VEVOR TY-B17-1 Universal Forklift Seat User Manual
- June 15, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty Certificate
www.vevor.com/support
FORKLIFT SEATS
USER MANUAL
Model: TY-B17-1
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
TY-B17-1 Universal Forklift Seat
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
IMPORTANT SAFEGUARDS
Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- While assembling and using this product, keep work area clean and well-lighted, and keep spectators and children out of the work area.
- Assemble only according to the seat parameter. Improper assembly will cause hazards.
- Use as intended only.
- Keep anyone not wearing the appropriate safety equipment away from the work area.
- Flammable: Keep away from open flame. This product will ignite and burn if brought into contact with an open flame.
- Keep away from sharp points,blades and other items,so as not to scratch the product.
- Control the forklift seat, personal movement, and the work environment to avoid personal injury or damage to the tool.
- Do not operate any tool when tired or under the influence of drugs, alcohol or medications.
- Do not overreach when operating the tool. Proper balance enables better control in unexpected situations.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
| Model | TY-B17-1 |
|---|---|
| Product Size | 500505455mm |
| Color | Black |
| Safety switch voltage | 12/24/36/48V |
Instructions
Seat parameter
- Adjustable range of front and rear seats is 150mm.
- The Angle of the backrest can be adjusted from 80° to 110° and can be folded to the seat surface.
- The transverse installation size can be adjusted, ranging from 160mm to 340mm.
- Select the right screw holes for vertical installation according to your requirements.
- The connector type of seat safety switch: 40C
Correct Disposal :
This product is subject to the provision of European Directive 2012/19/EC. The
symbol showing a wheelie bin crossed through indicates that the product
requires separate refuse collection in the European Union. This applies to the
product and all accessories marked with this symbol. Products marked as such
may not be discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
Technical Support and E-Warranty Certificate
www.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an
estimate of savings you might benefit from buying certain tools with us
compared to the major
top brands and doses not necessarily mean to cover all categories of tools
offered by us. You
are kindly reminded to verify carefully when you are placing an order with us
if you are
actually saving half in comparison with the top major brands.