AGM JSK-P22 Dual Mode Symphony Wall Light User Manual

Manual Of JSK-P22
(Dual-mode Symphony Wall Light) Please read the manual
thoroughly before using it

Instructions

1. Thank you for choosing JSK-P22 product.
2. Please read this manual carefully to ensure that you fully understand the manual to avoid unnecessary damage before installing and using it.

Precautions

To keep the product in good condition and safety use,please follow the tips in this manual:

1. Try to avoid minefields, strong magnetic fields, humid and high-voltage areas during installation.
2. Ensure that the wiring is correct and firm to avoid accidents such as short circuit damage to components and burnout of the controller.
3. Please check whether the input power supply of the controller (must match the power supply voltage of the controller) meets the product requirements. If any problem, please do not repair it by yourself. If in doubt, please contact the supplier.

Product Introduction

he dual-mode Symphony splicing light has controller PCBA with an external microphone and 7 physical buttons. Through physical buttons, mobile APP Perform lighting brightness, color, and various dynamic lighting change effects and light rhythm effects switching operations on the product

Specification

APP Function

1. Support mobile phone to install smart life APP for control
2. Users can customize the product name after entering the APP operation page
3. In the effect page, there are a variety of music and scene modes, the user can set the speed/brightness/color for the various effect modes
4. Support Alexa, Google Assistant, Tmall Genie, Baidu
5. The APP supports ios10.0 or higher,Android 4.4 or higher
6. Complete the download and installation after searching for “Smart Life” in the IOS App Store/Android google play App Store

You can also scan the QR code to download and install:
Please scan the following QR code to install:

https://smartapp.tuya.com/smartlife

Matching Network

When the product is correctly connected to the power, and the light flashes, indicates the product has entered the matching network mode.
(If the product is not in matching network mode, please press and hold the physical button to force it match network.)
Matching Network:

1. Turn on the Bluetooth and WiFi of the mobile phone, and log in to the APP to automatically match the Bluetooth network:
   After entering the home page of the APP, a reminder for adding devices within the Bluetooth search range of the mobile phone will pop up (Figure 1). Select the Wi-Fi and enter the password (Figure 2), and follow the interface prompts to complete the device addition (Figure 3/4).If no pop-up reminder after entering the APP homepage, by the “add” in the middle of the screen or”+”in the upper right corner of the screen, enter the add interface.
   At this time, the Bluetooth continues to work, and the search status is displayed at the top of the screen. After searching for the product to be added, click the product icon (Figure 5)
   Follow the interface reminder to complete the addition.

2. Turn on the WiFi of your mobile phone and connect to the network manually:
   Select the light strip (Bluetooth+Wi-Fi) in the lighting category (Figure 1), select Next (Figure 2) to enter the 2.4G network selection interface (Figure

3. At this time, the light status selection (fast flashing/slow flashing) interface (Figure 4)

When the light flashes quickly, select the Wi-Fi used by the user and enter the password (Figure 1)
and follow the interface operation prompts to complete the device addition (Figure 2/3)When the light flashes slowly, select the Wi-Fi used by the user and enter the password (Figure 1)to enter the APP hotspot connection network jump interface (Figure 2)
Click to jump to the mobile network settings (Picture 3), select the SmartLife-Xxxx hotspot and return to the Smart Life APP,Wait for the APP to automatically complete the matching.

APP Control Interface

●5 functional sections in APP control interface:

1. The switch only controls on and off of the light,and does not influence the network connection between the mobile phone and the product

2. Static light color setting interface: Light monochrome settings:
   The color selected under this page will become the color of all lamp beads
   Set the color in segments:
   After selecting the color on this page, click the lamp segment that needs to be set, to set or change the color of the lamp beads.
   Erase color in segments:
   In this page, click the lamp segment to be selected, so that the lamp beads in this area do not light up
   This function is optional when the lamp has two or more colors.
   Make the adjacent color lamp beads between different color lamp beads produce a layered effect

3. Scene Mode
   Scene mode, lighting effects are divided into five categories: DIY, scenery, life, festival, mood(Figure 1) Among them: scenery, life, festival, mood, 44 default scenes in total, which can’t be changed. DIY can enter the add interface through the top of the page to make personalized settings and save (Figure 2).

4. Music rhythm
   It’s divided into local mode (device radio Figure 1) and APP mode (mobile phone radio Figure2). In the local mode, only the sensitivity of the microphone is adjustable in the current mode. App mode is default and cannot be changed.

5. Other settings
   You can set the timing or countdown for the time and cycle of turning on/off the light;

Other Information

Enter from Edit in the upper right corner of the APP product control interface

Can be customized to change the device name

1. Device information:
   Can query product IP address, Mac address, device time zone, signal strength, virtual ID

2. Shared devices
   Configurable to share device control with others

3. Add to Home Screen
   Add a product to your phone’s home screen and set up a shortcut icon

4. Equipment upgrade
   When the product updates the software version, the software is upgraded through the mobile phone

5. Remove the device
   When the device is unbound and the cache is cleared, the product restores the initial value, At the same time, the device returns to the network configuration state, and the light flashes rapidly at this time.

Product Appearance And Key Function

(Importer)
Firma: LI-MI INTERNATIONAL GMBH
Kontakt：Herr. Li
Email: vertretung@li-mi-international.de
Adresse: Melitta-Schiller-Strasse 30, 12526 Berlin, Germany
(Importer)
Company: OBERO INTERNATIONAL LTD
Contact: Mr. Tian
Email: Contact@iobero.com
Address: Unit 1,Kiwi Park Commerce Way, Trafford Park,
Manchester, England, M17 1HW
Manufacturer: SHENZHEN RBU TECHNOLOGY GROUP CO., LTD
Address: 9 Tengfei Road, Longcheng Sub-District, Longgang District,
Shenzhen, China
Distributor: FAIRMART INNOVATION LIMITED
Address: 158 Stanley Grove, Manchester M18 7DH, United Kingdom
Distributor: AGM USA, LLC
Address: 1521 E Francis St, unit a Ontario, CA 91767, United StatesMADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>