REDARC ABS Mount Fixed Monocrystalline Solar Panels Instruction Manual
- June 4, 2024
- REDARC
Table of Contents
REDARC ABS Mount Fixed Monocrystalline Solar Panels
The ABS plastic side mount is designed to attach single or multiple solar panels to a RV or boat. This installation guide instructs how to use REDARC SMI9001, SMI9002, SMI9003 or SMI9007 ABS mounts to attach single or multiple solar panels to the roof of a boat or RV without drilling, to maintain seal integrity.
BEFORE YOU BEGIN
Read the Fixed Solar Panel and Sikaflex product use instructions.
Check that you have everything you need
Additional items are required to complete this installation and are not
included with the product. The installer must supply all parts, tools and
fasteners required for the individual installation configuration.
YOU WILL NEED
- Adhesive: Sikaflex 252
- Painted/fiberglass surface primer: Sika Primer 206 G+P
- ABS Plastics surface primer: Sika Primer 215
- Packers or double-sided tape to 4mm thickness.
FITTING THE ABS MOUNTS
- A prime roof surface with Sika Primer 206 G+P. The surface can be painted or fiberglass.
- Prime the mounting brackets mating surface with Sika Primer 215.
- Set packers/double-sided tape in place on the roof surface. These need to be 4mm thick as the thickness of the bonded adhesive must be 4mm in thickness.
- Apply a 6mm bead of Sikaflex 252 to the ABS mount, then put in place and press down.
- Hold in place until the Sikaflex bonds (unless double-sided tape has been used).
- Let the Sikaflex cure for the required amount of time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>