LUXE Bracelet Smart Watch User Manual

LUXE Bracelet Smart Watch

Instructions for Use

1. Smartwatch can detect heart rate and blood oxygen but cannot be used for any m, medical function;

2. Charging : Please charge:e your smartwatch before use and make sure it is fully charged. Please make,e sure the 2: 1 magnetic charging cable pop pins are aligned with the 2 charging contacts of the
   main unit, or plug the charging cable into the US! B adapter (adapter 5V 1 A). Please make sure that the metal! contacts are free of dust, oxidation, and impurities. When charging, the charging icon appears on the screen of the smartwatch. If you haven’t used your sm1artwatch for a long time, please charge it once a month.

3. Do not use a power adapt, er with an output curr, ent of more than 2A to charge; otherwise, the smartwatch will be damaged.

4. Do not shower with hot water or place the smartwatch at a high temperature; otherwise, the water resistance of the smartwatch will be damaged.

5. Do not charge in wet or watery conditions.

Appearance

1.  Product introduction
2. Remove Strap and Charg1e Mode
3. List of Package Contents
   • A. Packing box*1I
   • B. Smartwatch*1
   • C. User’s manuall*1
   • D. Magnetic USIB cable *1

Application installation and
Bluetooth connection
Please search ”’ Q Watch” in Myapp and Google Play on Android devices or APP Store on iPhone, or scan the QIR code below to download and install the application.

Note: Android supports 5.0 and higher; 110S supports 10.0 and higher;. Bluetooth hardware 5.0 and higher find the smartwatch. Click on the self-bind device and ·tlhen the device you want to connect to. If there are multiple devices in the vicinity, select the MAC address of the smartwatch you want to bind. If the smartwatch is successfully tied to the phone, the Bluetooth icon will be displayed at the top of the smartwatch.

Product Parameters

• Main control! chip: NRF52832
• Bluetooth: BLE 5.0
• Screen size: 1 .45 inches, TFT color sere-en Battery capacity: 1 50 mAh
• Battery type: Polymer – battery
• Use time: 5-7 days
• Waterproof level: IP68
• Charging method: m.agnetic USB cable Operating temperature: 0-40°C

Instructions for U1se

Press the side key or raise your hand to wake up the screen, and press it for 3 seconds on the home,e page to switch the interface. Slide up into the function list. Slide down into the control oent1er.

Function Description

1. Dial replacement
   Long press the home page for 3 seconds to enter the dial replacement. 1Or download the dial replacement on the APP.

2. Control center
   Slide down into the control center. For respectively: wrist lifting and bright screen, flashlight,, DND mode, brilliance control, shutdown, and system settings.

3. Wrist lifting and bright screen
   Slide down into the control center,, and click the wrist lifting and bright screen icon to set whether to turn the wrist lifting and brig1ht screen on or off.

4. Flashlight
   Slide down into the control center Click the flashlight icon and turn on the flashlight,ght.

5. DND mode
   Slide down into the control center,, and click the DND mode icon to set whether to turn the DND mode on or off.

6. Brilliance control
   Slide down into the control center. and click the brilliance control to adjust the brightness of the equipment.

7. Shut down
   Slide down into the control center,, and click the shutdown icon to pop up the selection of whether to shut down or not.

8. System settings
   Slide down to enter the control center, and click Settings to enter the system settings.

9. Information
   Slide right into the information bar to view the information.

10. Motion data
    Slide left to view the exercise data, and record the number of steps, kilometers, and calories respectively.

11. Heart rate
    Slide left twice to enter the heart rate interface,, and start measuring and displaying heart rate data.

12. Music Control
    Slide left three times to enter music control.

13. Step counting
    Slide up into the list function, and click step counting to view the number of steps, kilometers, and calories.

14. Sleep
    Slide up into the list function and click Sleep to view sleep da1ta. 1 5. Motion pattern
    Slide up into the! list function, click ent, er the 1 motion pattern, and select your favorite motion pattern.

15. Motion record
    Slide up into the list function and click motion record.

16. Heart rate
    Slide up into the list function and click to enter the heart rate measurement.

17. Blood pressure
    Slide up to enter the list function and click to enter blood pressure measurement.

18. Blood oxygen
    Slide up into the list function and click to enter the blood oxygen measurement.

19. Physiological cycle
    Slide up into the list function and click enter to view the physiological cycle.

20. Information
    Slide up into the list function and click enter to view information.

21. Stopwatch
    Slide up to enter the list function and click to enter the stopwatch function.

22. Photographing
    Slide up to enter the list function, click to enter the remote control photo, and open the APP synchronously for operation.1

23. Calculator
    Slide up to the list function and click to enter the calculator.

24. Respiratory function
    Slide up into the list function and click to enter respirat1 or training.1

25. Alarm clock
    Sliup to enter the list function and click to enter the alarm clock setting.

26. Timer
    Slide up to enter the list function and click to enter timer settings.

Cautions

1. Why should I wear my smartwatch tightly when testing my heart rate?
   By using the principle of light reflection, the smartwatch penetrates the skin with a light source and collects the signal reflected on the sensor to calculate the heart rate. If not worn tightly, ambient light will enter the sensor and affect the measurement accuracy.

2. Not recommended to wear in a hot bath: the first factor: a hot bath will produce steam due to the high temperature of the bath water, it is easy to produce a lot of steam. Steam is a gas with a small molecule radius, so it can easily penetrate the gap in the intelligent smartwatch casing. When the temperature drops, the water will gradually condense into water droplets, which will cause damage to the circuit board and further damage the smartwatch.

3. When connecting Bluetooth. Make sure the Bluetooth of your phone is turned on and the smartwatch is powered on. When doing a Bluetooth search, please make sure the smartwatch is not connected to another account number; when doing a Bluetooth search, please keep the smartwatch and the phone as close as possible.

4. If the user’s phone has installed other software, such as Mobile Manager, to ensure the normal operation of the background APP, please turn on the phone’s message push and allow background operation, otherwise, it can not push messages.

5. To ensure the accuracy of the test data, after entering the blood oxygen test mode, stay relaxed and still during the test and make sure the smartwatch and your heart are at the same height. Please do not talk during the test. (This function provides data reference for blood oxygen changes before and after human exercise and cannot be used for medical purposes).

Battery Information

Battery material/Lithium polymer battery

• Battery model: 481820
• Battery power parameter: 0.555wh
• Nominal Voltage: 3.7V
• Rated Capacity: 150mAh

Warning
This product is not a medical device. This smartwatch and its applications are not available for diagnosis, treatment or preventive therapy of diseases. Consult a medical professional before changing your exercise habits and sleep habits to avoid serious injury. The manufacturer reserves the right to modify and improve the functional descriptions of the user guide, as well as to update the content on an ongoing basis without notice. This user guide is for reference only, for smartwatches sold here, please refer to the final product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>