PYLE PLCMTRDVR47 Vehicle Back Up Camera And Monitor DVR Kit User Manual

: June 14, 2024
: Pyle

Table of Contents

INSTALLATION INSTRUCTION
ATTENTION:
APPLICATION
BUTTON FUNCTION
REMOTE CONTROL
INSTRUCTION MANUAL
CONNECTION
MONITOR STANDARD INSTALLATION
Monitor installation (Optional)
PRODUCT MAINTENANCE
ACCESSORY
INSTALLATION EXAMPLES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**PYLE PLCMTRDVR47 Vehicle Back Up Camera And Monitor DVR Kit User Manual

**

INSTALLATION INSTRUCTION

Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.

NOTICE

For your safety, please do not watch videos on the monitor when driving. Except professional repair-men, do not modify the machine. lf the machine doesn‘t work, please consult customer services or send the machine to local maintenance departments.

WARNING:

Please install this machine in the place where laws and regulations allows it, our company take no responsibility for illegal product installation.

ATTENTION:

The machine may appear darkscreen phenomenon when starting up in the cold days, after power on and machine’s temperature gradually rises up, the display screen would gradually return to normal.

APPLICATION

This product adopts digital TFT color LCD of high definition real-time monitoring, stored in SD card; built-in DVR recording function with one single image or quad split images; supports 1way AV recording; built-in speaker and with remote control. The installation is convenient and the connection is simple. With no radiation, low consumption, beautiful and vivid image, small size etc features, widely applied in universal car security and monitor.

BUTTON FUNCTION

Labelling Mark
MENU: Compound key in the settings menu, four split & DVR mode.
CH 1: Direct channel CH 1 mode in split mode. In four split state its the menu minus. Menu up in DVR state, its the last page in the DVR video playback state is used to select videos.
CH 2: Direct channel CH 2 mode in split mode. Menu plus in four split state. Drop down menu in DVR State. The next page in DVR video play back state, used to select videos.
POWER: Monitor standby/switch ON
CH3: It is the direct channel 3 mode in split mode, it is the down in the four split status menu, left in the DVR status menu, CH3 is the play button in DVR video.
CH4: It is the direct channel 4 mode in split mode, UP in the four split status menu, right in DVR status status menu, and in DVR videos CH4 indicates “pause”.
MODE: In four split screen, it is the cyclic switching of the mode 2 division,
- segmentation, -4 segmentation. In DVR state, MODE is used to switch playback/video mode.
Remote Control window.

**BUTTON FUNCTION

**

Labelling Mark
POWER: Compound key long press indicates that the monitor is standby /switched ON. Short press indicates four split/DVR screen switching
MODE: Compound key short press indicates the loop switch of the split mode 2 – split 3 – split 4/ln the DVR state. MODE can switch to playback /video mode. Long press represents the conversion of the four division and the DVR mode
CH1: It is the direct channel CH1 mode in split mode/In the four split state, it is menu minus/the menu up in the DVR state/ the last page in DVR video playback state, used to select videos.
CH2: The direct channel CH2 mode in split mode/It is menu plus in the four split state/It is the menu down in the DVR state/ It is the next page in the DVR video playback state, used to select videos.
Ch3: The direct channel 3 mode in split mode/down in the four split status menu/left in DVR status menu/in DVR video, CH3 is the play button
Ch4: Direct channel 4 mode in split mode/It is up in the four split status menu/It is right in the DVR status menul In DVR videos. CH4 indicates pauses
Remote Control Window

REMOTE CONTROL

POWER: Standby/boot button. you can achieve standby mode or boot mode
DVR/AV: Toggle the DVR mode and the four split mode
MODE1: In DVR mode. Used for loop switching of video/playback
SETUP: In DVR mode. you can open the DVR settings menu
UP: Up direction
MUTE: Mute switch. No power amplifer. no support
LEFT: Left direction

REC/ENTER: In DVR mode, video start (stop) / conrm function
RIGHT: Right direction
MENU: Screen display settings menu
DOWN: Down direction
MODE: Four split compound split mode switching. Cyclic switching of 2 segmentation, 3 segmentation, 4 segmentation
CH1 : In the four split mode, use to switch directly to single channel 1
VOL+: Volume increase. No power mode. No support
CH2: In the four split mode, use to switch directly to single channel 2
CH3: In the four split mode, use to switch directly to single channel 3
VOL-: Volume reduction. No power mode. No support
CH4: In the four split mode, use to switch directly to single channel 4

INSTRUCTION MANUAL

How to set DVR video time

In DVR mode, enter the DVR settings menu via remote control SETUP or panel MENU, and then click it again to enter the SETUP Options box as follows:
INSTRUCTION MANUAL

Press up and down to enter the INPUT item remote control. REC/ENTER to enter date setting. Remote control ‘REC/ENTER’ or panel. press CH3 to enter time setting. Change the time page up and down:

How to operate DVR video

In DVR mode, remote control MODE1 or long press the keypad MODE to switch to burn mode, while the lower left corner of the white time display as shown

And then remote control REC / ENTER or monitor panel long press CH3 for recording mode. The image began to burn, the upper left corner of the red dot will fash as shown:
DVR video

How to view DVR burn videos

In the DVR mode, remote control MODE1 or press the panel MODE to switch to view the recording mode, the upper left corner of the display has a black folder icon and the current video track display. You can press CH1/CH2 up and down button to select different video fle. In the lower left corner; OK, play, pause icon and time displays, and then remote control REC / ENTER or panel press CH3 to confirm the video playback:

CONNECTION

MONITOR STANDARD INSTALLATION

Remove the screw around then take out the monitor. Put U type bracket to the right place and adjust. Prepare 3 screws. (see below pictures)
Lock the bracket by screws. Put the monitor into the bracket. Adjust angle and locking it. (see below pictures)
Finish the installation. The adjustable angle is forwad 30° and backward 30°. User can adjust its preferred angle. (see below pic.)

Monitor installation (Optional)

Firstly fix the screws and fan-shaped bracket tight. (see below pictures)
Secondly put the metal buckle piece on the top of the fan-shaped bracket into the notch at the back of the monitor. (see below pictures)
Move the bracket to the proper location. (see below pictures)
Fix the big screws of the bracket until to keep the monitor tight (see below pictures)
To change the direction or angle of the monitor, firstly loosen the screws on the bottom of the bracket. Then move the monitor to the desired location then fix the screws on the bottom of the bracket again. (see below pictures)

PRODUCT MAINTENANCE

DO NOT install the products in a damp place
Do not squeeze or scratch the product with sharp objects.
Wipe the products with a soft cloth soaked with a small amount of mild detergent. When cleaning the TV, do not use polishing cloths, disinfectants or any kind of fuel or chemical cleaners such as alcohol and gasoline, etc.
Unplug or turn o the power if the unit is not in use.

Notice :

Please obey the local laws to install the product at a right position. Our company is not responsible for the law issue caused by the illegal installation.

ACCESSORY

Remote control 1 PCS
User manual*1PCS
Power cable 1 PCS (optional)
Sun shade 1 PCS
Bracket Accessories*1 PCS

INSTALLATION EXAMPLES

INSTALLATION

Monitor system used in truck, bus, express car, or special vehicle

PLCMTRDVR47

Vehicle Back-Up Camera & Monitor DVR Kit – 9’’ Display,
Video Recording, Quad-View Ability, Night Vision,
Waterproof Cams (For Truck, Van, Bus, Trailer)

Features: