ZYXEL COMMUNICATIONS WX5610-B0 WiFi 6E Tri Band Gigabit Wireless Extender User Guide

ZYXEL COMMUNICATIONS WX5610-B0 WiFi 6E Tri Band Gigabit Wireless Extender

WX5610-BO
AX7800 WiFi 6E Tri-Band Gigabit Wireless Extender

A member of the Zyxel MPro Mesh'” PLUS solution family.

MPro Mesh™ PLUS Solution

• EX7710-BO
• WX5610-BO
• MPro MeshT” PLUS App
• Visit www.zyxel.com/us/en for updated information.

Package Contents

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.

US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en /

Support Information

• North America 16 + 1 800 978 7’22.
• USA 181 support@zyxel.com
• https://service-provider.zyxeI.com/gIobaI/en/teeh-support
• Copyright© 2023 Zyxel and/or its affiliates. All Rights Reserved.

Connect to EX7710-B0 via WiFi (See the next page to connect via cable.)

1. Place the WX5610-B0 Near Your EX7710-B0

   • Place your WX5610-B0 next to your Zyxel EX7710-B0 gateway (within 2 meters) for initial setup. You can move the WX5610-B0 to a new location after the initial setup.

2. Power on

   • Blue Blinking – System is b ooting.
   • System is ready.
   • Red On – System has failed.
   • Off On – System is powered off.
   • Use the included power adaptor to connect the WX5610-B0 power socket to an appropriate power outlet and wait until the POWER LED stays on solid blue. If the LED does not stay on solid blue, un-plug the power adaptor and plug it back in again.

3. Connect the WX5610-B0 to Your EX7710-B0
   

   • Orange – Your WX5610-B0 is connected to the Zyxel EX7710-B0 gateway.
   • On or Blinking – Your WX5610-B0 is ready for your wireless devices to connect.
   • Press the WPS button once, the WX5610-B0 WPS LED blinks green.
   • Within Two minutes, press the WPS button on your Zyxel EX7710-B0 gateway. If the WX5610-B0 WPS LED turns red, do the process again.
   • Wait for Two minutes. When the WPS LED is orange and the WiFi LED is on or blinking, continue to the next step to connect your wireless device to the WiFi.

4. Connect Your Device to the WiFi

   • Check whether the WPS LED is SOLID ORANGE.
   • If SOLID ORANGE: Your WX5610-B0 has synced the WiFi name (SSID)/password with your Zyxel EX7710-B0 gateway. Connect your wireless device to the gateway’s WiFi name (SSID). The default WiFi name and password are on the EX7710-B0’s label. 
   • If OFF : Connect your wireless device to the WiFi name (SSID)/password on the WX5610-B0 bottom label. 

5. Relocate the WX5610-B0 to an Optimal Location

   • Green – Good location.
   • Red or off- Move closer to the Zyxel EX7710-B0 gateway.
   • Unplug your WX5610-B0 and move it to a new location about halfway between your Zyxel EX7710-B0 gateway and the area with a poor WiFi signal.
     Plug in your WX5610-B0. The WX5610-B0 must be within range of your Zyxel EX7710-B0 gateway’s WiFi network. If the WPS LED @ is OFF or RED, move the WX5610-B0 closer to the Zyxel EX7710-B0 gateway and try again until the WPS LED@ lights green. Now you can use WiFi and the internet.

Connect via Cable (Optional)

1. Power on

   • Blue Blinking – System is booting. On – System is ready.
   • Red On – System has failed.
   • Off – System is powered off.
   • Use the included power adaptor to connect the WX5610-B0 power socket to an appropriate
     power outlet and wait until the POWER LED C) stays on solid blue. If the LED does not stay on solid blue, un-plug the power adaptor and plug it back in again.

2. Connect the WX5610-B0 to Your Modem/Router

   • Use the included Ethernet cable to connect 2.5G LAN or 1G LAN on the WX5610-B0 to an Ethernet port on your modem/router.

3. Connect Your Device to the WiFi

   • Check whether the WPS LED is SOLID GREEN, or OFF.
   • If SOLID GREEN: Your WX5610-BO has synced the WiFi name (SSID)/password with your Zyxel gateway. Connect your wireless device to the existing WiFi name (SSID). The default WiFi name and password are on the Zyxel gateway label. 
   • If OFF : Connect your wireless device to the WiFi name (SSID)/password on the WX5610-B0 bottom label. Now you can use WiFi and the internet. 

App Management

1. After successfully surfing the internet, please download the MPro Mesh'” PLUS app to your wireless device.
2. Open this app and enter the serial number from the WX5610-B0’s bottom label.
3. Use this app to enjoy the following features
   • Remote Management
   • View Home Devices
   • Guest Wi-Fi
   • Manage Home Wi-Fi Name
   • Internet Instant Block
   • Add Mesh Extender
   • Push Notification

LED Descriptions

FCC Warning
See the following legal and regulation information at http:/1192.168.1.2/legallnfo.

Legal and Regulation

• Model Name : WX56 l 0-B0

• Product Name : AX78D0 WiFi 6E Tri-Band Gigabit Wireless Extender

• US importer: Zyxel Communications, Inc, 1130 North Miller Street Anaheim, CA92806-200l

• FCC ID : 188WX5610-B0

• IC: 2468C-WX56 l 0B0

FCC Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Indoor use only.

ISED Warning Statement

• A Operation shall be limited to indoor use only; and B. Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on larger aircraft flying above l 0,000 ft.
• CAN ICES-003(B}/NMB-003(B)
• This product contains in part some free software distributed under GIPL license terms and/or GPL like license. Please visit www.us.zyxel.com/opensource/ for source code and additional information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>