Spedal CL786 Apple Carplay and Android Auto 1080P Dash Cam User Guide

CL786 Apple Carp lay and Android Auto 1080P Dash Cam
User Guide

Use Guide

Package List

Note
Do not use cables and components that are not original. Gifts and accessories are not covered under warranty. The package contents of this product may change without prior notice, and the actual contents of the package shall prevail.

Product Introduction

Suction Bracket Installation

1. Align the suction bracket clips with the holes on the back of the device and push them up to secure the bracket.
2. Thoroughly clean and dry the car dashboard surface, remove dust or debris, and make sure the surface is flat.
3. Remove the 3M adhesive release paper from the dashboard pad mounting disk and adhere it to a clean instrument panel surface.
4. Allow to sit for 3 hours or more to ensure a strong bond. Then remove the protective film from the dashboard pad.
5. Tear off the protective film from the suction bracket, place the suction cups firmly in the center of the dashboard pad mounting disk, and press the lock button.
6. Adjust the angle of the device screen.

Note
The installation position of equipment and brackets should not block the driver’s sight and affect driving safety.

Device Installation

Insert the power cable into the car cigarette lighter, and connect the other end to the power interface of the device.

Note
Depending on the vehicle, the cigarette lighter socket may be located in a different position. The figure provided is for reference only.

Audio Cable Installation

1. Insert the audio cable into the car AUX port, and connect the other end to the AUX OUT port of the device.
2. Set the car’s audio input mode to AUX audio input. After the connection is successful, you can play music, navigation, calls and more through your car’s audio system.

Note
Please confirm if your car supports AUX IN and note that the location of the AUX may vary depending on the car model. Please consult your manufacturer for more details.

 TF Card Installation Optional）

• Insert the TF card into the TF card slot.
• The self-provided TF card should meet the following requirements: Class 10 or above, the capacity does not exceed 128GB.

Camera Installation-1 Optional）

1. Tear off the protective film of the camera lens.
2. Peel off the 3M adhesive release paper from the camera mount, attach the camera to the windshield, and press firmly to secure it.
3. Connect the device via the camera connection cable.
4. Adjust the angle of the camera lens.

Camera Installation-2 Optional）

1. Tear off the protective film of the camera lens.
2. Peel off the 3M adhesive release paper from the camera mount, attach the camera on car rear windshield, and press firmly to secure it.
3. Connect the device via the camera connection cable.
4. Adjust the angle of the camera lens.

Safety Guidelines

Warnings

• Do not operate this product while driving.
• Do not install or operate this product with wet hands.
• Do not install this product in a place with high temperature, humidity, flammable, explosive gas or liquid.
• Do not install this product in an area that interferes with the driver’s sight or driving safety.
• Do not install this product on the airbag cover or within the working range of the airbag.
• Do not leave this product in a closed vehicle with high temperature for a long time.
• Do not operate this product over rated voltage.
• Do not use non-original cables and accessories.
• Do not use sharp objects such as awls or scissors to cut this product and its accessories.
• Do not disassemble, repair or modify this product and accessories by yourself.
• Do not install, use or place this product within the reach of children under 16 years of age.

2.2 Precautions

• Do not press the lens too hard to avoid damage or dislocation of the lens.
• Do not directly touch the lens surface, so as not to affect the recording effect.
• Do not remove the memory card during the shutdown process to avoid file damage.
• When using the memory card for the first time, please format it on this product to ensure stable reading and writing.
• When not using the product for a long time, please pull out the memory card to ensure the performance of the memory card.

Scan the QR code, select the corresponding model, and view the User Manual. https://spedal.cc/html/support/download/dashcam.html
For any questions please contact support@spedaltech.com

https://spedal.cc/html/support/download/dashcam.html

https://spedal.cc/|
---|---
more product information www.spedal.cc| https://www.youtube.com/channel/UCVgJiS_E9nlhw4VBmnz0zoA
more product videos YouTube search Spedal

For any questions please contact support@spedaltech.com

References

• Spedal
• DASHCAM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>