YI Waterproof Outdoor Wifi Camera User Manual
- June 14, 2024
- YI
Table of Contents
Thank you for choosing the YI Outdoor Camera 1080p
What’s in the Box
Getting to Know Your Camera
Pairing Your Camera
a. Power on the Camera
Piace the camera close to the router, and make sure Wi-Fi access is available,
then connect the cable to the Micro USB port on the back of the camera to
power the outlet as shown.
The camera indicator will flash yellow and you will hear the introductory
messages *
Welcome to YI Home Camera”, followed by “Walling to connect”.
b. Connecting to the YI Home
App
Step 1
Download the YI Home App and register a YI Home account.
Step 2
- Ensure that your cell phone is connected to your tocal 2.4GHz Wi-Fi network.
- Enable the “Location” function on your phone.
- Authorize the “Location” function of the YI Home app.
http://xiaoyi.com/en/home/app/us.html
Step 3
Log in to your YI Home account and tap the “+” symbol in the top-right, select
the Y1 Outdoor Security Camera” and then tap the “I heard ‘Waiting to
connect™ button.
Step 4
Enter your Wi-Fi network password and tap the “Please choose Wi-Fi” button. A
QR code will appear on your phone’s screen. Point the QR cade towards the
camera lens until you hear the following messages “QR code scan is successful,
connecting to W-Fi and “Wi-Fi is connected”.
Step 5
Tap the “Next” button. You will hear the message “Pairing is successful, you
can start using your camera now” both from the camera and from the app. Assign
your desired name to the camera and tap the buttons “Save” and “You may start
using your camera now”.
2.4Ghz Wi-Fi required Your Y¥1 Outdoor Camera Al+ is now ready to use.
Mounting Instructions
Step 1
Ptan the route of the cable from the power outlet to the camera and choose an
appropriate spot.
Step 2
Use anchors and screws to mount the base to the wall.
If the wall is wooden, you can screw the mount directly into the wall.
Step 3
Attach your camera to the mounted base. Adjust the camera angle to a suitable
position, then tightly !ock the universal ball mount.
Step 4
Use the cable clips to fasten the power cable. Ensure that you do not o-over-
fasten the cable clips. while mounting, pay attention to the following:
If you
do not want to mount your camera to a wall, use the included camera stand to
place your camera anywhere.
Specifications
- Maximum Resolution: 1920 x 1080
- Lens: Wide-Angle
- Audio: Built-in Mic/Speaker
- Photographic Enhancement: 3D Digital Noise Reduction
- Alert Modes: Human Detection, Motion Detection
- Weather Resistant Grade: IP-65
- Support Platforms: Android AOS / PC / MAC
- Wireless Encryption: WEP/AWPAMWPA2
- USB Cable Length: 3 Meters
- Power Supply: DC SV/MA
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause hammful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The distance between user and products should be no less than 20cm This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. if this equipment does cause harmful interference to
radio or television reception, which can be determined by tuming the equipment
off and on, the user is encouraged to try to correct the interference by one
or mare of the following measures:
- Reorient of relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC WARNING
This device contains licence-exempt transmitter(s Wreceiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired aperation of tha device
The distance between user and products should be no less than 20cm
FCC IO: 2AFIB-YHS3020
10; 20438-YHS302
Manufacturer: Shanghai Xiaoyi Technology Co., Lid.
Address: Building 18, NO.S6 Chuanhe Road,
Pudong New District, Shanghai, China
http://Awvew.yilachnalogy.cam
FCC ID: 2arte-vH63020
MUNGA VEE sC: 20436-YHS3020
Documents / Resources
| YI
YI Waterproof Outdoor Wifi
Camera
[pdf] User Manual
YI Waterproof Outdoor Wifi Camera, YI, Waterproof Outdoor Wifi Camera, Outdoor
Wifi Camera, Wifi Camera, Camera
---|---