Kwikset Casey Interior Privacy Door Handle with Lock Instruction Manual

June 14, 2024
Kwikset

**Kwikset Casey Interior Privacy Door Handle with Lock Instruction Manual

**

TOOLS REQUIRED

Required tools
| Parts in the box
---|---
****| Latch
Not required for all applications| Screws
| Passage Levers | Optional Square Rose

Additional tools (if needed)  
wood block| Emergency Un lock tool (privacy locks only)
| Strike
| Privacy Levers
Required tools| Optional Square Rose

Allen wrench

Prepare door and check dimensions

If drilling a new door, use the supplied template and the complete door drilling instructions available at kwikset.com/doorprepe
Dimension

Passage levers only: Call Kwikset to order a service kit for 2-1/4″ (57 mm) thick doors

Adjust the backset of the latch (if needed)

  • A ) Hold the latch in front of the door hole, with the latch face flush against the door edge.
    door hole

  • B ) If the latch holes are centered in the door hole, no adjustment is required. Proceed to step 3. If the latch holes are NOT centered, adjust latch. See “Latch Adjustment” (step 2C).
    centered

  • C )  Latch Adjustment (only if needed)

Move the pin to extend the latch

Install latch

  • Door edge chiseled
    Installation

  • Door edge NOT
    Installation

INSTALLATION

Installation
Installation
Installation
Installation
Installation
Drilling Template

Edge of the door

Template is only needed if a new hole must be drilled in the door.

Face of the door
Face of the door

Remove interior lever

Loosen the pre-installed set screw to remove lever. Do not remove set screw.
Remove interior lever

Install levers

IMPORTANT: installing a passage lock on an entry door, make sure the lever with the screw holes s on the interior side of the door.

Install interior lever base

Installation
Installation

Push upon lever base while door to see where screws insert. tightening screws to keep latch horizontal and centered.


Install interior ever and tighten pre-installed set screw.

Find your lever style in the chart and determine if your levers are oriented correctly. I your lever is notincluded in this chart, please skip this step.

correct incorrect

If oriented incorrectly, remove both levers and install them on opposite sides of the door.
Opposite sides the door

Install strike on door frame

Installation

Closedoorand estiatch operation. Iflatch s Ioose in the strike, adjust strike tab so it grips. e} the latch bolt better when the door Is closed.
Installation

Privacy locks only

Save the bedroom/bathroom emergency unlock tool () for future use.
Installation

Register your product at www.kwikset.com/productregistration Rate your product at www.kwikset.com/reviews

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals