EZCOO EZ-SP14HA21 1×4 HDMI 2.1 Splitter Scaler User Manual
- June 14, 2024
- ezcoo
Table of Contents
EZCOO EZ-SP14HA21 1×4 HDMI 2.1 Splitter Scaler
OVERVIEW
- EZ-SP14HA21 is a 1×4 splitter for HDMI with Ultra HD 8K@60Hz, 4K@120Hz support. This splitter reliably distributes one HDMI source signal to four HDMI outputs. Especially when you have one 4K TV and one 1080P TV, It supports 4K and 1080P outputsimultaneously
- It supports HDMI 2.1 specification features including data rates up to 8K@60Hz,4K@120Hz, VRR,ALLM,Dolby vision, HDR and HDCP2.3, Deep Color, 3D, Lip Sync, and HD lossless Audio/Videoformats
- It is ideal choice for applications which require the distribution of an HDMI source signal to multiple outputs.
FEATURES
- Distributes one HDMI source signal to four HDMI displays. It supports 4K and 1080P output simultaneously
- Support HDMI 2.1 8K@60Hz, 4K@120Hz,Dolby vision and HDCP 2.3
- Support VRR, ALLM
- Support EDID manager
- Support 3D, Support deep color 30bit, 36bit.
- Support Blue-Ray 24/50/60fs/HD-DVDIxvYCC.
- Support Dolby Atmos Audio
- Support HDMI signal re-timing, never lose quality
- Plug and Play; No driver required; Installs in minutes
PRODUCT DIAGRAM
Package Accessories
- HDMI Splitter x1
- Power adapter x1
- Reusable Cable Tie x2
- User Manual x1
INSTALLATION
- Connect HDMI Source devices to HDMI Splitter’s Input port with HDMI 2.1 cable(<3m).
- Connect each display device(Such as monitor or projector) to the HDMI Splitter’s Output port with HDMI 2.1 cable(<3m).
INSTRUCTION
EDID SETTING
SPECIFICATIONS
HDMI vertion
| ****
HDMI 2.1
| ****
HDCP version
| ****
HDCP 2.3
---|---|---|---
HDMI
resolution
| 4K’2K/10B0p/1080i/720p
1576p1576i/4B0p/4B0i
| .
Video format
| ****
24bit/30bit/36bit
Audio format
| ****
Dolby true HD/DTS-HD/DTS5.1/Dolby AC3/DSD
Input/Output TMDS signal
| ****
0.5-1.5Volts p-p(TTL)
| Max working current| 1A
Input/Output DOC signal
| 5Volts p-p (TTL)| Operating Humidity range| 5to 90%RH
(No Condensation)
Power adapter format
| Input AC 100V-240V/ 50HZ 60HZ·
Outp t: USB 5V/1A
| Operating Temperature range| ****
(-15 to +55’C)
Dimension (LxWxH)| ****
150’83.3’20 (mm)
| ****
Weight
| ****
90g
TROUBLE SHOOTING
- POWER: Make sure devices are powered on.
- INDICATOR: Check LED indicators of splitter are on
- DEVICES: Make sure picture can be shown normally when connecting HDMI source to display devices directly.
- CABLE: Plug in and out HDMI 2.1 cable or change another HDMI2.1 cable. HDMI 2.1 cable less than 3 meter is best.
- COMPATIBILITY: Please test other source and display devices to determine whether it is a compatibility issue.
NOTES
Please use this machine based on below instructions to keep longer lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant environment.
- All parts will be free from the strong shake, hit, fall.
- Touching the device with the wet hands is prohibited.
- Please turn power off when machine is not used for long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.
DISCLAIMERS
The information in this manual has been carefully checked and is believed to
be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any
infringement of patents or other rights of third parties which may result from
its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies
that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no
commitment to update or to keep current the information contained in this
document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to
this document and/or product at any time and without notice.
CONTACTS
When you need any technical assistance, please send e-mail to
[email protected]
Visit to learn more
https://www.easycoolav.com
EZCOO TECHNOLOGY INC
[email protected]
https://www.easycoolav.com