MAXSISUN MF1000 Remote Control LED Grow Light User Manual

MAXSISUN MF1000 Remote Control LED Grow Light

SAFETY INFORMATION

1. Do NOT use a damaged power cord.
2. Do NOT look directly at the LED bulbs when the light is operating.
3. Do NOT use the light near flammable, explosive or reactive substances.
4. Do NOT attempt to open, rewire or reconfigure any components of the light system. It will void the warranty and could cause severe injury or death.
5. Hang light securely so that it cannot fall.
6. Only use the supplied power cord that comes with the light.
7. Indoor use only. The light is certified for use in damp and dry locations.
8. Always disconnect power from the light before moving or cleaning it.
9. Check and adhere to all local rules and regulations when installing.
10. The minimum required distance between lights is 4 inches (10cm), and between the light and combustible materials is 16 inches (40cm) such as walls, ceilings, movable partitions, and the like.
11. The maximum temperature of the installed environment will ensure the safe operation of the light. Mechanical ventilation or cooling system is required to maintain the temperature within the growing space below 104°F (or 40°C) when the light is operating.

BEFORE USE

1. Install batteries in the remote.
2. Plug the light into an outlet. Turn off its switch.

CONNECT REMOTE TO LIGHT(S)

1. Long-press [ID] and turn on the switch. The light will blinks if the connection succeeds.
2. Press [AL1-]. Select the brightness you want. Repeat for all lights.

GROUPING: SET DIFFERENT BRIGHTNESS FOR MULTIPLE LIGHTS

1. Connect one remote to all lights (ex. 10 lights). Turn off their switches.
2. Put 5 lights into group 1: Long-press [1] and turn on 5 lights’ switches. These lights will blink if the connection succeeds.
3. Put the rest of 5 lights into group 2: Long-press [2] and turn on their switches. These lights will blink if the connection succeeds.
4. Press [1]. Select the brightness for group 1.
5. Press [2]. Select the brightness for group 2.
6. Press [ALL]. Select the brightness for all lights.

CHANGE ONE LIGHT TO OTHER GROUP

1. Turn off its switch.
2. Long-press [5] and turn on its switch. The light will blinks if the connection succeeds.

CONNECT REMOTE TO LIGHT WHICH IS IN STANDBY MODE

1. Turn off the switch over 15 seconds.
2. Long-press [ID] and turn on the switch over 5 seconds. The connection will succeed.
3. Press [ON] to turn on the light.

MF1000 PPFD MAP – Tested in a 2×2 ft Grow Tent

MF1000 SPECTRUM

NOTE:

Extremely bright, do not stare at the operating lamp. For the flowering stage: use all channels with 100% brightness. This light includes IR (Infrared) LEDs which look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 600W.

MF2000 PPFD MAP – Tested in a 3×3 ft Grow Tent

MF2000 SPECTRUM

NOTE:
Extremely bright, do not stare at the operating lamp. For the flowering stage: use all channels with 100% brightness. This light includes IR (Infrared) LEDs that look dim, they are not faulty LEDs. For safety, total true wattage of extra connected lights MUST less than 600W.

MOUNTING INSTRUCTIONS

1. Attach the clips on the ends of the hanging wires to each of the hanging holes on the light.
2. Attach two adjustable ropes, via the carabiners, to each of the hanging wires’ carabiners.
3. 3. Attach opposite ends of adjustable ropes’ hangers to a safety mounting position.
4. 4. Adjust the light to your desired location by using the adjustable ropes.

USING INSTRUCTIONS

This section will help you in the process of evaluating “how high” and “how many hours” will be best suited for each stage of plant growth. Hang the light at a minimum of 12 inches from light and plant canopy. Less than 12 inches of distance may burn plants. Start high, adjust as plants acclimate.

