Spedal CL796N Smart Multimedia Dashcam User Manual
- June 12, 2024
- Spedal
Table of Contents
Spedal CL796N Smart Multimedia Dashcam
Product Information
The Smart Multimedia Dashcam CL796N is a user-friendly device designed to capture high-quality video and audio while driving. It features a 7-inch IPS screen, a built-in microphone, and a lens for recording. The dashcam comes with a TF card slot for storage, various ports including AV IN, mini USB, AUX OUT, and USB-C, and includes essential components such as a power cable, USB-C to Lightning cable, USB-C to USB-C cable, audio cable, TF card, and a user manual.
Product Usage Instructions
Disclaimer and Safety Guidelines:
- Disclaimer: Read and understand the safety guidelines before using the product.
- Safety Guidelines:
- Warnings:
* Do not operate the dashcam while driving.
* Do not install or operate the dashcam with wet hands.
* Avoid installing the dashcam in areas with high temperature, humidity, flammable or explosive substances.
* Avoid installing the dashcam in a position that obstructs the driver’s sight or driving safety.
* Do not install the dashcam on the airbag cover or within the airbag’s working range.
* Avoid leaving the dashcam in a closed vehicle with high temperatures for an extended period of time.
* Do not operate the dashcam over the rated voltage.
* Use only original cables and accessories.
* Avoid using sharp objects to cut or damage the dashcam and its accessories.
* Do not disassemble, repair, or modify the dashcam and its accessories by yourself.
* Keep the dashcam out of the reach of children under the age of 16.
2. **Precautions:**
* Avoid pressing the lens too hard to prevent damage or dislocation.
* Avoid directly touching the lens surface to maintain optimal recording quality.
* Do not remove the memory card during the shutdown process to prevent file damage.
* Format the memory card using the dashcam before initial use for stable reading and writing.
* If not using the dashcam for a long time, remove the memory card to ensure memory card performance.
Preparations for Product Use:
- Products and Components: The package includes the following items:
- CL796N dashcam x 1
- Bracket x 1
- Power Cable x 1
- USB-C to Lightning Cable x 1
- USB-C to USB-C Cable x 1
- Audio Cable x 1
- TF Card x 1
- User Manual x 1
Note: Only use original cables and components. Gifts and components are not covered under warranty. The actual package contents may vary.
-
Product Introduction: The dashcam features a 7-inch IPS screen, microphone, lens, TF card slot, AV IN port, mini USB port, AUX OUT port, power button, and USB-C port.
-
Installation Guide:
-
TF Card Installation: Insert the TF card into the TF card slot with the metal side facing down. Use the provided
TF card or ensure that a self-provided TF card meets the requirements of Class 10 or above with a capacity not exceeding 128GB. -
Bracket Installation:
-
Push up the snap of the dash mount and align it with the hole on the back of the device. Fix the bracket securely.
-
Select a suitable position, such as the center of the front windshield or on the dashboard.
-
Peel off the protective film on the stand suction cup. Attach the suction cup to the desired position and press the locking piece to secure it.
-
Adjust the angle of the screen and lens according to your preference.
Disclaimer And Safety Guidelines
Disclaimer
Thank you for purchasing this Spedal product. The content mentioned in this
manual is related to your safety and legal rights and responsibilities. Before
using this product, please read this document carefully to ensure proper
product settings. Failure to follow the instructions and warnings in this
document may result in injury to you and people around you, as well as damage
to this product or other objects nearby. The final interpretation right of this
document and related documents belongs to Shenzhen Xinzhuang Goodo Technology
Co., Ltd. Subject to update without notice. Please visit http://spedal.cc
for the latest product information.
Once you use this product, it is deemed that you have carefully read the
disclaimer and warnings, and understand, recognize andaccept all the terms and
contents of this statement. You undertake to take full responsibility for the
use of this product and the possible consequences.
Spedal is not responsible for damage, injury, or any legal liability arising
directly or indirectly from the use of this product. Users should follow all
safety guidelines including but not limited to those mentioned in this
article.
Safety Guidelines
Warnings
- Do not operate this product when driving.
- Do not install or operate this product with wet hands.
