COSTWAY TY570426 4-Wheeled Children Sand Digger User Manual
- June 14, 2024
- COSTWAY
Table of Contents
COSTWAY TY570426 4-Wheeled Children Sand Digger
Product Information
- Product Name: 4-Wheeled Children Sand Digger TY570426
- Dimensions : 285x210mm
- Brand : COSTWAY
- Model: W..” cow-,”O
Product Usage Instructions
-
Step 1: Assemble the Seat Bracket to the Arm Assembly
Attach the seat bracket to the arm assembly using the provided screws or fasteners. Ensure that it is securely attached. -
Step 2: Assemble the Bucket
Attach the bucket to the designated area on the product. Use the provided screws or fasteners to secure it in place. Make sure it is properly aligned and tightened. -
Step 3: Assemble the Seat
Attach the seat to the seat bracket using the provided screws or fasteners. Ensure that it is securely attached and in a comfortable position for the user. -
Step 4: Insert Short Axle and Attach Wheels
Insert the short axle into the front base tube of the product. Attach one wheel on each side of the axle. Secure them in place by using a block shot or similar method. Repeat this process for the rear base tube, attaching two wheels in the same manner.
PRODUCT ASSEMBLY
-
Step 1:
Assemble the seat bracket to the arm assembly. -
Step 2:
Assemble the bucket. -
Step 3:
Insert the short axle into the front Base tube, attach 1 wheel on each side, and fix it by a blocked shot.
Using this way assemble another 2 wheels on the rear base tube. -
Step 4:
Insert the seat bracket tube into the base, fixed by a washer and a cotter pin.
285x210mm