AIGOSTAR SSP Eco G Outdoor LED Solar Light Instruction Manual
- June 14, 2024
- aigostar
Table of Contents
AIGOSTAR SSP Eco G Outdoor LED Solar Light
Product Parameter:
- Model SSP-Eco-G
- Power sow
- Solar panel DCSV/4W
- Battery specifications 32700 S000mAh
- Luminous flux 500ml
- CCT 3000/4000/6500k
- IP rating IP65
- Place of installation Walls, stumps
- Suggested installation height 3 m
- Working temperature -30°C-85°C
- Charging time 4-6h
- Working time 12h
- Weight 605g
- Control distance 8m
Controller parameters
Installation Instructions:
- Make a hole at the installation position (according to the distance between the holes of the bracket). Insert the fish-shaped screw plugs into the holes and knock them into place, and install the bracket with self-tapping screws; or tie the bracket at the installation position with a tie.
- Fix the solar panel on the bracket with a screw by hand. Adjust the angle: the face of the photovoltaic panel towards 5-10 degrees west to south and at a certain angle to the horizontal (30 degrees in the south, 45 degrees in the north), and twist it tightly.
- Make holes at the installation position (3 holes at the installation position according to the distance between the holes of the universal bracket). Insert the fish-shaped screw plugs into the holes and knock them into place, install the universal bracket with self-tapping screws, screw the light body counterclockwise into the universal bracket and fix it, and adjust the light source irradiation direction.
- Connection : plug in the male and female plugs and tighten the waterproof nuts. Check and secure after installation. Press the switch on the back of the power box and remove the PVC spacer at the end of the remote control to control the working mode of the luminaire.
CAUTIONS:
- Please keep the installation tools away from children.
- Batteries are included. Please do not throw away the batteries as they are recyclable items.
- Batteries included. Please do not place the product on fire, as it may explode.
- Do not connect to 110/220V AC to avoid damage to the lamp body.
- Please install on a flat and stable surface, and fix the photovoltaic panel and the light body to avoid injuries.
- In order not to affect the use, please clean dust or debris on the surface of the solar PV panel every 3-4 months.
- In autumn, winter, continuous cloudy or rainy days, the charging effect will be weakened and the lighting time will be shortened, which is a normal phenomenon.
- Avoid installing the light near air conditioners, heating objects or high voltage grid systems.
- Please charge for more than 48 hours for first use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>