COSTWAY TS10024 Toddler Climber Slide User Manual
- June 14, 2024
- COSTWAY
Table of Contents
USER’S MANUAL
Toddler Climber Slide
TS10024
Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
US office: Fontana
UK office: Ipswich
AU office: Truganina
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start
Please read all instructions carefully and keep it for future reference.
Warnings:
Attention: For home use only.
Attention: The product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking hazard.
Danger: Lack of attachment may cause a risk of tipping or falling hazard.
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Ensure a secure surface during installation, and place the product always on a
flat, steady and stable surface.
Please check and maintain it regularly, and the most important part needs to
be suspended, fixed, or anchored to the ground.
Installation instructions
Connect the lower handrail (C2) with the lower sliding end (f1) through the knob (J*4) and complete the installation of Part 1.
Connect the upper handrail (A2) with the upper slide section (B1) by the knob (J*6) and complete the installation of Part 2.
Assemble the sliding part 1 and part 2 with the knob (J 2) and square bracket (K 2), and complete the installation of Part 3.
Assemble the part 3 and two side panels (M2), seat panel (D1), climbing panel (E1) using the big nuts (I6), and complete the installation of Part 4.
Install the basket frame (L1), hook (O1) and triangular plate (H2) on the side panel (M2) with the big nuts (I6). Finally clip the telescope (N1) into the side panel, and install the basketball net (R1) on the basket frame (L1) to complete the assembly of climbing mode.
Install the basket frame (L1), hook (O1), triangle plate (H2) and pedal
(G2) onto the side panel (M2) with the big nuts (I10). Finally, clip the
telescope (N1) into the side panel, and install the basketball net (R1) onto
the basket frame (L*1)to complete the
assembly of pedal mode.
Slide usage mode
Contact Us !
Do NOT return this item.
Contact our friendly customer service department for help first.
US: [email protected]
UK: [email protected]
AU: [email protected]