• Seedlings – You will need to hang the light high due to the delicate nature of seedlings. We recommend a break-in period of about a week while a seed has broken the surface. The first set of real leaves should be present while the seedling has been above ground for about a week.
• Clones – Clones are a little bit hardier than fresh seedlings, but still, need to be given gentle light as they are entirely rootless when first cut, and need to conserve energy and moisture to transition into a rooting stage.
• Vegetative – The deeper red spectrum is utilized less by the plant than when it is in flower. It uses high levels of white light that are essential for creating lush, thick plants that have tight internodal spacing and minimal stretching.
• Flowering – The plant has much work to do and is performing many complex biological processes in producing flowers and fruits. Because of this, the plant now requires large amounts of light.
• Late Flower – Most rapid development has stopped, and the plant is gearing up for the scene in which the large flowers and fruits will mature or ripen.

WARRANTY

What Is Covered
MAXSISUN lights are warranted against defects in materials and craft for three (3) years from the original date of purchase. During the warranty period, MAXSISUN will either repair or replace any covered defective product. Within the first 180 days, MAXSISUN will bear all costs associated with the repair, replacement, and return of the faulty product. After 180 days, the customer will assume responsibility for shipping the defective product back to MAXSISUN for the remainder of the warranty period. MAXSISUN will, in turn, assume liability for up to $50.00 per light of the shipping fees associated with returning the repaired or replaced product to the purchaser. Return shipping fees above $50.00 will be the responsibility of the purchaser.

What Is Not Covered

1. This warranty does not cover any damage, deterioration, malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, neglect, exposure to excess moisture, fire, lightning, power surges, or other acts of nature.
2. This warranty does not cover any damage, deterioration, malfunction resulting from the installation, removal, unauthorized tampering, repairs attempted by anyone unauthorized by MAXSISUN to make such repairs. Any other cause which does not relate directly to a defect in materials and quality of this product is not covered.

90 Days Money Back Guarantee
MAXSISUN is so confident in the performance of our cutting edge lights that we offer a full 90 days money-back guarantee. If you are unsatisfied with your purchase for any reason, we will gladly accept a return and provide a refund less shipping fees. Eligibility requirements are as follows:

• Valid for the first purchase of MAXSISUN products only.
• Valid for the original purchaser only.
• Valid for up to two lights.
• 90 days begins from the date of purchase.
• The returned products must be in “like new” condition and in original packaging.
• Offer valid for returns only. Exchanges are subject to a 30 days return policy and restocking fee.
• Offer valid for direct purchasers only. Customers purchasing via authorized resellers are subject to the policies of the reseller.

Returns
Returns not qualifying for the 90 Days Money Back Guarantee can still be returned within 30 days from the date of purchase. Pending the below conditions are met, the purchaser will receive a refund:

• 30 days begins from date of purchase.
• Valid for the original purchaser only.
• The product must be in “like new” condition and in original packaging.

How To Obtain Warranty Service
To enforce the rights under this warranty, the purchaser must notify MAXSISUN of a warranty claim by sending an email to [email protected]. At this time, the purchaser will be called upon to provide proof of purchase. The MAXSISUN representative will either attempt to assist in troubleshooting, request photos showing the defect, and provide more detailed return instructions. Upon receipt and review of the defective product, MAXSISUN will repair or replace, and return it within five (5) business days. To obtain refund service, upon receipt and review of the returned product, MAXSISUN will issue return credit within three (3) business days.

Cleaning:
Disconnect the power cord. Use a clean, soft, lint-free cloth to wipe the light. Please be aware of getting moisture or damage in any openings.
Legal Disclaimer:
MAXSISUN products are to be used for lawful purposes only. It is the responsibility of you as the purchaser to know and abide by all laws on the use of MAXSISUN products. MAXSISUN will NOT be held liable for any unlawful state or federal activity arising out of the use of our products. By purchasing a MAXSISUN product, you agree to these terms and conditions, confirming that you, as the purchaser, are attesting to the lawful use of our product and are thereby solely responsible for acting in conformance with all applicable regulations.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>