K-WHEEL Pro Multi Platform Gaming Wheel User Guide

K-WHEEL Pro Multi Platform Gaming Wheel

Technical Specifications

GENERAL FEATURES

Wheel

• Manual gear Gear stick and wheel paddles
• Buttons 15 buttons
• PC input X-Input & D-Input
• Turning degrees 900º / 270º
• Pedals Spring loaded
• Fixing system Suction cups
• Working power 5V / ≤160 mA

SYSTEM

REQUIREMENTS

• PC
• PS3TM / PS4TM*
• Xbox One®*
• Nintendo Switch
• Connection USB
• Cable lenght 240 cm
• Dimensions 330x350x330 mm
• Weight 4.200 gr
• Controller required

SYSTEM REQUIREMENTS

1. Operating system:
   Windows Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 PS3 / PS4
   Xbox One
   Nintendo Switch

2. Free USB 2.0 / 3.0 port.

3. Software installation (just for PC D-Input mode).

• Requires a gamepad controller

STEERING WHEEL DIAGRAM

1. L/R buttons
2. L1 / 5 / LB
3. L2 / 7 / LT
4. L3 / 11 / SL
5. R1 / 6 / RB
6. R2 / 8 / RT
7. R3 / 12 / SR
8. Paddles
   • L-Wing
   • R-Wing
9. D-Pad
10. Menu buttons
    • PROG
    • Share / 9
    • MODE
    • Option / 10
    • SHARE
11. Main buttons
    • X / 4 / Y
    • Y / 1 / X
    • B / 2 / A
    • A / 3 / B
12. 900º / 270º rotation switch

GEAR LEVER DIAGRAM

1. 6+1 gears
2. High / Low switch
3. Hand brake

PEDALS DIAGRAM

1. Clutch

2. Brake
   · Y-·LT

3. Accelerator X·Y+·RT

K-Wheel Pro’s buttons

BUTTONS CORRESPONDENCE TABLE

BUTTON TYPE|

PS3

|

PS4

|

XBOX ONE

| PC

(X-INPUT)

| PC

(D-INPUT)

| PC

(WHEEL MODE)

|

SWITCH

---|---|---|---|---|---|---|---

ACTION BUTTONS

| X| X| A| A| 3| 3| B
 |  | B| B| 2| 2| A
 |  | X| X| 4| 4| Y
 |  | Y| Y| 1| 1| X
R1| R1| RB| RB| 6| 6| R
L1| L1| LB| LB| 5| 5| L
R2| R2| RT| RT| 8| 8| ZR
L2| L2| LT| LT| 7| 7| ZL
L3| L3| SL| SL| 11| 11| L
R3| R3| SR| SR| 12| 12| R

D-PAD

| UP| UP| UP| UP| UP| UP| UP
DOWN| DOWN| DOWN| DOWN| DOWN| DOWN| DOWN
LEFT| LEFT| LEFT| LEFT| LEFT| LEFT| LEFT
RIGHT| RIGHT| RIGHT| RIGHT| RIGHT| RIGHT| RIGHT
FUNCTION| START| OPTIONS| MENU| START| 10| 10| +
SELECT| SHARE| VIEW| BACK| 9| 9| –
 | /| /| SHARE BUTTON

(Xbox One X)

| /| /| /| /

BUTTON TYPE

|

PS3

|

PS4

|

XBOX ONE

| PC

(X-INPUT)

| PC

(D-INPUT)

| PC

(WHEEL MODE)

|

SWITCH

---|---|---|---|---|---|---|---
ROTATE| LX| LX| ∑/∂| ∑/∂| ∑/∂| ∑/∂| LX
L=WING| L2| L1| LB| LB| 7| 14| L
R=WING| R2| R1| RB| RB| 8| 15| R
L-FOOTPEDAL|  | CLUTCH| CLUTCH| LT| Y-| Y-| X
M-FOOTPEDAL|  | L2| LT| LT| Y-| RZ| B
R-FOOTPEDAL| X| R2| RT| RT| Y+| Z| A
MODE| MODE| MODE| X-GUIDE| X-GUIDE| MODE| 13| HOME
PROG| ASSIGN BUTTON| ASSIGN BUTTON| ASSIGN BUTTON| ASSIGN BUTTON| ASSIGN BUTTON| ASSIGN BUTTON| ASSIGN BUTTON

GEAR LEVER

| L1| 1| 1| /| /| 17| L
R1| 2| 2| /| /| 18| R
L1| 3| 3| /| /| 19| L
R1| 4| 4| /| /| 20| R
L1| 5| 5| /| /| 21| L
R1| 6| 6| /| /| 22| R
 | R| R| /| /| 24| Y
 | LO-HI| LO-HI| /| /| 24| Y
 | HAND BRAKE| HAND BRAKE| /| /| 16| A

Installation

• PC

  • A. X-Input
    1. The X-Input mode is set by default, just connect K-Wheel PRO to your PC.

