TREATLIFE SK30 Outdoor Smart Plug User Manual

TREATLIFE SK30 Outdoor Smart Plug

Product Information

The Smart Outdoor Plug is a versatile device designed to make your outdoor living smarter and more convenient. It allows you to control outdoor electrical devices from your smartphone using the TreatLife app. The plug features an ON/OFF LED indicator, a silicone cover for protection, and is compatible with 2.4GHz networks. It supports Android 4.1 and above or iOS 13 and above.

Specifications

• Model: SK30
• Input Voltage: 120VAC/60Hz
• Wireless Frequency: 2.4GHz WiFi
• Wireless Standard: IEEE802.11b/g/n
• Support System: Android 4.1 and above or iOS 13 and above
• Max Output: 1800W (900W per outlet)
• Max Current: 15A Total

PRODUCT OUTLINE

INDICATOR LIGHT STATUS

White

| ON| The power to the plug is ON
OFF| The power to the plug is OFF, and the LED indicator is not lit

ADD DEVICES

1. Download the TreatLife APP To download the TreatLife APP, please either scan the provided QR code or search for ‘TreatLife’ in the Apple APP Store or Google Play Store.

2. Registration or Log-In
   Tap “Register” to create a new account. Key in your Email Address to receive a verification code, and create your personal password. Alternatively, if you’re an existing TreatLife user, simply choose “Log in”.

3. App Configuration for the Plug
   Pre-Check: Ensure the plug is powered, your smartphone Bluetooth is ON and the phone is connected to your WiFi router with active internet connectivity.
   NOTE: This plug is compatible only with 2.4GHz networks. If your phone is currently connected to a 5GHz network, please switch to the 2.4GHz network.

EZ Mode (Default Setup)

1. Press and hold the power button for about 5 seconds until the indicator light begins to blink rapidly.
2. Launch the “TreatLife” APP, which should detect the plug automatically, then click the Add button to complete the process according to the prompts in the APP.
   NOTE: The pairing process should be completed within 3 minutes post plug reset.

AP Mode (Manual Setup)
Press and hold the mechanical on / off button for 5 seconds until the red indicator light blinks.

1. Open the Treatlife app and tap the + button in the top right corner of the home screen. Select “Add Device.”
2. In the left navigation bar, locate “Plug” and tap on “Smart Outdoor Plug” on the right side. Then, click the “Next” button on the new page to continue.
3. In the top right corner of the new page, select “AP Mode” and follow the app’s prompts to complete the network setup process.

LINK TO ALEXA / GOOGLE ASSISTANT / SMARTTHINGS

1. Open the TreatLife APP and navigate to the product page.
2. Tap on the pencil icon located in the upper right corner.
3. Choose between Alexa, Google Assistant, or SmartThings for detailed linking instructions.

KEY STEPS TO LINK THE ALEXA SKILL

1. Sign in to your Amazon account, tap on “More” in the Alexa menu, then select “Skills & Games”.
2. Search for “TreatLife”, then tap “Enable to Use” to proceed.
3. You will be redirected to a new page where you need to enter your TreatLife account credentials (username and password) to complete the linking process.

SPECIFICATION

• Model: SK30
• Input Voltage: 120VAC/60Hz
• Wireless Frequency: 2.4GHz WiFi
• WirelessStandard: IEEE802.11b/g/n
• Support System: Android 4.1 and above or IOS 13 and above
• Max Output: 1800W (900/outlet)
• Max Current: 15A Total

FCC

FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions：

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures：

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

ISEDC WARNING
This device complies with Innovation, Science, and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions：

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 20cm.

Love The Way You Live

Support@treatlife.tech
Tech Support: www.treatlife.tech/pages/support

THANK YOU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>