SOUND BASS RM1104 Wall Mount Design For Sonos Ray Soundbar Instruction Manual
- June 14, 2024
- Sound BASS
Table of Contents
SOUND BASS RM1104 Wall Mount Design For Sonos Ray Soundbar
Tools Required
-
Pencil
-
Level
-
Phillips Screwdriver
-
Electric Drill
Wood Stud Installation
-
Stud Finder
-
1/8 in. (4mm) Drill Bit
Drywall Installation
-
Hammer
-
5/16 in. (8mm) Drill Bit
Installation Instructions
Customers Support
SOUNDBASS (UK) CO., LIMITED
RM 1104, CRAWFORD HOUSE
70 QUEENS ROAD
CENTRAL
HONG KONG
support@soundbass.co
www.soundbass.co/fb-support
Thank you for buying the Soundbass® Wall Mount for The Sonos® Ray™
Sound base (UK) Co., Limited and its affiliated corporations and subsidiaries (collectively known as “Sound bass”), Intend to make this manual accurate and complete. However, Sound bass makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Sound bass makes no representation of warranty, expressed or implied, regarding the information contained herein. Soundbass assumes no responsibility for accuracy, completeness or sufficiency if the information contained in this document.
©2021 Soundbase (UK) Co., Limited. All Rights Reserved. SOUNDBASS is a Sound
base (UK) Co., Limited brand and a registered trademark owned by Sound base
(UK) Co., Limited.
Soundbase (UK) Co., Limited, RM 1104 Crawford House, 70 Queens Road, Central,
Hong Kong Sonos Ctt & RAY™ are trademarks of Sons Inc. Sound bass is not
affiliated with Sones Inc. Made In China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>