Spedal CL786 Portable Car Stereo with Wireless Car Play and Android Auto User Manual

Spedal CL786 Portable Car Stereo with Wireless Car Play and Android Auto

Safety Guidelines

Warnings

• Do not operate this product while driving.
• Do not install or operate this product with wet hands.
• Do not install this product in a place with high temperature, humidity, flammable, explosive gas or liquid.
• Do not install this product in an area that interferes with the driver’s sight or driving safety.
• Do not install this product on the airbag cover or within the working range of the airbag.
• Do not leave this product in a closed vehicle with high tem-perature for a long time.
• Do not operate this product over rated voltage.
• Do not use non-original cables and accessories.
• Do not use sharp objects such as awls or scissors to cut this product and its accessories.
• Do not disassemble, repair or modify this product and acces-sories by yourself.
• Do not install, use or place this product within the reach of children under 16 years of age.

Precautions

• Do not press the lens too hard to avoid damage or dislocation of the lens.
• Do not directly touch the lens surface, so as not to affect the recording effect.
• Do not remove the memory card during the shutdown process to avoid file damage.
• When using the memory card for the first time, please format it on this product to ensure stable reading and writing.
• When not using the product for a long time, please pull out the memory card to ensure the performance of the memory card.

Scan the QR code, select the corresponding model, and view the User Manual.

• https://spedal.cc/html/support/download/navicam.html
• For any questions please contact support@spedaltech.com

User Guide

Package List

Note
Do not use cables and components that are not original. Gifts and accessories are not covered under warranty. The package contents of this product may change without prior notice, and the actual contents of the package shall prevail.

Product Introduction

Suction Bracket Installation

1. Align the suction bracket clips with the holes on the back of the device and push them up to secure the bracket.
2. Thoroughly clean and dry the car dashboard surface, remove dust or debris, and make sure the surface is flat.
3. Remove the 3M adhesive release paper from the dashboard pad mounting disk and adhere it to a clean instrument panel surface.
4. Allow to sit for 3 hours or more to ensure a strong bond. Then remove the protective film from the dashboard pad.
5. Tear off the protective film from the suction bracket, place the suction cups firmly in the center of the dashboard pad mounting disk, and press the lock button.
6. Adjust the angle of the device screen.

Note
The installation position of equipment and brackets should not block the driver’s sight and affect driving safety.

Device Installation
Insert the power cable into the car cigarette lighter, and connect the other end to the power interface of the device.

Note
Depending on the vehicle, the cigarette lighter socket may be located in a different position. The figure provided is for reference only.

Audio Cable Installation

1. Insert the audio cable into the car AUX port, and connect the other end to the AUX OUT port of the device.
2. Set the car’s audio input mode to AUX audio input. After the connection is successful, you can play music, navigation, calls and more through your car’s audio system.

Note
Please confirm if your car supports AUX IN and note that the location of the AUX may vary depending on the car model. Please consult your manufacturer for more details.

TF Card Installation Optional）

• Insert the TF card into the TF card slot.
• The self-provided TF card should meet the following requirements: Class 10 o r above, the capacity does not exceed 128GB.

Camera Installation-1（Optional）

1. Tear off the protective film of the camera lens.
2. Peel off the 3M adhesive release paper from the camera mount, attach the camera to the windshield, and press firmly to secure it.
3. Connect the device via the camera connection cable.
4. Adjust the angle of the camera lens.

Camera Installation-2（Optional）

1. Tear off the protective film of the camera lens.
2. Peel off the 3M adhesive release paper from the camera mount, attach the camera on car rear wind-shield, and press firmly to secure it.
3. Connect the device via the camera connection cable.
4. Adjust the angle of th e camera lens.

Features And Settings

Home Screen

Apple CarPlay

Apple CarPlay Wireless Connection

Note
The iPhone version that supports wireless CarPlay requires the following

• iPhone is running iOS 9 or higher. (such as iPhone XR and above; iPhone 11 and above; iPhone SE (second generation) and above, etc.)
• It also requires the CarPlay system and the iPhone’s voice system to be turned on. Please check if Siri is enabled.
• When using wireless CarPlay for the first time, the connection time may take around 30 seconds, please be patient.
• For more details visit: http://www.apple.com/ios/carplay
• Click” ”on the home screen to enter the CarPlay.

