TREATLIFE PS-W Smart Presence Sensor User Manual

TREATLIFE PS-W Smart Presence Sensor

What’s in The Box

Product Overview

Indicator Guide

• Power On or Reset: The blue and red lights flash once simultaneously.
• Waiting for Network Configuration: The blue light keeps flashing (expires after 3 minutes).
• Detection of Presence: The blue light flashes every 5 seconds.
• Error Indicator: The red light stays on continuously.

Setup

• Download the Treatlife app by scanning the provided QR code or searching ‘TreatLife’ in the Apple App Store or Google Play Store.
• Open the app,sign in or creat an account.
• Tap the ‘+’ button on the top-right corner of the Home tab. Tap Add Device > Sensors > Presence Sensor, and then follow the on-screen instructions.

Installation

• Installation Height: Ideally install the sensor 1m off the ground, aligning with the chest level of a seated person. If obstructed, install higher (up to 2m) and adjust the angle towards the typical sitting chest level.

• Horizontal Positioning: For alm side mount height, set sensitivity and
  detection distance to maximum for optimal performance.

• Mounting Process: If the installation spot is magnetic and no angle adjustment is needed, directly place the sensor. If not magnetic or angle adjustment is required, use the metal bracket with the provided sticker.

NOTE:

• Avoid installation near swinging plants, moving metals, fluttering curtains,clothes, air conditioners, or fans to prevent false detections.
• Avoid vibration-prone areas to prevent misjudgments.
• The sensor is not waterproof or moisture-proof. Ensure it’s installed in a dry area for longevity.

Voice Assistant Connection

• Select “Profile” on the Treatlife app and choose Third-Party Voice Services.
• Choose Alexa or Google Assistant as needed and follow the on-screen instructions.

Pro Tips

• Energy-Saving Mode
  Lights up when someone enters, turns off when empty.

• Morning Wake-up
  Gradually brightens lights in the morning as per schedule.

• Safety Alert
  Long bathroom stays trigger a light change and send notifications.

• Child Safety Mode
  Alerts when a child approaches a risky area.

Troubleshooting

What is the detection range and angle of the sensor?
The maximum detection range is 6 meters, and the maximum angle is 180 degrees.

What is the difference between a PS-W presence sensor and PIR sensor ?
In PS-W, the sensor has the ability to perceive small movements and static conditions, and is not affected by temperature. PIR sensors, on the other hand,detect motion by sensing infrared radiation but have relatively weaker capabilities in perceiving small movements and static conditions.

Do I need a hub?
This model connects via WiFi and does not require a gateway.

How to set up automation?
On the Treatlife app, select “Smart” and “When the Device Status Changes” as the trigger. Choose “Presence Sensor” for the state change. Then, select the devices you want to execute based on the detected action.

How to adjust the detection range of the sensor?
You can adjust the detection range of the sensor through the settings in the Treatlife app to ensure it meets your requirements.

Can this sensor integrate with other devices in a smart home system?
Yes, the sensor can integrate with other smart devices through the Treatlife app,enabling more intelligent home automation.

Will the performance of the sensor be affected under different temperature conditions?
The sensor is designed to operate normally under different temperature conditions and will not be affected by temperature.

Is there a visual interface to view the historical activity records of the sensor?
Yes, the Treatlife app provides a visual history of activities, allowing you to check the sensor’s operational history at any time.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>