ErGear EGESD18B L Shaped Height Adjustable Electric Standing Desk Instruction Manual

: June 14, 2024
: ERGEAR

Table of Contents

EGESD18B L Shaped Height Adjustable Electric Standing Desk
Product Information
Specifications:
Tools Needed (Not Included):

EGESD18B L Shaped Height Adjustable Electric Standing Desk

Product Information

The Electric Standing Desk is a versatile and ergonomic desk
designed to provide a comfortable and adjustable working
experience. It allows users to easily switch between sitting and
standing positions, promoting better posture and reducing the
negative effects of prolonged sitting.

Specifications:

Desktop Dimensions: 57.1″ (145cm)
Max. Speed: 20mm/s
Operating Noise:

Tools Needed (Not Included):

OR
Drill
Phillips Screwdriver

Product Usage Instructions

Start by assembling the desk according to the provided assembly
instructions. Ensure that all screws and parts are tightly
secured.
Place the Electric Standing Desk in your desired location,
ensuring that there is enough space for the desk to move up and
down without obstruction.
Connect the power cord to a suitable power outlet.
To adjust the desk height, use the control panel located on the
front of the desk. Press the up or down arrow buttons to raise or
lower the desk respectively. The desk will stop automatically when
reaching the maximum or minimum height.
For optimal comfort, adjust the desk height so that your elbows
are at a 90-degree angle when typing and your eyes are level with
the top of the monitor.
To switch between sitting and standing positions, simply press
the desired height adjustment button on the control panel. The desk
will smoothly transition to the selected height.
When not in use, it is recommended to lower the desk to its
lowest position and unplug the power cord for safety.
Regularly clean the desk with a damp cloth and mild detergent
to maintain its appearance and functionality.

For any further assistance or troubleshooting, please refer to
the complete instruction manual or contact our customer
support.

Electric Standing Desk
Instruction Manual
Rev00(A) EGESD18B / EGESD18V / EGESD18N
Technical Support: (US/CA) 1-800-651-9525 MonFri, 8am8pm (CST) (UK) 44-808-196-3875 MonFri, 2pm10pm (UTC) Other Info: support@ergear.com Website: https://ergear.com

Tools Needed (Not lncluded)

OR

Drill

Phillips Screwdriver

Specifications

Desktop Dimensions 57.1″ (145cm)
Height Adjustment Range 28.3″46.5″ (72118cm)

Power Input 100V240V

Max. Speed 20mm/s

Operating Noise <55dB

RATED
Max. Load 176 lbs / 80kg

Step 1
Supplied Parts and Hardware

01 x 1
Short Crossbar
04 x 1

02 x 1
Long Crossbar
05 x 1

03 x 1
Left Desk Leg
06 x 1

Right Desk Leg
07 x 1

Short Side Plate
08 x 1

Long Side Plate
09 x 1

Short Leg Base

Long Leg Base

Crossbar Connector
01

A x8

B x 12

C1 x 1

Bolt M6 × 35mm
C2 x 1

Bolt M6 × 11mm
D x 16

Large Allen Wrench 3/16″ (5mm)
10 x 1

Step 2
Supplied Parts and Hardware

Small Allen Wrench 5/64″ (2mm)

Rubber Pad

11 x 1

12 x 1

Transmission Rod
E x2

Left Desktop Panel
F x8

Right Desktop Panel Desktop Panel Connector
G x3

Step 3
Supplied Parts and Hardware
Step 4
Supplied Parts and Hardware

Screw M5 × 16mm
13 x 1
Controller
15 x 2
Cable Clip

Wood Dowel Pin
14 x 2
Storage Hook
16 x 1

F x 22
Screw M5 × 16mm

AC Adapter
02

Step 1 Assembling the Frame
Connect the crossbars together using the crossbar connector.
C1 09
B 02
09

01

Connect the desk legs.
C1 B

02
01 03

04
03

Attach the leg bases.

C1
Short Side A
08

08
Long Side 04

04

Attach the side plates.
05

05

03

C1

B

07 03
06 04
04

Loosen the coupling nut.

