GERMAN POOL SVB-245 Smart Vacuum Bottle User Manual

SMART
VACUUM BOTTLE
SVB-245 USER MANUAL

Please read these instructions and warranty information carefully before use and keep them handy for future reference.

Warnings and Safety Precautions

1. Before using this product for the first time, wash this product thoroughly with warm water diluted with dish detergent. then rinse thoroughly before use.
2. The lid of this product contains electronic components, DO NOT disassemble by yourself. After washing the tid. make sure the charging port is completely dry to avoid  short circuit or rusting.
3. To ensure optimal keep warm and keep cold effect, add an appropriate amount of hot water or ice water into the bottle to preneat or precool product before use. Add ice cubes for better result when keeping cold.
4. To ensure the function of this product and to prolong its service life, avoid collision or strong impact during use.
5. Be careful when hot liquid is placed inside this product to avoid scalding.
6. DO NOT keep warm dairy product or baby food for a long time to avoid the growth of harmful bacteria.
7. DO NOT place dry ice, carbonated drinks or other expandibie products inside this product.
8. Minors must use this product under the guidance of adults.
9. If accessories are lost or damaged during normal use, contact German Pooi Customer Service & Repair Centre.
10. This product has an IPX7 protection rating and is splashproof and washable.
11. DONOT piace this product in the dishwasher, dish warmer, utensil dryer or dish sterilizer to avoid damaging this product.
12. DONOT charge this product outside the temperature range of 3°C-43°C.
13. DO NOT use banana oil, gasoline. scourge pad, abrasive sponge or cleansing powder to clean this product.
14. When charging this product’s battery, keep the charge port dry and clean.
15. This product contains magnet. users with pacemakers must use this product with extra care.
16. This product contains a lithium ion battery, DO NOT charge product when there is hot liquid inside. DO NOT disassemble, strike, apply pressure or throw into fire.
17. DONOT use microwave oven or other heating equipment to heat this product. DO NOT place this product near an open flame.
18. DO NOT use this product in places where there are express regulations prohibiting the use of wireless devices, as it may interfere with other electronic devices and cause other hazards.
19. The lid of this product contains electronic parts and magnet. protonged exposure to high temperature can cause demagnetization. DO NOT soak this product in water for a long time. and DO NOT boii this product in hot water.

Product Structure

Note:
The lid contains a battery, DO NOT disassemble.

Operation Instructions

Charging This Product
To use this product’s temperature-display function, please  charge this product fully before use.

1. Place this product on a flat level surface, attach the USB end of the magnetic charging cable to the USB power adaptor, and attach the magnetic side onto the charge port on the lid.
2. During charging. the battery indicator on the display panel will Dlink and indicate the current battery level.
3. When product is fully charged, the battery indicator will light up constant.

Note:

• The magnetic charging cable can onty be used witha safety-certified power adaptor.
• When the magnetic charging cable is connected to power, DO NOT piace the attach the magnetic end of the cabie onto other conductive materials to prevent  short circuit.

Display Panel The yellow zone is the lid’s touch zone. When user touches this zone, Temperature Range Display Ring, Actual Water Temperature Display and Battery Indicator will all light up, and product ‘s Temperature Gauging
Function will be activated.
If Temperature Gauging Function has not been activated in 15 days, this product will automatically turn off, after which touching the display panel will yield no response. User must recharge this product in order to turn it on again.

Actual Water Temperature Display
Actual Water Temperature Display shows real-time temperature of the liquid inside the product. Temperature Range Display Ring
The different colors of the Temperature Range Display Ring correspond to different water temperature ranges inside the product.

| Green
Liquid inside the product is below 36°C
---|---
| Yellow
Liquid inside the product is between 37°C-49°C
| Red
Liquid inside the product is between 50°C-100°C

Technical Specification

• Specification is subject to change without prior notice.
• If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail.
• Refer to www.germanpool.com for the most updated version of the User Manual.

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

• This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

  1. Visit our VIP App and register online: (Scan the QR Code on the right)
  2. Visit our website and register online: www.germanpool.com/warranty
  3. Complete the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.

Serial No:……………………………………….
Invoice No:……………………………….
Purchased From:…………………………….
Purchase Date:…………………………………

1. Customer who fails to present original purchase invoice will be eligible for free warranty service.

2. Customer should always follow the operating instructions. This warranty does not apply to:
   – labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;
   – damages caused by accidents of any kind (including transport and others);
   – operating failures resulted from incorrect voltage, improper operations and unauthorized installations or repairs.

3. This warranty is invalid if:
   – the purchase invoice is modified by unauthorized party;
   – the product is used for any commercial or industrial applications;
   – the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
   – the serial number is modified, damaged or removed from the product.

4. German Pool will, in its discretion, repair or replace any defective part.

5. This warranty will be void if there is any transfer of ownership from the original purchaser.

Customer Service & Repair Centre

China Hong Kong
Unit B, G/F, Sunshine Kowloon Bay
Cargo Centre, 59 Tai Yip Street,
Kowloon, Hong Kong
Tel: +852 2773 2888
Fax: +852 2356 9798
Email: repairs@germanpool.com
China Macau
A, 1 Andar, Mei Kui Kuong Cheong Fase 2,
No.515 Avenida Do Conselheiro Borja
Macau
Tel: +853 2875 2699
Fax: +853 2875 2661
This warranty is valid only in Hong Kong and Macau

References

• 德國寶German Pool | 家庭電器、廚櫃、傢俬 | 香港十大名牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>