AMEWI 24128 MIG-17 50MM EDF Instruction Manual

June 15, 2024
AMEWi

AMEWI 24128 MIG-17 50MM EDF

AMEWI-24128-MIG-17-50MM-EDF-product

Product Information

The MIG-17 50MM EDF is a remote-controlled plane manufactured by AMEWI. It is designed for hobbyists and enthusiasts who have experience in operating remote-controlled aircraft. The plane features a 50mm EDF (Electric Ducted Fan) for propulsion and requires an 11.1V 1300-1500mAh Li-Po battery (not included) for power.

Safety and Hazard Warnings
It is important to follow the safety guidelines and precautions provided in the instruction manual to ensure safe operation of the MIG-17 50MM EDF. The plane is not a toy and contains small parts, making it unsuitable for children under 14 years of age. To prevent injury, fingers should be kept away from the drive parts and other moving components. The motor of the plane can become very hot, so it is advised to allow it to cool for 10-15 minutes after use before touching it.

Battery Notice and Disposal
The MIG-17 50MM EDF uses batteries that may require proper disposal. Batteries labeled with the recycling symbol should be placed in a used battery collecting tank, typically found in supermarkets. They should not be disposed of in local household garbage. The manufacturer, AMEWI Trade GmbH, is involved in a dual system for boxing to ensure proper waste disposal and reduction of CO2 emissions.

Important Notes
The MIG-17 50MM EDF complies with safety standards and requirements. It is not suitable for children under 14 years of age. The manufacturer does not take liability for any injuries or accidents caused by abnormal parts, excessive wear and tear, improper assembly, or operation. Users are advised to operate the product safely and responsibly.

Precautions
Before using the MIG-17 50MM EDF, it is important to read and understand the safety information provided. The model should not be used in rainy, snowy, or thunderstorm conditions as liquid entering the electronics can cause irreparable damage. The model should also not be used in environments with poor visibility as signal interference can lead to loss of control. Additionally, the model should not be used near crowds, in public places, or near rivers, ponds, or lakes.

Product Usage Instructions

  1. Before starting, thoroughly read and understand the instruction manual.
  2. Ensure that you have an 11.1V 1300-1500mAh Li-Po battery (not included) for powering the MIG-17 50MM EDF.
  3. Find a suitable outdoor area for flying the remote-controlled plane. Avoid crowded or public places.
  4. Ensure that the weather conditions are suitable for flying. Do not fly in rain, snow, or thunderstorms.
  5. Inspect the plane for any visible damage or loose parts before each flight.
  6. Install the fully charged Li-Po battery into the designated battery compartment of the plane.
  7. Turn on the remote control and then power on the plane by connecting the battery.
  8. Follow the remote control’s instructions to calibrate and set up the controls.
  9. Perform a range check to ensure proper signal reception and control functionality.
  10. When ready, gently throttle up to launch the plane into the air.
  11. Use the remote control’s various controls to maneuver the plane as desired.
  12. Monitor the battery level and land the plane safely before the battery power is depleted.
  13. After use, allow the motor to cool for 10-15 minutes before handling or storing the plane.

Following these usage instructions will help ensure a safe and enjoyable experience with the MIG-17 50MM EDF.

Welcome to AMEWI
The Amewi Trade GmbH is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany. Our product range includes over 10,000 items. Above all, this includes remote- controlled car, helicopter, boat, and tank models as well as a wide range of accessories and all necessary spare parts. Our sales network includes over 700 specialist dealer and online retailers across Europe.

The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer. Please always contact your dealer in warranty cases.

AMEWI Trade GmbH

  • Nikolaus-Otto-Str. 18 33178 Borchen Germany
  • Servicezeiten: Dienstag 9:30 – 12:00 Uhr | Donnerstag 14:00 – 16:30 Uhr
  • Telefon: +49 180 5009821 (Festnetz 14Ct/Min., Mobil max. 42Ct/Min.)
  • Support: https://amewi.com.