1. Go to Settings on your iPhone, turn on “Bluetooth” and “Wi-Fi”
2. Enter the “Bluetooth ”menu and select the Bluetooth device starting with “T86-*****” from the list of “Other DEVICES” Bluetooth devices.
3. Wait for about 20-30 seconds, and a prompt “Bluetooth Pairing Request” will pop up on your phone. Select “Pair” to successfully pair your phone with the device.
4. Then, a prompt “Use CarPlay with”SmartScreen”?” will pop up on your phone. Select“Use Carplay”.
5. Please wait for a moment and you will enter the CarPlay mode.

Note

1. Different versions of iOS may display differ- ently, please refer to the actual situation.
2. The first connection may take a longer time, please be patient.
3. If you want to switch to Android Auto or AirPlay, you need to turn off Bluetooth and Wi-Fi on your phone to disconnect the Apple CarPlay connection mode.

Apple CarPlay Audio Out

• Click“ ”on the home screen to enter the Audio Out.

1. Built-in Speaker
   • The sound is played from the speaker of the device.
2. Bluetooth
   • In CarPlay/Android Auto mode, the phone is directly connected to the car’s Bluetooth (if the phone has been paired with the car’s Bluetooth before, there is no need to repeat the connection operation).

• Go to Settings on your iPhone > Bluetooth turn on the “Bluetooth”.
• In the “Other Devices” Bluetooth device list, select the Bluetooth name of your car.
• A prompt will pop up on the phone, choose “Pair”, and the phone will pair successfully with the car’s Bluetooth.

AUX Connection

Connect to the car through an AUX cable, and the sound will play from the car’s speakers.

• Insert the audio cable into the car AUX port, and connect the other end to the AUX OUT port of the device.
• Set the car’s audio input mode to AUX audio input. After the connection is successful, you can play music, navigation, calls and more through your car’s audio system.

Note
Please confirm if your car supports AUX IN and note that the location of the AUX may vary depending on the car model. Please consult your manufacturer for more details.

FM Transmitter

Connect through FM to play sound through your car’s audio system.

• Adjust the car FM to a frequency that is not occupied by the broadcast, and adjust the device FM to the same frequency; for example, adjust the car FM to 91.0MHz (if not occupied), and then adjust the the FM frequency of the device to 91.0MHz, as well, and the FM function is turned on; after the connection is successful, the sound on the device will be transmitted to the car speakers.
• When the FM is on, you can select the button or slide the pointer to adjust the frequency.

Refer to [3.1 Home Screen]

Android Auto

Android Auto Connect With USB
Type-C Cable （Optional）

Note
What you need

1. An Android phone with Android 8.0 (Oreo) and up, an active data plan, and the latest version of the Android Auto app.
2. An original USB cable.

Before you connect your phone for the first time, turn on your car. Make sure your car is in park (P) and allow time to set up Android Auto before you start your drive.

1. Plug a USB cable into the USB port on cigarette charger, plug the other end of the cable into your mobile phone.
2. Your phone might ask you to download the Android Auto app or update to the newest version of the app.
3. Follow the on-screen instructions to complete setup.

Your phone’s Bluetooth is turned on automatically when Android Auto is connected to the car via USB.

• For more details visi t: https://www.android.com/auto

Android Auto Wireless Connection

Note
What you need
A compatible Android phone with an active data plan, 5 GHz Wi-Fi support, and the latest version of the Android Auto app. Wireless projection is compatible with these Android versions:

1. Any phone with Android 11.0.
2. A Google or Samsung phone with Android 10.0.
3. A Samsung Galaxy S8, Galaxy S8+, or Note 8, with Android 9.0.
4. Go to Settings on your phone, turn on “Bluetooth” and “Wi-Fi”.
5. Click on “Bluetooth” to enter the Bluetooth search page.
6. After entering the “Bluetooth” menu, click “Pair new devices” to search for new Bluetooth devices.
7. Select the Bluetooth device starting with “T86-*****” from the list of “Other DEVICES” Bluetooth devices.
8. Wait for about 20 seconds, a prompt box will pop up on the phone with “Pair with T86-*****”, click “Pair” (as shown below), and wait for the Bluetooth pairing to complete. After the Android Auto connection is completed, it will automatically enter the Android Auto mode.