- Do not install this product in a place with high temperature, humidity, flammable, explosive gas or liquid.
- Do not install this product in an area that interferes with the driver’s sight or driving safety.
- Do not install this product on the airbag cover or within the working range of the airbag.
- Do not leave this product in a closed vehicle with high temperature for a long time.
- Do not operate this product over rated voltage.
- Do not use non-original cables and accessories.
- Do not use sharp objects such as awls or scissors to cut this product and its accessories.
- Do not disassemble, repair or modify this product and accessories by yourself.
- Do not install, use or place this product within the reach of children under the age of 16.
Precautions
- Do not press the lens too hard to avoid damage or dislocation of the lens.
- Do not directly touch the lens surface, so as not to affect the recording effect.
- Do not remove the memory card during the shutdown process to avoid file damage.
- When using the memory card for the first time, please format it on this product to ensure stable reading and writing.
- When not using the product for a long time, please pull out the memory card to ensure the performance of the memory card.
Preparations For Product Use
Products And Components
Note
Do not use non-original cables and components. Gifts and components are not
covered under warranty. The package contents of this product are subject to
change without prior notice, and the actual package contents shall prevail.
Product Introduction
- 7inch IPS Screen
- Microphone
- Lens
- TF Card Slot
- AV IN Port
- mini USB Port
- AUX OUT Port
- Power Button
- USB-C Port
Installation Guide
TF Card Installation
- Insert the TF card into the TF card slot with the metal side facing down.
- Please use the TF card that comes with this product. The self-provided TF card should meet the following requirements: Class 10 or above, the capacity does not exceed 128GB.
Bracket Installation
- Push up the snap of the dash mount, align with the hole on the back of the device, and fix the bracket.
- Select a suitable position (such as the center of the front Windshield or on the dashboard.
- Peel off the protective film on the stand suction cup, attach the suction cup to the position you want to install, and press the locking piece.
- Adjust the angle of the screen and lens of the device.
Note
The installation position of equipment and brackets should not block the
driver’s sight and affect driving safety.
Device Installation
Insert the power cable into the car cigarette lighter, and connect the other
end to the power interface of the device.
Audio Cable Installation
- Insert the audio cable into the car AUX port, and connect the other end to the AUX OUT port of the device.
- Set the car’s audio input mode to AUX audio input. After the connection is successful, you can play music, naviga-tion, calls and more through your car’s audio system.
Features And Settings
Home Screen
Android Auto Mode
Insert one end of the USB-C to USB-C cable into the Android phone, and the
other end into the USB-C port of the device. after the connection is
successful, the device will display the Android Auto working interface, and
the mobile phone will display the Android Auto application icon.
Note
Please make sure your Android phone version is higher than Android 11.
Carplay Mode
Insert one end of the USB-C to lightning cable into the mobile phone, and the
other end into the USB-C port of the device; after the connection is
successful, the device will enter Carplay mode automatically.
Note
- Please make sure your iphone version is higher than iOS9;
- If you want to control the device by voice, please open Siri in the iphone.
DVR Mode
Click ” ” on the home screen to enter the DVR mode.
Refer to [3.1 Home Screen]
FM Mode
Click “ ” on the home screen to enter FM mode.
- Adjust the car FM to a frequency that is not occupied by the broadcast, and adjust the device FM to the same frequency; for example, adjust the car FM to 91.0MHz (if not occupied), and then adjust the the FM frequency of the device to 91.0MHz, as well, and the FM function is turned on; after the connection is successful, the sound on the device will be transmitted to the car speakers.
- When the FM is on, you can select the button or slide the pointer to adjust the frequency.
Note
If you do not need to use the car audio, please set the FM to OFF, otherwise
the device will not output sound.
Refer to [3.1 Home Screen]
Playback Mode
Click “ ” on the home screen to enter the playback mode, where you can play,
lock, unlock, delete videos or pictures.
Settings Mode
Click “ ” on the home screen to enter the Settings mode.
Video Settings
General Settings
more product information www.spedal.cc
more product videos youtube search spedal
Download manuals of other languages from our homepage.
For any questions please contact support@spedaltech.com