ECLARATION OF CONFORMITY

This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU {RED). The declarations and documents are stored at the manufacturer and can be requested and applied there. https://amewi.com/Konformitaetserklaerungen For additional questions to the product and conformity please contact:

Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.

ECURITY AND HAZARD WARNINGS

  • For damage, caused by disregarding of the manual, warranty expires.
  • We are not liable for secondary failures, material, or personal damage, caused by in proper usage or disregarding the security notices.
  • Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
  • Small parts. Danger of suffocation or risk of injury caused by small parts.
  • Suitable for people aged 14+!
  • The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop down from a small height can cause damage to the product.

ATTERY NOTICE & DISPOSAL

Attention!
Battery do not belong in the hands of children. A change of the battery must be done by an adult person. Never mix rechargeable batteries with non- rechargeable batteries. Never mix fully charged batteries with almost empty batteries. Never mix batteries of different capacities. Never try to charge dry batteries. Take care of the correct polarity. Defective batteries belong to special waste. Never leave a charging battery unattended. For questions about the charging time please read the manual or ask the manufacturer.

  • Read the safety instructions and warnings before using or charging the Li-Ion battery.
  • Stop using or charging it immediately if it leaks, has a temperature above 70° C or anything else unusual occurs.
  • Use only a qualified and specific Li-Po/Li-Ion charger. Never charge the battery unattended. Do not charge the battery if the charge exceeds 4.2 V / cell. Do not charge the battery with a charging current above 2C. Please check and ensure that you are using a qualified charger. An unqualified charger may cause a fire.
  • Do not discharge the battery with a current exceeding the maximum discharge current. Otherwise, this will cause the battery to overheat. This may result in bursting, fire or explosion.
  • Never disassemble, puncture, knock, drop, short circuit and/or throw the battery into a fire.
  • Improper use such as short-circuiting, or overcharging may result in explosion or fire.
  • Keep the battery in a safe place that babies or children cannot reach.
  • The above indicates the danger of using the battery. The user assumes full responsibility for the outcome of using the battery.

DISPOSAL
AMEWI is registered below the Bat-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronical products are not allowed to put in household garbage. Please dispose the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden! Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage. Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).

  • Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.
  • Batteries labelled with the recycling symbol can be put into used battery collecting tank. (Most supermarkets have)
  • They are not allowed to be put into local household garbage.
  • AMEWI Trade GmbH is involved in the dual system for boxing over the company Landbell AG.
  • All used boxes are collected from partner companies (waste disposal contractor) at private customers (local household), sorted and properly utilized. The involvement in a Dual Systems helps to save C02 Emissions.

THANK YOU
Thank you for purchasing the Amewi AMXFlight MIG-17. Please read the instruction manual carefully and keep it for future reference.

WARNING
This remote-controlled plane is not a toy. It consists of many small parts and is not suitable for children under 14 years. A 11,1V 1300-1500mAh Li-Po battery is used for the model (not included). Always keep your fingers away from the drive parts and other moving parts to avoid injury. The model’s motor gets very hot. To avoid burn injuries, allow the motor to cool for 10-15 minutes after use before touching it.

ON INAPPROPRIATE USE OF THE PRODUCT
Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.

IMPORTANT NOTES

Note:
This product is manufactured according to strict performance guidelines and complies with safety standards and requirements. This product is not suitable for children under 14 years of age. The manufacturer is not liable for any injury or accident caused using abnormal parts, excessive wear and tear, improper assembly, or operation. Please operate this product safely and responsibly.

PRECAUTIONS

  • Please read the following safety information before using the model.
  • Please do not use the model in rain, snow, or thunderstorms. If liquid enters the electronics, they may be irreparably damaged.
  • Please do not use the model in an environment that you cannot see.
  • Signal interference can cause the model to go out of control. Please do not use the model in the following places:
    • Near a radio tower, mobile phone masts or other places with active radio waves.
    • Near crowds or in public places.
    • Near rivers, ponds or lakes.
    • Near electricity pylons or other transmission towers.AMEWI-24128-MIG-17-50MM-EDF-fig- \(1\)
  • Please do not operate the model if you are tired or unwell, have drunk alcohol or taken drugs – this may cause injury to yourself or others.
  • To avoid burns, never touch drive parts and motors during or immediately after use as they can be very hot.
  • Incorrect operation of the transmitter can cause injury to you or others. Be sure to familiarize yourself with the operation before using the model.
  • Check the model and the remote control before use. Check screws to make sure they are tight.
  • When you have finished using the model, always switch off the model first and then the remote control. Otherwise, the model may get out of control.
  • If the model gets out of range, it may get out of control. Please always stay close to the model with the transmitter.