Coupling nut 10

Fig 1 b

a
10 Turn clockwise

Left Leg

Fig 2 b

a
10 Turn anti-clockwise

Left Leg

10 03
Left Leg

Before attaching the transmission rod, measure the heights of the two desk legs to see if they are set at the same level. If not, insert the transmission rod into the hole in the left leg. Turn the rod to adjust the left leg so it’s level with the right leg. Turn the rod clockwise to lower the left leg or anti-clockwise to raise it.
05

10 04
Right Leg
10
NOTE: Make sure the set screw faces out.
Ensure the transmission rod is properly inserted into the hole in the left leg. Smoothly connect the other end of the rod to the end of the motor drive shaft on the right leg.
10
Right Leg
C2
Secure the transmission rod to the motor drive shaft by turning the set screw clockwise.
06

D
Tighten the coupling nut to fine-tune transmission rod fit.
07

Step 2 Assembling the Desktop
Assemble the desktop.
11 G
12 11
12

Secure the desktop panels with the connectors.

OR
F 11
12
E
12

OR

Phillips

Drill

Screwdriver

(not included)

You can use a drill (with suitable torque and speed) or a Phillips screwdriver.

11

08

Step 3 Attaching the Desktop
Attach the desktop to the frame.

OR F 05

OR

Phillips

Drill

Screwdriver

(not included)

You can use a drill (with suitable torque and speed) or a Phillips screwdriver.

09

Attach the controller and hooks to the desktop.

OR

Phillips

Drill

Screwdriver

(not included)

You can use a drill (with suitable torque and speed) or a Phillips screwdriver.

OR
F 14

OR
F 13

10

Step 4 Connecting the Cables
13 13
16
16
15
11

Using the Controller
Save Current Height Setting
Short-press the button, and the display will flash. Press the , , or button to save the current height setting to that button.
Select Height Setting 1
Press the button, and the desk will move to the height that was previously set for that button.
Select Height Setting 2
Press the button, and the desk will move to the height that was previously set for that button.
Select Height Setting 3
Press the button, and the desk will move to the height that was previously set for that button.
Raise the Desk
Press the button to raise the desk continuously until it reaches the highest position of 46.5″ (118cm) or the button is released.
Lower the Desk
Press the button to lower the desk continuously until it reaches the lowest position of 28.3″ (72cm) or the button is released.
12

Settings

Change Display Height Units

Press and hold the button until a flashing S-‘ is displayed. Press again, and Un’ is displayed. Press to select it, press or to switch between IN’ (imperial) andSI’ (metric), and press to save your choice.

Change Collision Detection Sensitivity

Long press the button, S- shows and flashes. Press again and the display shows Un. Press or to switch to CF. Press to select. Press or to switch between OFF, Low (L), Normal (n) or Heavy (H) collision force detection. Press to save your choice.

Reset

Press and hold the button for 5 seconds, and the screen will show `RES.’ Continue holding until the desk goes down to its lowest level and comes back up slightly.

Protection Mode Error Codes

Overheating Protection: When the motor has been working

Hot

continuously for 2 minutes, it will stop operating to prevent

damage from overheating. Wait for at least 18 minutes

before making any further height adjustment.

Sensor Malfunction Warning: Motor safety sensor can’t be

E10

detected. Power off, check the connection between the

motor and controller, and power back on again.

Overloading Warning: Max load exceeded. If raising the

E20

desk, take the things off the desk and try again. If lowering

the desk, power off, take the things off the desk, power

back on, and try again.

Operation Status Warning: The desk stops moving if

E02

vibration, impact, or incline are detected. If this detection

is incorrect, follow the reset instructions before continuing

use.

13

Overvoltage Protection: Input voltage too high. If the correct

E32

AC adapter is being used, power off the desk, check the

connection between power and the controller, and power

on again.

Undervoltage Protection: Input voltage too low. If the correct

E31

AC adapter is being used, power off the desk, check the

connection between power and the controller, and power

on again.

Unequal Leg Height Warning: Power off the desk and

E60

check whether the left and right legs are at the same

height. Adjust if necessary by following the instructions.

Power on again.

Cable Disconnection Warning: Check motor and controller

cable connections. Normal operation should return once

all connectors are properly connected.

14

Thank you for choosing this product. We strive to provide you with the best quality products and service in the industry. Should you have any issues, please don’t hesitate to contact us.

Technical Support (US/CA) 1-800-651-9525 (UK) 44-808-196-3875

MonFri, 8am8pm (CST) MonFri, 2pm10pm (UTC)

Other Info support@ergear.com

Website https://ergear.com

860-00890-00 Rev00