may cause damage to the eyes of the user. Please wear a mask or a pair of glasses.
• The electromagnetic field can affect the operator’s heart, such as the heart there Install the pacemaker, please stay away from the machine.
• Metal spatter may cause damage to the eyes of the user. Please wear a mask or a pair of glasses.
• The electromagnetic field can affect the operator’s heart, such as the heart there Install the pacemaker, please stay away from the machine. Such as the need to operate the machine, and free advice advice for life.
• Please do not work for too long, will cause the machine part of the zero parts to overheat, and damage the life of the machine.
• Prevent fire Welding is completed, check the welding area with or without overheating spatter and hot metal to prevent fire.
• To prevent electric shock: Do not use the skin and wet clothes contact welding machine. around the operator who wear alick dom instancable Ground and work directly connected. In the workplace, due to welding will produce toxic gases, Pay attention to
• Ventilation, so as not to poison. (Prohibited in the closed container welding) Self-protection (CO2 welder) The use of gloves, wearing thick clothing long clothing, pants.
• Do not touch the hot workpieces by hand during welding. To prevent the explosion: flammable, explosive products away from the welding area.
• Be careful not to be crushed and bruised while moving.
• Prohibit welding at high. Prohibited: the welding power supply to do the use of pipeline thawing

Symbol Definition

Optional spare parts table

Major parts table

Note:

1. All kinds of spare parts, the user can choose a=rding to their own situation
2. When purchasing, you can contact the local dealer or service, reported number can be.

lnstallation

Specifications and parameters

welding AC1V–7V
Input power (KW)| 3
Instantaneous maximum output current (A)| 3500
Input the maximum current (A)| 20
Way of working| Automatic induction welding
Regular working hours| Automatic mode program setting
Work stalls| 7 channels 63 modes
Single–sided welding thickness (mm)| 0.6–1.2
Vacuum suction (kg)| 180
Dimensions (mm)| 430x260x360 (Host)
Weight (kg)| 25 (Host)

The work cycle and overheating protection

The working cycle of the machine is the use of repeated cycle of work, the welding cycle time for the load time and no load time and. In addition, the machine is equipped with overheating protection, when the temperature reaches the critical, the welding machine will automatically stop workng, to be cooled, you can continue to operate, as shO\Ml in the specific situation.

The installation of the machine

1. Customers receive the machine, the first package will open, find the product brochures.
2. According to the instructions in the packing list on the items and the number of checks to check the type of machine accessories, and the number is correct.
3. According to the machine’s appearance picture, the machine is installed, and check the machine whether there are other problems, if any questions, please consult the dealer or service solution.

Move and place the machine’s attention

1. After the installation of the machine if no other problems, we must choose the right place to put it.
2. The length of the input power cord is determined according to the operating distance, and the power cord must not be less than 4 mm copper cable.
3. When placed in the machine, can not be tilted around, to be stable on the ground to avoid damage to the machine.
4. When moving the machine, use a pulley with a pulley or move it with the wheels of the machine. Do not drag the machine or pull the cable to move the machine. Otherwise, it will damage the machine or break the cable and cause inconvenience to the later work.

Enter the connection method of the power supply

Step one, the input voltage of_ V can be used with the machine comes with the power cord and 16A plug connection

Operating

0peration panel guidelines

1. Welding mode
2. Mode confirmation
3. Adjust
4. Power mode
5. Switch
6. Ground line
7. Torch line

Welding torch and connector

Application of single-sided spot welding gun

Method of operation

Note:

1. Before doing this, please test on other workpieces to avoid damage to the surface of the vehide due to excessive current or too long damage.
2. According to the body plate thidkness, select the appropriate gear, the machine will automatically match the welding time with the current.
3. After doing this, you can continue with other functional operations. If you do not continue to work, tum off the power and cut off the main switch, finishing the various accessories for the next use.

Note:

1. before doing this operation, please try the other parts to avoid the current being too large or too long to damage the body to repair the surface.
2. according to the body plate thickness, select the appropriate gear, and the machine will automatically match the welding time with the current.
3. triangular pieces of welding before the replacement of the meson repair, it can be directly after the welding part of the depression is pulled out.
4. after doing this operation, you can continue to other functional operations, if you do not continue to work, please turn off the power and cut off the main switch, and the various accessories for the next use.

Note:

1. before doing this operation, please try the other parts in order to avoid the current is too large or too long to damage the body to repair the surface.
2. according to the body plate thickness, select the appropriate gear, the machine will automatically match the welding time with the current.
3. after doing this operation, you can continue to other functional operation, if you do not continue to work, please turn off the power and cut off the main switch, the various accessories finishing for the next use.

