eKids PSQSKHP02 Harry Potter Mini Speaker Instructions
- June 5, 2024
- eKids
Table of Contents
eKids PSQSKHP02 Harry Potter Mini Speaker
Specification
Bluetoooth ID | Palm Speaker |
---|---|
Power Rating | 3W |
Transmitting Frequency | 300HZ-20KHZ |
THD | <5% |
S/N | ≥80DB |
Speaker Parameter | 4Ω 3W diameter 36mm |
Battery | 3.7V/220mAh |
Bluetoooth Version | Bluetoooth 5.0+EDR |
Charging the battery:
- Insert the Micro USB port into the speaker and connect the other end into a USB port.The LED indicator will turn red.
- When the speaker is fully charged,the red
LED indicator will turn off.
Bluetooth pairing for music/phone call/camera remote shutter:
- Turn ON the speaker by pressing the power button(under the speaker)for 3 seconds. The speaker will make a sound and a blue indicator light will flash.
- Turn on your device and activate the Bluetooth function.
- Search for the Bluetooth pairing name “Palm Speaker”and click to pair. The speaker will make a sound and the blue indicator light will keep flashing.
- You can now play music and answer calls on your smartphone,you will hear the sound through the speaker. You can also use the power button to take photos.
- Turn OFF the speaker by pressing the power button for 4 seconds,the speaker will make a sound.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>