  • D-Input
    1. To enter into D-Input mode, just press HOME button for three seconds.

• PS3 / SWITCH

  • Connect K-Wheel PRO to a PS3/SWITCH. K-Wheel PRO’s pedal and the gear lever to the wheel.
  • Power on the PS3/SWITCH console.
  • The active channel LED indicator will light up when connection is finished: you can now set up or start the game.
  • During PS3 game play, press the HOME button once to enter the XBM window. Press and hold the HOME button to enter MENU setup window.

• PS4

  • Connect K-Wheel PRO to a PS4. Connect K-Wheel PRO’s pedal and the gear lever to the wheel.
  • Power on the PS4 console.
  • Connect a PS4 controller by USB cable to K-Wheel PRO: the controller will function as a bridge to establish the connection between K-Wheel PRO and the console. (The controller has to be off).
  • The moment the connection has been succesfully established, the wheel’s RED LED will be light on, as well as the console controller’s LED indicator. Press the HOME button on the wheel: now you can start the game.
  • During PS4 game play, press the HOME button once to enter the XBM window.
    Note: The controller doesn’t need to be an original PS4 controller, it can be a third part licensed controller.

• XBOX

  • Connect K-Wheel PRO to a XBOX. Connect K-Wheel PRO’s pedal and the gear lever to the wheel.
  • Power on the XBOX console.
  • Connect a XBOX controller by USB cable to K-Wheel PRO: the controller will function as a bridge to establish the connection between K-Wheel PRO and the console. (The controller has to be off).
  • The moment the connection has been succesfully established, the wheel’s RED LED will be light on, as well as the console controller’s LED indicator. Now, you can start the playing.
  • During XBOX game playing, press the HOME button once to enter the main menu.

Buttons Configuration

The buttons that can be configured are the pedals, the gear lever and the rear cams.

• FUNCTION ASSIGNMENT

  • Press the PROG button, the LED indicator will light up in red.
  • Press the button whose function you want to modify and then the button whose action you want to assign.

• RESET TO DEFAULT CONFIGURATION

  • Press the PROG button, the LED indicator will light up in red.
  • Press the OPTIONS button for 4 seconds until the LED indicator stops flashing.

• CHANGE ROTATION VALUE (900º OR 270º)
  Switch the button to left or right to choose the rotation value you want.

• CHANGE STEERING WHEEL SENSITIVITY

  • Press the PROG button until the LED indicator lights up in red. Once there, you can:
  • Set steering wheel minimum sensitivity: pressing D-PAD DOWN button (LED indicator will stop flashing).
  • Set steering wheel medium sensitivity: pressing D-PAD right or left button (LED indicator will stop flashing).
  • Set steering wheel maximum sensitivity: pressing D-PAD up button (LED indicator will stop flashing).

Functions programming

INTRODUCTION

• Program source buttons:
  1·X·Y | ·3·B·A | ·4·Y·X | X·2·A·B | L1·5·LB·L | L2·7·LT·ZL | R1·6·RB·R | R2·8·RT·ZR

• Programmable button:

  • L-Wing L2·7·LB
  • R-Wing R2·8·RB
  • Foot Accelerator X·2·Y+
  • Foot Brake · 1·Y- | L3·11·SL | R3·12·SR | Hand Grear Shift

• PROGRAM SETUP

  • Press the PROG button. The red LED will flash fast.
  • Press the programmable button, the red LED will flash slowly.
  • Press the programme source button, the red LED will illuminate continuously until programming is completed.

• CLEAR SINGLE PROGRAM

  • Press the PROG button. The red LED will flash fast.
  • Press the programmable button, the red LED will flash slowly.
  • Press the programme source button, the red LED will illuminate continuously until clearing is completed.