Note:

1. before doing this operation, please first test on the other parts, to avoid the current being too large or too long damage to repair the Body surface.
2. according to the body plate thickness, select the appropriate gear, and the machine will automatically match the welding time with the current.
3. after doing this operation, you can continue to other functional operations, if you do not continue to work, turn off the power and cut off the main switch, There Will be a variety of accessories finishing, for the next use.

The Use of Sucker

Use of manual sucker:

1. the sucker and pull hammer connected
2. the sucker forced to no dead angle of the depression
3. with the hammer in the opposite direction to pull out the depression

Maintenance and Repair

Failure and Exclusion

Malfunction

|

Cause

|

Treatment measures

---|---|---

No power supply

|

(1) The power supply is not connect e d correctly

(2) The power switch is not turned on

|

(1) Check whether t h e wi r ing is installed according to t h e requi r ements of the ma c hine

(2) T urn on the machine power switc h

Automatic welding does not work

|

(1) No good ground

(2) Pull the plug of the machine control line

|

(1)       ) Check and then take a good ride

(2)      Open the machine and re-plug the

connector

Welding

is not strong

|

Select the correct mode

|

(1) Increase or decrease the stalls

Break the body

|

Select the correct mode

|

(1) Increase or decrease the stalls

Carbon rods are unstable

|

(1) The carbon rod before work did not polish,

wo rk p i eces n o t po li s h ed c l ea nl y

(2) Select the carbon rod mode 6

|

(1) Work before grinding about, so that there is

no iron I mpurit i es

(2) Increase or decrease the stalls

The work machine stop not working

|

The temperature is too high

|

The temperature down will automatically work

Packing List

FAQs

Where can I find the user manual for the VEVOR G90E 110V Spot Welding Machine?

You can usually find the user manual for the VEVOR G90E Spot Welding Machine included in the product packaging. If it's not included, you can contact VEVOR customer support or visit their official website to obtain a digital copy.

What is the welding capacity of the VEVOR G90E spot welding machine?

The welding capacity of the VEVOR G90E machine can vary depending on the specific model and configuration. Check the product specifications or user manual for details on the maximum welding capacity.

Can this spot welding machine be used for both DIY projects and industrial applications?

Yes, the VEVOR G90E spot welding machine is versatile and can be used for a range of applications, from DIY projects to light industrial tasks. The specific suitability may depend on the model and accessories used.

What types of materials can I weld with the VEVOR G90E welding machine?

The VEVOR G90E is typically designed for welding various materials, including mild steel, stainless steel, and other conductive metals. Refer to the user manual for recommended materials and settings.

Is it easy to adjust the welding parameters on the machine?

Yes, the VEVOR G90E spot welding machine typically features user-friendly controls for adjusting welding parameters such as current and time. The user manual guides how to make these adjustments.

What safety features are included with the VEVOR G90E spot welding machine?

The VEVOR G90E machine may include safety features like overheat protection and emergency stop functions to ensure safe operation. Check the product specifications or user manual for details on safety measures.

What power source is required for the VEVOR G90E spot welding machine?

The VEVOR G90E machine typically operates on a 110V power source, which is standard for household electrical outlets in the United States. Make sure to use a suitable power supply.

Can I use this welding machine for continuous production or should I allow it to cool down periodically?

The duty cycle of the VEVOR G90E spot welding machine may vary depending on the model. It's advisable to follow the recommended duty cycle mentioned in the user manual to prevent overheating and ensure optimal performance.

What maintenance is required for the VEVOR G90E spot welding machine?

Regular maintenance includes keeping the machine clean, checking the electrodes for wear, and ensuring all connections are secure. The user manual should provide detailed maintenance guidelines.

Is there a warranty for the VEVOR G90E welding machine, and how can I obtain support?

VEVOR typically offers warranties for their products. If you encounter any issues or need support, you can contact VEVOR customer support for assistance and warranty information.

What accessories are included with the VEVOR G90E spot welding machine?

The included accessories can vary by model and package. Common accessories may include welding electrodes, a foot pedal, and other components. Check the product description or user manual for details.

Can I use the VEVOR G90E welding machine for battery tab welding or other specific applications?

Yes, the VEVOR G90E spot welding machine is suitable for battery tab welding and other applications. Consult the user manual for guidance on setting up the machine for specialized tasks.

Video- VEVOR Product Series

Download this PDF Link:VEVOR G90E 110V Spot Welding Machine User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>