John Lewis Selsey Pendant User Manual
- June 7, 2024
- John Lewis
Table of Contents
John Lewis Selsey Pendant User Manual
For use
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Recommended bulb
1 x 40W
ES GLS
or
1 x 28W
ES ECO HALOGEN CLASSIC
or
1 x 6W
ES LED ENERGY EFFICIENT CLASSIC CLEAR
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling. Dispose of used bulbs carefully. Do not exceed the wattage stated or use a different shape bulb from that indicated on the fitting.
Specification
Maximum wattage: 40W Voltage: 240V, 50Hz IP Rating: 20 Weight: 2.270kg
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis do not operate instore
take back, but as members of the Distributor Trade Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it
to your nearest collection facility or for further details contact your local
council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect
condition. However, should any parts be damaged or missing please contact our
Product Helpline on (01202) 690945.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Thank you for purchasing this Selsey light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please keep these instructions for future reference.
Warnings!
This is a Class 1 product and must be earthed.
Please read these instructions carefully before commencing any work and keep
them for future reference to ensure safe and satisfactory operation of this
product It is recommended that this fitting is installed by a qualified
electrician.
Install in accordance with the IEE Wiring regulations and the Building
Regulations.
To prevent electrocution switch off at mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electrical
supply without your knowledge. If you are in any doubt, please consult a
qualified electrician. This light fitting should be connected to a 5 amp fused
circuit. If replacing an existing fitting, make a note of the connections.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
When changing a bulb or adjusting the heads, always switch off at the mains
and allow to cool down. Dispose of used bulbs carefully. This product is
suitable for indoor use only. This product is suitable for installation on
surfaces with normal flammability e.g. wood, plasterboard, masonry. It is not
suitable for use on highly flammable surfaces (e.g. polystyrene, textiles).
For your safety, always switch off the supply before changing lightbulbs,
cleaning or removing shades. This product is made from glass and is heavy.
Therefore take extreme care when installing and cleaning this product, or
changing the bulb, to avoid damage or injury.
Parts List
Assembly
Refer to assembly diagrams opposite. Carefully unpack the carton, making sure all the parts are present before assembly.
Step 1
Before removing the existing fitting, carefully note the position of each set of wires.
Step 2
Remove the fixing bracket from the ceiling cover and attach to the ceiling using the screws provided. Ensure there is a joist at the point of fixing to support the weight of the product. Take care to avoid damaging any concealed wiring and pipes.
Step 3 – Height Adjustment
The drop of this product can be reduced. This is easier to do before attaching the product to the ceiling. The top chain link is a carabiner type link. Unscrew the collar (A) on the link and detach the link from the ceiling cover and chain. Work out the chain link that the carabiner will attach to and refit the carabiner link to this chain link and the hanging loop on the ceiling cover. Tighten the screw collar on the carabiner. Remove the excess chain links with a pair of pliers. Always ensure the weight of the fitting is supported by the chain and not the cable.
Step 4
Having identified the household wiring from your existing light fitting, connect to the connection block inside the product in the following way:
Step 5
When completed, ensure that there are no bare or loose strands of wire exposed.
Step 6
Attach the product to the fixing bracket, by locating the screws in the
bracket into the holes in the ceiling cover and tightening the screws to
secure. Take care not to trap any wiring.
Step 7
Replace fuse or circuit breaker and switch on. Your light is now ready for use
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>