Note

• Different models of Android phones may display differently, please refer to the actual situation.
• The first connection takes a longer time, please be patient.
• If you want to switch to CarPlay/AirPlay/Android Cast, you need to turn off Bluetooth and WIFI on your phone and disconnect from Android Auto connection mode.

Andorid Auto Audio Out

Click“ ”on the home screen to enter the Audio Out.

1. Built-in Speaker
   • The sound is played from the speaker of the device.
2. Bluetooth
   • In CarPlay/Android Auto mode, the phone is directly connected to the car’s Bluetooth (if the phone has been paired with the car’s Bluetooth before, there is no need to repeat the connection operation).
   • Go to Settings on your phone > Bluetooth turn on the “Bluetooth”.
   • Enter Bluetooth search page.
   • Click“Pair new devices”to search new Bluetooth device.
   • Select your car’s Bluetooth name pairing from the list of searched Bluetooth.
   • Wait for about 20 seconds, the phone pops up the box “Pair with “Car**””, click “Pair”, wait for the Bluetooth pairing to finish. The audio will be played from the car.

Note

1. Due to differences in Android phone models, the display may vary.
   • Refer to your specific device for accuracy.
2. The initial connection time might be relatively long, please be patient.
3. AUX Connection
   • The same as the page 08–3.2.2–3.Aux Connection.
4. FM Transmitter
   • The same as the page 09–3.2.2–4.FM Transmitter.

Apple AirPlay
Apple AirPlay Wireless Connect

1. Go to Settings on your iPhone > Wi-Fi
2. Select the WiFi network with the name starting with “CARLINK-*****” and connect to it. Enter the password, the default password is “12345678”.
3. Swipe down from the top of the iPhone screen to access the Control Center menu, then tap “Screen Mirroring”.
4. Click on “SmartScreen” to complete Screen Mirroring.

Android Cast

Click ” ” on the home screen to enter the Android Cast.

1. Scan the QR code on the Android Cast screen to download the TcLink App.
2. Connect your phone to Bluetooth, the Bluetooth name i “CARLINK-**”.
3. Open the installed TcLink App on your phone, select the Blue-tooth name and click “CONNECT”. In the popup, choose “Allow”. Android Cast connection is successful.

Bluetooth Manage
First click on Apple CarPlay or Android Auto on the main screen, or enter Bluetooth Music. Then click the ” ” butBT Manage ton on the right side of the screen to enter the Bluetooth management menu.

Refer to [3.1 Home Screen]

Media Player

Click “ ” on the home screen to enter the Media Player.

Bluetooth music
First, click on any of the Apple CarPlay, Android Auto, AirPlay, or Android Cast icons on the main screen, then tap on the ” ” (Bluetooth music ) “ button in the bottom right corner to enter the  Bluetooth music mode. Settings

Click ” ” on the home screen to enter the Settings mode.

Screen saver
Set the time for the screen to automatically turn off. 1 minute, 5 minute or off can be selected.

Wallpaper
You can set the system wallpaper, with three options available.

Voice control
Turn on or off voice control, the voice commands are “Turn on display” and “Turn off display”.

Auto-dimming
Enable or disable eye care mode, you can set the brightness of the eye care mode, as well as start and end times. (Only effective when connected to Apple CarPlay or Android Cast).

Driving Position
Set driving position, with options for left-hand or right-hand steering.

Language
Set the language displayed by the system. 简体中文 , 繁體中文 , English, Français, Español, Português, Deutsch, Italiano, Русский язык, 日本語 ,한국어 or Български can be selected.

Factory reset
Restore all settings to the factory default values.

Firmware version
View the current firmware version information of the host.

more product information www.spedal.cc more product videos YouTube search sepal

Download manuals of other languages from our homepage.

• USA Customer Service Hotline ：+1(463)207-9998
• For any questions please contact support@spedaltech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>