MOUNTUP MU0009 TV Wall Mounts TV Bracket Instruction Manual

: June 14, 2024
: MOUNTUP

Table of Contents

Safety Caution
Must Check Before Getting Started
Product Dimensions
Supplied Parts and Hardware
Extra Tools You Need (Not Supplied)
Attach Brackets to TV
Attach Wall Plate to Wall
Hang and Secure TV to Wall Plate
Adjustments (If necessary)
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOUNTUP MU0009 TV Wall Mounts TV Bracket

Safety Caution

Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

This product is designed for use in wood stud or solid concrete wall.
DO NOT install into drywall alone.
The wall must be capable of supporting five times the weight of the TV and mount combined.
Incorrect installation may result in product damage/property damage or body injury. We shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

WARNING : This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!

Must Check Before Getting Started

Minimum VESA Pattern (W × H):
75mm × 75mm / 3 in × 3 in
Maximum VESA Pattern (W × H):
400mm × 400mm / 16 in × 16 in

WARNING

DO NOT exceed the maximum weight indicated.
This mounting system is intended for use only within the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in failure of the mount and its accessories causing possible damage or injury.

Verify Your Wall Construction

CAUTION :
Avoid potential personal injuries and property damage!
Drywall covering the wall must not exceed 5/8 in. (16 mm).
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm).

CAUTION :
Avoid potential personal injuries and property damage!
Mount the wall plate assembly directly onto the concrete surface (no surface covering).

CAUTION DO NOT install into drywall alone.

Product Dimensions

Supplied Parts and Hardware

Arm and Wall Plate
VESA Plate
Extenders
Nuts
Bolts
Allen key

Wall / Product

Lag Bolt ST8x65mm A x3
Washer Ф8mm B x3
Open-end Wrench C x1

TV

Philips Screws
M4 x 12mm
M4 x 30mm
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M8 x 25mm
M8 x 45mm
Spacers
H10mm
Washers
Ф6mm
M4-5-6
Spacers
H5mm
Bubble Level
T1 ×1
Velcro Cable Ties
T2 ×3

NOTE : Not all parts and hardware included will be used.

Extra Tools You Need (Not Supplied)

For Wood Studs

Stud Finder
Awl
Wood Drill Bit
Ф7/32″ (Ф5.5mm)

For Concrete Wall

Masonry Drill Bit
Ф3/8″ (Ф10mm)
Hammer
Band Tape
Pencil
Electro drill
Socket Wrench
1/2″ (13mm)
Screwdriver

Attach Brackets to TV

Select VESA Plate Configuration

Measure the width and the height of the square or rectangle formed from the VESA holes pattern. Select the configuration to use based on the measurement from TV.

VESA Pattern
(W x H)| Configuration| VESA Pattern
(W x H)| Configuration
---|---|---|---
75mm x 75mm| A| 300mm x 200mm| C
100mm x 100mm| A| 300mm x 300mm| D
200mm x 200mm| A| 400mm x 400mm| D
200mm x 300mm| B| 400mm x 300mm| E

Assemble VESA Plate and Extenders (When VESA > 200mm)

If your TV hole pattern is greater than 200×200mm, attach extenders (03) to VESA plate (02) using Nut (4A) and Bolt (4B).

Select Correct TV Screw Diameter

Select Correct TV Screw Length

Which Situation Needs Spacers?
If the screw is too long or the surface is uneven, please choose the appropriate screws and spacers for your TV.

For more spacing between bracket and TV
For protruded back TV
For counterbore of TV
To avoid the blocked input

| Do not tighten the screws excessively or tighten them by using the Electro drill, or your TV might be damaged.
---|---

Attach Wall Plate to Wall

OPTION A : Wood Stud Installation

Locate your studs. Verify and mark the center of the stud by finding the stud edges using awl and stud finder.
Line up the holes with your stud center line. Level the wall plate and mark the pilot hole locations.

Drill pilot holes using a Ф7/32 in (Ф5.5mm) diameter drill bit.
IMPORTANT :
Do not drill holes into where water pipes or electrical wires are located. Be sure to drill into the center of the stud.

Install wall plate using lag bolts and Washers with Socket Wrench, NO Electro drill. No anchors when installed onto the wood studs.

CAUTION:

To avoid potential personal injury or property damage:
All 3 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, the Arrow Must Keep UP at this step!!

OPTION B : Solid Concrete Wall Installation

Level the wall plate and mark the pilot hole locations.

Drill pilot holes using a Ф3/8 in (Ф10mm) diameter drill bit.
IMPORTANT :
Do not drill holes into where water pipes or electrical wires are located, or mortar between blocks.

Use the hammer to knock anchors (not included) into the concrete wall. Be sure the anchors are seated flush with the concrete surface.

Install wall plate using lag bolts and Washers , and anchors (not included) with Socket Wrench, NO Electro drill.

CAUTION:

To avoid potential personal injury or property damage:
All 3 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step. To prevent the TV falling down, the Arrow Must Keep UP at this step!!