• CLEAR ALL PROGRAMS

  • Press the PROG button. The red LED will flash fast.
  • Press the OPTIONS / 10 / MENU / + buttons for 4s, the red LED will light up continuously and all programmed key functions will be cleared (by default, the sensitivity will return to medium, except for USB which will be low).

• QUIT ALL PROGRAMS

  • Press the PROG button: the red LED will flash fast. Press PROG again to exit, the previous setting will remain unchanged.
  • Press the PROG button, the RED LED flashes rapidly, the programme will exit automatically if no action is taken within 10 seconds.

• SENSITIVITY ADJUSTMENT

  • Press the PROG button. The red LED will flash fast.
  • Press the D-pad left or right to set the sensitivity to Medium, the red LED will light up continuously once the sensitivity is achieved.
  • Press the PROG button. The red LED will flash fast.
  • Press the D-pad up to set the sensitivity to High: the red LED will light up continuously once the sensitivity is achieved.
  • Press the PROG button. The red LED will flash fast.
  • Press the D-pad down to set the sensitivity to Low: the red LED will light up continuously once the sensitivity is achieved.
  • Press the OPTIONS / 10 / MENU / + buttons for 4s, the red LED will light up continuously and Sensitivity will be restored to default.

• SETTING MAXIMUM ANGLE BELOW 900° ROTATION MODE

  • Set the switch knob to the 900 degree position.
  • Press the PROG button. The red LED will flash fast.
  • Turn the wheel to the right/left at an angle of more than 60 degrees.
  • Press the OPTIONS / 10 / MENU / + buttons, the red LED will light up continuously: the turned angle will be set now as the maximum angle.
  • Clearance of the maximum angle set:
  • Method A: Press the OPTIONS / 10 / MENU / + buttons for 4s to cleared the maximum angle set.
  • Method B: Press the PROG button. The red LED will flash fast. Turn the wheel from centre left/right to 900 degrees (default maximum), press the OPTIONS / 10 / MENU / + buttons to return to the default angle of 900.

• RESTORE STEERING WHEEL’S CALIBRATION TO DEFAULT

  • Set the degree knob to “270” and press the L1 + L2 + R1 + R2 buttons: the LED will flash.
  • Turn the wheel all the way to the left until the LED flashes slowly. Turn the wheel all the way to the right until the LED flashes slowly. Turn the wheel back to the centre position: the LED will flash quickly.
  • Fully depress the right pedal and the left pedal. LED will flash slowly.
  • Press the OPTIONS button until the LED lights up continuously to set the default calibration.

• FOOT PEDALS

  • The left pedal is the clutch, the centre pedal is the brake, the right pedal is the accelerator.
  • Pedal with Clutch function needs game support. If game doesn’t support Clutch function, the clutch pedal will not work.

• GEAR LEVER BUTTONS

  • Connect the gear lever: it will be in racing wheel mode and will need game support.
  • The left LO-HI button is for changing the gear to High / Low. If the button is pressed once, gears 1, 2, 3, 4, 5, 6, R will be shifted as 7, 8, 9, 10, 11, 12, R (high gear). The LED in High Gear will be lit permanently, the LED in Low Gear will be off.
  • High / Low gear switch needs game support
  • The right switch is the Handbrake Function button: press it to start the function, release it to stop the function (needs game support).
  • Press and hold Gear down to change gear 6 as R (return) function.

Warranty

• Who the warranty Protects:
  This warranty is valid to the original purchaser only.

• What the warranty protects:
  For your warranty claims, please contact Krom gaming overseas distribution partners in your country. Find the distribution partner list at www.kromgaming.com

  • Warranty: 2 years from purchasing date. (Depending on the laws of each country)
  • URL: www.kromgaming.com
  • E-mail: support@kromgaming.com

• What the warranty does not cover:

  • Any product, on which the serial number has been defaced, modified or removed.
  • Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
  • Repair or attempted repair by anyone not authorized by Krom gaming.
  • Damage to or loss of any programs, data or removable storage media.
  • Software or data loss occurring during repair or replacement.
  • Any damage of the product due to shipment.
  • Removal or installation of the product.
  • External causes, such as electric power fluctuations or failure.
  • Use of supplies or parts not meeting kromgaming´s specifications.
  • Normal wear and tear.
  • Any other cause which does not relate to a product defect.

If you have any questions regarding technical problems please contact us via our website: WWW.KROMGAMING.COM

KROM reserves the right for any modifications in text and/or images.

References

• Krom Gaming

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>