Simply Retrofits DL4-023 Track Light Instruction Manual

Table of Contents

Simply-Retrofits-DL4-023-Track-Light-PRODUCT

The product is a retrofit solution provided by Simply Retrofits.
Simply Retrofits is a company that specializes in providing retrofit solutions for various applications. They can be contacted via phone at 905-581-9097 or by email at Contact@simplyretrofits.com.
Their customer service hours are from Monday to Thursday, 7:00 a.m. to 5:30 p.m., Friday from 7:00 a.m. to 5:00 p.m., and Saturday from 9:00 a.m. to 1:00 p.m. Their official website is www.simplyretrofits.com.

To use the product, follow these steps:

Contact Simply Retrofits via phone or email to inquire about the specific retrofit solution you require.
Provide them with your contact information and address for further communication.
Visit their website at www.simplyretrofits.com to explore their range of retrofit solutions and services.
If you find a suitable solution, contact Simply Retrofits again to discuss the details and place an order.
Follow any additional instructions provided by Simply Retrofits for the installation or usage of the specific retrofit solution you purchased.

If you have any further questions or need assistance, feel free to contact Simply Retrofits during their customer service hours mentioned above.

TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE: The product may not look exactly as shown in the figures.

STEP 1

Attach the Easy Connect™ mounting bracket to the electrical box with electrical box screws.

STEP 2 – Option 1

Connect (push) electrical wires from the electric box (house wiring) into the correct inserts. Black (Live), White (Neutral), Green (Ground)

Option 2 – MULTIPLE ELECTRICAL BOX WIRES

For multiple green (ground), black (live), and white (neutral) wires joined in the electrical box (house wiring), attach a single green black” and “white” jumper wire before connecting. Strip 7mm from the 6″ jumper wires supplied.
Then connect (push) wires into the correct inserts.

CONNECT LIGHT FIXTURE

STEP 3

STEP 4

STYLE# 1- Tuck electrical wires into the outlet box and position the fixture over the studs or nipple on the mounting bracket assembly. Secure fixture in place with star washer(s) and cap nut(s).
Note: If required, assemble the body and spread the arms of the fixture out evenly.
STYLE #2 – Attached fixture to the mounting bracket by tightening the 2 screws.

STEP 5 – Optional for some models (Note: Refer to the style of assembly that matches the style of your fixture.)

Style#1 – Remove spinner nut from the socket. Place the glass onto the fixture socket. Use the special tool that comes with your fixture to tighten the spinner nut onto the socket to secure the glass in place.
Style#2 – Install proper bulb type and wattage. Remove the finishing screws that are already on your fixture. Position the glass in place and secure it with finishing screws.
www.simplyretrofits.com

QUESTIONS OR CONCERNS CONTACT AT: