2E-OPS-600 Portable Power Station User Manual

: June 13, 2024
: 2E

Table of Contents

2E-OPS-600 Portable Power Station
Product Information
Product Usage Instructions
Packing List
Product introduction
Technical Specification
UPS mode
Solar panel connection
Car charging
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2E-OPS-600 Portable Power Station

2E-OPS-600-Portable-Power-Station-
product

Product Information

The Portable Power Station is a versatile device that provides power on the go. It is designed for use in various environments and comes with a range of safety features to ensure reliable and safe operation.

The model number of this product is 2E-OPS-600.

Key Features:

DC5.5*2.1 Input Only
Cooling Fan
Car Cigarette Lighter (Female) with DC5.5*2.1 connector
AC Output Voltage: AC230V/50Hz
PD 150.20W Input/Output
LED Torch
Type-C1 Input/Output
VDE (Europe) Socket Output: AC230V/50Hz

Product Usage Instructions

Before using the Portable Power Station, please read and follow the instructions below:

Avoid using the product near high temperature, high humidity, direct sunlight, and fireplaces.
Do not disassemble or modify the product to prevent malfunction and fire.
Dispose of or recycle the product according to local laws.
Avoid dropping the product from a high place or subjecting it to a strong impact.
Keep the product out of reach of children.
Use only genuine accessories provided by the company. Non-genuine accessories may cause damage that cannot be repaired free of charge.
Leave a space of about 30cm away from the side suction and exhaust ports to ensure proper heat dissipation.
When not using the product, turn off the power and unplug the power cord. Avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
For long-term storage, consume power from full to no power once every 3 months, then recharge to about 50%.
Do not use the product and its accessory cables and connecting equipment if there is a defect.
Avoid storing the product for a long time in extremely high and low temperature places, such as in a car or field warehouse, to avoid shortening the battery life.

To operate the Portable Power Station:

Type-C1 Input/Output: Connect your device without any additional actions. The Power Station will be dischargedautomatically.
LED Torch: Press the Light Button (12) for 3-5 seconds to turn on the lighting. Click the light button to switch between different modes (Weak/Strong/Blink).
AC Output: Press the AC On/Off Power Button (11) for 3-5 seconds. The Power Station will start outputting AC power. Press the AC Power Button again for 3-5 seconds to cut off the AC Output.

WARNING

Please avoid using the product near high temperature, high humidity, direct sun environment and fire place.
Do not disassemble or modify this product, it will cause malfunction and fire.
Please discard or recycle the product according to the methods prescribed by local laws.
Be careful not to drop the product from a high place and give the product a strong impact.
Keep or use the product in a place out of the reach of children.
Please use our company’s genuine accessories. The damage caused by the use of non-genuine accessories cannot be repaired free of charge.
Please leave a space of about 30cm away from the side suction and exhaust ports, so as not to affect the heat dissipation of the product.
When not using this product, please turn off the power and unplug the power cord. Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
For long-term storage, please consume power from full power to no power once every 3 months, and then recharge to about 50%.
Please do not use this product and its accessory cables and connecting equipment when there is a defect. Please do not store the product for a long time in extremely high and low temperature places such as in the car and in the field warehouse to avoid shortening the battery life.

Packing List

After opening the package, please check whether the product appearance is damaged or lack of accessories.

№	ITEM	QUANTITY
1	Portable Power Station	1
2	98W AC Adapter (with AC Cable)	1
3	Type-C Cable (30 cm Type-C to Type-C)	1
4	Car Cigarette (Female with DC5.5*2.1 connector)	1
5	User Manual	1

2E-OPS-600-Portable-Power-Station-fig-1

Product introduction

DC5.5*2.1 Input Only
Cooling Fan
12V Cigar lighter (Female)
LED Screen (AC/DC/POWER/Voltage)
1. DC On/Off Power Button
2. Main On/Off Power Button
PD100W Input/Output
PD27W Output Only
Dual USB Output
3DC5.52.1 Output
2*VDE(Europe) Socket Output(AC230V/50Hz)
AC On/Off Power Button
LED Torch On/Off Power Button
LED Torch
Type-C1 Input/Output, no need to do any actions, connect your device, the Power Station will be discharged automatically.
Press the Light Button (12) for 3-5 seconds, the lighting will be turned on, click the light button to switch different modes (Weak/ Strong/Blink).
The following steps must be turned on the Power Station: Press Power Button (5.2) for 3-5 seconds.
- When the Screen is lighted on, Press the Power button (5.2) again to switch on the Type-C2+2*USB-A(QC3.0-18W) output.
- Press the DC button (5.1) (till LED for DC is lighted on), then 3DC5.5(at the bottom of the screen) and 112V Car outlet (at the top of the screen) can be output.
- Press the AC Power Button (11) for 3-5seconds,the Screen show moment Voltage 230V means AC Socket can be output. Press AC Power Button again for 3-5seconds to cut off the AC Output(the LED for AC was turned off).

Notice:

It is recommended that the loaded device should not exceed 600W, and the excessive power may cause output protection or burn out the product.
The Cooling Fan will be started when the total output Power >=150W(1pc), Power >=300W(2pcs)
USB-A QC3.0-18W have no output when DC Charging Input
DC input will be cut off @85% battery level when DC+PD Input same time
DC5.52.1/Car Outlet have no output when DC5.52.1 Input
DC Output will be cut off when AC Output reached 500W

Technical Specification

OUTPUT

AC OUTPUT

DC12V OUTPUT

INPUT

| DC5.52.1: 5-24.5 V/2-5 A, 122.5 W (Max.)
DC5.52.1: Solar Attached, 100W (Max.)
Type-C1: PD100W (Max.)
Support Type-C+DC Input 200 W (Max.)
BATTERY
57 6Wh/160000 mAh@3.6 V or 576 Wh/40000 mAh@14.4 V
SIZE/N.W
258212249 mm/6.1 KG

UPS mode

UPS function
This product has the bypass mode, does not need to pass through the battery, can directly output from the AC. In UPS mode, when the AC input power of the mains is cut off due to a power outage, the AC input power of the mains can be used in about automatic switch to product battery power within 10 ms to ensure AC output.
UPS Connections
As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state. When you turn on the power of the electrical appliances, it will directly uses the AC power of the power grid. In this state, when the power grid is cut off, it will automatically switch to the product’s internal battery to supply power. 2E-OPS-600-Portable-Power-Station-
fig-3

Solar panel connection

Our products can be connected to solar panels and can be charged through solar panels.
Solar panel input can be the most maximum 100W.

Solar panel charging power, according to the weather and climate conditions.

Connecting Pattern

Car charging

This product can be charged by the cigarette lighter in the car with an DC cable or PD Cable.
Connect Car Charger to the cigarette lighter in the car and the DC5.5 port OR Type-C port on the side of the product, turn on the engine of the car, and the LED of this product will show the input power.

On-board charging should be carried out with the car engine turned on. If the engine is not turned on, the battery might run out.

Warranty

Warranty Card

This product provides a 12-month warranty service from the date of purchase

If there is a quality problem within the range of normal use, we provide warranty service.
After purchasing our company’s products, please keep this product together withinvoices and other items. When maintenance services are needed, please provideinformation according to our company’s request.
In the case where the warranty is damaged or altered, and no stamp of the sales store on the warranty, the warranty service may be not be provided.
Damage causes by use beyond the normal range of use is not covered by the warranty service.
The content of the warranty scope shall be subject to the content recognized by the company.
Even within the scope of the warranty, sometimes it will be exchanged for products with the same function. The shipping and repair fees for products outside thewarranty range shall be paid by the customer.
Sometimes the specifications and functions of the product will be updated without prior notice.