BARSKA AX-50 Hard Case Combination Lock User Manual

AX-50 Hard Case Combination Lock

Initial Set-Up

see image A

1. Open Case: Slide button to the right to release the lock
2. Remove red security tab by sliding it out of place
3. Keep case OPEN during Setting Combination process

Setting Combination

see image B

1. Slide and hold button to the left, do not release

2. Set desired numbers for your combination and
   release button

3. Do NOT close case, until you’ve tested your combination

NOTE:
– Make sure to remember or write the combination numbers and place it in a secure place, NOT inside case
– Once the combination is set and case is locked; the case can not be opened without the correct combination

Testing the Combination

1. With case OPEN, change combination numbers to random numbers
2. Slide button to the right, the button will NOT move
3. Enter your combination; slide button to the right, latch will move
4. The combination has been successfully set
5. Close and lock case

Reset Combination Lock

1. Enter your previous combination
2. Open case and follow Setting Combination procedures

©2013 BARSKA®
www.barska.com | www.loadedgear.com

References

• Barska - Your Ultimate Source for Premium Safes and Outdoor Gear
• Barska Riflescopes, Biometric Gun Safes, Binoculars & Laser Sights - Barska.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>