MPORTANT NOTES

  • Be sure to read thoroughly the manual before you begin.
  • As the product contains small parts, keep it away from small children.
  • Never reverse connection/disassemble the battery.
  • Do not operate the model on public roads or crowded places.

SPECIFICATIONS

Item

|  |

Included

---|---|---
Motor| 2627 4900KV| Yes
ESC| Hobbywing Skywalker 40A| Yes
Servo| 3x 9g digital| Yes
Receiver| 2,4GHz| No
Battery| 3S 1300-1500mAh| No
Transmitter| 6-Kanal 2,4GHz| No

PREPERATION OF MAIN WING PANEL

  • Apply glue to the recess for the servos and insert the servo into the hole.
  • Mount the rudder horns with the screws.AMEWI-24128-MIG-17-50MM-EDF-fig- \(6\)

INSTALLATION

INSTALLATION OF MAIN WING PANEL

  • Adjusting the clevis – Turn the clevis (A) clockwise or anticlockwise on the linkage.
  • Carefully spread the clevis and insert the clevis pin (B) into a selected hole in the control horn (C).
  • Connect the push rod to the servo arm and the control horns.
  • Glue the servo cover over the push rod.AMEWI-24128-MIG-17-50MM-EDF-fig- \(7\)

INSTALLATION OF TAIL UNIT

  • Apply glue to the tailplane and rudder and glue them to the fuselage.
  • Screw the control horns to the tailplane.
  • Connect the pushrod to the servo arm and the control horns.
  • After gluing the main wing and the tailplane, make sure that the main wing and the tailplane are in line.AMEWI-24128-MIG-17-50MM-EDF-fig- \(8\)AMEWI-24128-MIG-17-50MM-EDF-fig- \(9\)
ASSEMBLY THE FUSELAGE
  • Apply glue to the position of the elevator servo. Then glue the servo in place.
  • Connect the adapter to the servo arm and screw it to the servo.
  • Connect the ESC and the motor, make sure the motor works properly, then glue the ESC in place.
  • Route the ESC cable in the canopy.AMEWI-24128-MIG-17-50MM-EDF-fig- \(10\)AMEWI-24128-MIG-17-50MM-EDF-fig- \(11\)
ASSEMBLY THE RECEIVER

AMEWI-24128-MIG-17-50MM-EDF-fig- \(12\)

CENTER OF GRAVITY

AMEWI-24128-MIG-17-50MM-EDF-fig- \(13\)

FIRST FLIGHT

  • For the first flight, wait for a calm day with only a light breeze.
  • A good place is a large open field, away from trees, fences, power lines and other potentially dangerous obstacles.
  • Carry out a full check of the systems.
  • All control surfaces respond correctly.
  • Appropriate throttle response and battery voltage.
  • Perform a range test if not already done.
  • We recommend that you ask an experienced modeller to help you hand launch the model.
  • Launch the aircraft with the fuselage and wings into the wind.
  • Initially let the MIG-17 fly straight and level; do not attempt to turn it when it is close to the ground.
  • Adjust the trims as necessary to transition the model into a steady climb.
  • Check the model’s response to the transmitter’s control commands. You may need to increase or decrease control surface travel when the model is back on the ground.
  • Bring the aircraft to a safe altitude and check the stall speed.
  • Keep the speed much higher on the approach to avoid a stall.
  • If you had to adjust the trim in flight, correct the mechanical linkages before flying again. This will allow you to re-centre the trims so that full trim travel is available for subsequent flights.

amewi.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals