LUXE 1008E Elongated Comfort Fit Toilet Seat Owner’s Manual
- June 4, 2024
- LUXE
Table of Contents
LUXE 1008E Elongated Comfort Fit Toilet Seat
BEFORE INSTALLATION
Please note there are 2 installation options for your LUXE 1008R toilet seat.
Installation Option #1 (pages 3-5) is the Standard Installation method of the
toilet seat to your toilet. If you plan to install this toilet seat with a
Luxe Bidet, please follow Installation Option #2 (pages 6-9) the Luxe Bidet
Installation method. If you do not have a Luxe Bidet, please follow the
Standard Installation method.
Need assistance with installation, or have questions about the product?
We are here to help! Please don’t hesitate to contact us at anytime.
PARTS LIST
Standard Installation
STEP ONE
Uninstall your existing toilet seat completely. You may need to follow the
instructions provided by the toilet seat manufacturer. Most toilet seats can
be uninstalled by gripping the nut on the underside of the toilet bowl and
unscrewing the bolts from the top using a flathead screwdriver. Remove any
bolts and screws from the toilet bowl completely before installing your Luxe
1008R toilet seat.
STEP TWO
There are 2 accessory bags included with your toilet seat. For this
Standard Installation method, you will only need to use the parts in the bag
labeled
“Standard Installation Parts”. The parts in this bag (except for the
Decorative Cover) will come preassembled together (as shown in Figure B). The
parts come preassembled to help you visualize how all the parts will fit
together in the end. You will need to unscrew the connecting bolts to
disassemble the parts.
STEP THREE
Insert the plastic grommets into the toilet bowl holes, plugging the holes.
The purpose of the grommets is to create a tight and secure fit. Place the
bearings on top of the grommets so the hole of the bearings align with the
toilet bowl hole and grommets, then insert the connecting bolts through the
bearings (Figure C). Insert the nuts through the threads of the connecting
bolts, followed by the plastic expansion bolts. To secure, hold the connecting
bolts in place and twist the expansion bolts on the threads of the connecting
bolts until almost fully tightened.
STEP FOUR
Rotate and adjust the bearings on the toilet bowl before fully tightening the
bolts so that the ends of the bearings align with the holes on the bottom of
the toilet seat as shown in Figure D. Once the bearings have been properly
adjusted, tighten the connecting bolts fully using a screwdriver.
STEP FIVE
Place the decorative covers on top of each bearing as shown in Figure E, then
carefully lower the toilet seat onto the ends of the bearings until secured in
place. Please Note – The bottom of the seat will not sit completely flush on
the body of the bearings (this is normal).
STEP SIX
Once you have lowered the toilet seat onto the ends of the bearings, your
installation is complete! Congratulations! We hope you enjoy your new Luxe
1008R Toilet Seat. If you need help, or have any questions about the product,
feel free to contact us using the contact details below:
Phone: 858-360-7780
Email: customercare@luxebidet.com
Luxe Bidet Installation
STEP ONE
Uninstall your existing toilet seat completely. You may need to follow the
instructions provided by the toilet seat manufacturer. Most toilet seats can
be uninstalled by gripping the nut on the underside of your toilet bowl and
unscrewing the bolts from the top using a flathead screwdriver. Remove any
bolts and screws from the toilet bowl completely before installing your Luxe
1008R toilet seat.
STEP TWO
For this Bidet Installation method, you will need both accessory bags –
“Standard Installation Parts” AND “Parts for Installing with your Luxe Bidet”.
You will NOT need the “Decorative Cover” (below). The parts in the “Standard
Installation Parts” bag will come preassembled together (Figure B). The parts
come preassembled to help you visualize how all the parts will fit together in
the end. You will need to unscrew the connecting bolts to disassemble the
parts. 
STEP THREE
Place the bidet attachment on the toilet bowl (Figure C). Then, insert the
plastic grommets into the toilet bowl holes, plugging the holes. Set aside the
circular adjustment plates and gaskets that come with the bidet. These are not
needed for installation with this toilet seat. The “Parts for Installing with
your Luxe Bidet” bag includes separate attachment plate parts which will be
used in place of the circular attachment plates that come with the bidet.
STEP FOUR
Place the plate blocks onto the bidet attachment plate holes making sure
that the pads and gaskets are properly fitted underneath the plate blocks, as
shown below. Rotate the plate blocks so that the plate block holes align with
the toilet holes (Figure D).
STEP FIVE
Place the bearings on top of the plate blocks making sure that the pads are
properly fitted underneath the bearings, as shown below, then insert the
connecting bolts through the bearings, as shown in Figure E.
STEP SIX
Once the bearings and connecting bolts are aligned and in place on top of
the plate blocks, insert the nuts through the threads of the connecting bolts
followed by plastic expansion bolts. To secure, hold the connecting bolts in
place and twist the expansive bolts on the threads of the connecting bolts
until almost fully tightened. Adjust the positioning of the bearings to align
with the holes on the bottom of the toilet seat. Once aligned, fully tighten
bolts with a screwdriver. (Figure F).
STEP SEVEN
Place the plate covers on top of the bearings and press down firmly until
you hear a click sound. If the plate covers are not staying in place, you may
need to tighten the connecting bolts more so that the bearings are completely
flush against the plate blocks. The connecting bolts should ideally be placed
exactly in the center of the bearings for a secure hold.
STEP EIGHT
Carefully lower the toilet seat onto the ends of the bearings until secured
in place. Congratulations! Your toilet seat installation is complete. To
complete the installation of your Luxe Bidet to the water supply valve(s),
please follow the installation instructions in your Luxe Bidet Owner’s Manual.
If you need help, or have any questions about the product, feel free to
contact us using the contact details below:
Phone: 858-360-7780
Email: customercare@luxebidet.com
Website: www.LuxeBidet.com
Email: customercare@luxebidet.com
Phone: 858-360-7780
Fax: 858-876-1559
Luxe Bidet HQ
7770 Regents Rd. 113-632
San Diego, CA 92122
United States
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>