DURA SHOCK MUB1D Modular Universal Mini Rubber Bump Stops Instruction Manual
- June 1, 2024
- DURA SHOCK
Table of Contents
DURA SHOCK MUB1D Modular Universal Mini Rubber Bump Stops
Product Information
Specifications
- Product Name: MUB1D – Medium Universal Rubber Bump Stop
- Compatible with: Chevrolet 1999-2006 Silverado 1500, 2007 Silverado 1500 Classic, GMC 1999-2006 Sierra 1500, 20078 Sierra 1500 Classic
Product Usage Instructions
Factory Bump Stop Removal
- Grab the bump stop, turn, and pull down the bump stop out of the socket.
MUB1D Installation
- Jack up the truck for easier access to remove and install the bump stops.
- Always put a wheel stop on the front end before installation.
- Twist/Wedge and push the MUB1D into the empty socket.
MUB2 Installation
- For occasional light to medium load on the rear end, jack up the vehicle to install as many MUB2 to MUB1D for optimal connection between the vehicle frame and leaf spring/axle.
Combinations
- MUB1D directly replaces the original factory bump stop.
- MUB1D + MUB2 Results: Smooth and fast rebound after hitting a speed bump or curbside. For light loading/unloading.
Benefits of MUB1D + MUB2 Combination
- Increases vehicle stability under constant or occasional light loading conditions.
- Provides a smoother ride on rough road conditions.
- Enables fast rebound after passing through dips or potholes.
FAQ
- Q: How can I contact customer support for further assistance?
- A: You can reach out to us at info@dura-shock.com or call us at 562-287-4973 for any questions or support related to installing MUBS on your vehicle.
Please contact us at info@dura-shock.com immediately if you have any questions about installing MUBS on your vehicle. We are a US company located in Southern California.
(Do not Copy) MUBS is Patent Pending. This instruction is part of an
installation manual that is under Copyright Protection by DuraSHOCK®
WARNING: Customers require common automotive safety practices during the
installation. We recommend hiring a professional with mechanical knowledge.
DuraShock is not responsible nor be held liable for incorrect or faulty
installations.
For Vehicles
- Chevrolet 1999-2006 Silverado 1500, 2007 Silverado 1500 Classic, GMC 1999-2006 Sierra 1500, 20078 Sierra 1500 Classic
Installed Vehicle
- 2006 Chevrolet Silverado 1500
Tip: Jack up the truck for easier access to remove and install the bump
stops.
Note: Always put a wheel stop on the front end before installation.
Factory Bump Stop Removal
- Grab the bump stop, turn, and pull down the bump stop out of the socket.
Bump Stop Installation
- Twist/Wedge and push the MUB1D into the empty socket.
Combinations
-
MUB1D directly replaces the original factory bump stop.
-
MUB1D + MUB2
Results: Smooth and fast rebound after hitting a speed bump or curbside.
For light loading/unloading
-
MUB1D + MUB2 + MUB2
Results: Increase vehicle stability under constant or occasional light loading conditions.
MUB1D
- MUB1D – Direct Bump Stop replacement for Chevy 1999-2006 Silverado 1500, 2007 Silverado 1500 Classic, GMC 1999-2006 Sierra 1500, 20078 Sierra 1500 Classic
MUB2
- MUB2 – Optional add-on to MUB1D to add support and ground clearance for vehicle rear suspension. You can add as many MUB2 as you want to fit your needs.
- Please use the included rubber glue if you want to permanently attach the MUB2 module to MUB1D.
Tip: For occasional light to medium load on the rear end, you can jack up the vehicle to install as many MUB2 to MUB1D so the combination of the MUB series will lightly connect vehicle frame and the leaf spring/axle.
- After releasing the lift, the bump stop will be used as an in-between cushion.
- This will provide a smoother ride on rough road conditions and a fast rebound after passing through dips or potholes.
CONTACT
- www.dura-shock.com.
- E-mail: info@dura-shock.com.
- Tel: 562-287-4973
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>