baseus PB4436Z-P0A0 Power Bank User Manual
- June 15, 2024
- Baseus
Table of Contents
PB4436Z-P0A0 Power Bank
User Manual
Baseus Amblight Digital Display Quick Charge Power Bank 26800mAh 65W
Please read this user manual carefully before use and keep it for future
reference.
Specifications
Name: Power Bank
Model No.: PPLG2-65
Battery: Polymer lithium battery
Capacity: 26800mAh / 99.2Wh
Energy conversion rate: ≥ 75%
iP input: 5V 2.1A
Micro input: 5V 2A; 9V 2A; 12V 1.5A
Type-C input: 5V 3A; 9V 3A; 12V 3A; 15V 3A; 20V 3A
Type-C output: 5V 3A; 9V 3A; 12V 3A; 15V 3A; 20V 3.25A
USB1/USB2 /USB3 output: 5V 3A
USB4 output: 5V-4.5A(SCP); 4.5V 5A(SCP); 5V 3A; WV 3A; 12V
2.5A; 20V 1.5A
USB1+USB2+USB3+USB4 output: 5V 3A
USB1/USB2/USB3+Type-C output: 15W+45W
USB4+Type-C output: 18W+45W
5V Total output: 5V 6A
Product size: 14565 x 38mm
Product weight: About 534g
Content
Power bank X1
Charging cable X1
User manual <1
Warranty card X1
Description
This is a compact 65W fast charger with 3 input ports, 5 output ports, and a digital display; it supports multiple fast charging protocols, 5-device simultaneous charging, and USB-C port bidirectional fast charging. The digital display shows the battery level, voltage, and current. This charger provides fast charging for smartphones, tablets, laptops, gaming devices, and more. The circuit is equipped with overcurrent, overvoltage, over-temperature, and shortcircuit protection.
Overview
Power Button Instructions
- In no-load state, press the button to display the current battery level.
- Under loading state, press the button to display the current battery level, press it again to display the current voltage, and again to display the current. When multiple loads are connected, press the button to display the current voltage and total load current.
Operating Environment
Operating temperature: Non-tropical area, 0°C to 35 °C
Storage temperature: 0°C to 40 °C
Icon Description
The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.
Safety warning instructions Tips
-
This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur. 2. Please charge this product with a charger approved by the local safety standards in case of danger or damage.
-
DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
-
If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
-
Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches.
And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation. -
This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F (60°C).
-
DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
-
This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.
Statement on Toxic and Hazardous Substances in Electronic Information
Products:
| Part Description | Toxic or hazardous substances and elements |
|---|---|
| Lead (Pb) | Mercury ( Hg) |
| (CrVI))** | Polybrominated biphenyls (PBB) |
ethers (PBDE)**
PCB| X| ◯| ◯| ◯| ◯| ◯
Battery| X| ◯| ◯| ◯| ◯| ◯
Casing| ◯| ◯| ◯| ◯| ◯| ◯
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T 26572 standard.
The product complies with EU ROHS 2.0 directive (2011 / 65 / EU)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
It is hereby declared that BS-PPLG2-65, a product model of Shenzhen Baseus
Technology Co., Ltd., complies with the provisions of Directive 2014/30/EU
,Directive 2014/35/EU, Directive 2011/65/EU . The full text of the EC
Declaration of Conformity can be found on the following website:
www.baseus.com
**This equipment complies with the provisions of Directive 2012/19/EU and
Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment
with ordinary trash. It must be recycled. This symbol indicates that the
product shall not be treated as regular domestic trash, and must be delivered
to a recycling center that is capable of recycling electronic and electrical
equipment.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2™ Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB/T 35590
Hotline: +1 800 220 8056 Website: https://www.baseus.com
Official After-sales E-mail Address:
care@baseus.com
Warning**
Please follow the above safety instructions otherwise it will cause fire,
electric shock, damage or other damage
PB4436Z-POAO
1100005753
Designed by Baseus
Made in China
Documents / Resources
|
baseus PB4436Z-P0A0 Power
Bank
[pdf] User Manual
PB4436Z-P0A0 Power Bank, PB4436Z-P0A0, Power Bank, Bank
---|---