LITETRONICS SFSAS01 Strip Elbow with 3 Wires for Pluggable Sensor Installation Guide
- June 15, 2024
- Litetronics
Table of Contents
LITETRONICS SFSAS01 Strip Elbow with 3 Wires for Pluggable Sensor
Product Information
- Product Name: Strip Elbow with 3 Wires for Pluggable Sensor (SFSAS01)
- Manufacturer : Litetronics
- Address : 6969 W. 73rd Street Bedford Park, IL 60638
- Website : www.litetronics.com
- Email : customerservice@litetronics.com
- Contact Number: 1-800-860-3392
- Date of Printing: 1/16/23
- Version : V1
Product Usage Instructions
WIRING INSTRUCTIONS:
- Before installation, always turn off the power supply from the main circuit breaker first!
- Open the fixture and remove knockout.
- Remove lock nut.
- Attach the elbow to the knockout and replace the lock nut. Tighten it securely.
- Follow the wiring diagram for connections (refer to Figure 1).
- Close the fixture.
- Turn on the power.
WHAT COMES IN THE BOX:
- Elbow
- Installation Instructions
DIMENSIONS/SIZE:
No specific dimensions or size information provided in the extract.
SAFETY INSTRUCTIONS AND WARNINGS:
No specific safety instructions or warnings provided in the extract. Please
refer to the complete user manual for detailed safety information. If you have
any further questions or need specific product details, please contact
Litetronics at 1-800-860-3392 or via
email at
customerservice@litetronics.com.
To check for an updated version of these instructions, please visit www.litetronics.com.
Installation Instructions
WHAT COMES IN THE BOX
- Elbow
- Installation Instructions
SAFETY INSTRUCTIONS AND WARNINGS
- When using electrical equipment, basic safety precautions should always be observed
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
- Installation should only be conducted by a qualified electrician in accordance with NEC and any relevant local building codes.
- Be certain electrical power is OFF before and during installation and maintenance.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or sharp objects.
WIRING INSTRUCTIONS
- Before installation, always turn off the power supply form main circuit breaker first!
- Open the fixture, remove knockout.
- Remove lock nut, attach elbow to knockout, replace lock nut and tighten.
- Follow wiring diagram for connections (Figure 1).
- Close the fixture.
- Turn on the power.
DIMENSIONS/SIZE
Thank you for choosing
6969 W. 73rd Street Bedford Park, IL 60638 WWW.LITETRONICS.COM
CustomerService@Litetronics.com or
1-800-860-3392
The information and product specifications contained in these instructions are based upon data believed to be accurate at the time of printing. This information is subject to change without notice and without incurring liability. If you have questions regarding specific product details, please contact us at 800-860-3392 or via email at customerservice@litetronics.com. To check for an updated version of these instructions, please visit www.litetronics.com.
1/16/23-V1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>