OUKITEL WP32 Smartphone User Manual
- June 15, 2024
- OUKITEL
Table of Contents
WP32 Smartphone
User Manual
WP32 Smartphone
Manufacturers Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.LTD
Smart Phone.
Model number: WP32
Operating Temperature: -10° C to 40° C
“This device was tested for typical body-worn operations. To comply.
with RF exposure requirements, a minimum separation distance of Omm must be
maintained between the usar’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and simiar accessories used by this device
should ot contain any metalic components. Body-wom accessories that do ot meet
these requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna “This device in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. All essential radio test sutes have been carried out.
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The product shall only be connected to a USB interface of version UsB 20
- Adapter shall be installed near the equipment and shall be easily accessible.
- The plug considered as disconnect device of adapter
- The device complies with RF specifications when the device used at omm form your body
Accessories
Battery
WP32 includes an internal battery.You can rack your batery status wilh the con showed on the op rightof the scroen.
Warning
- Use only OUKITEL-approved bateries speciicaly designed fo you phore.
- Incompaibe batieries can cause serious njres or damage 0 your phone.
- Nover pac bateres or phones on or in heating devioes such as microwave ‘ovens stoves o radators Battries may explode when overheated.
How toinsert the card
Tomake sure your pad s able to make cals, insertthe SIM card n he fllowing
order.
+Insert and press the ejector pi into the hole i the side to pop the card
tray.
With the pad facing up, insert the cardholder ito the pad in the direcion of
the armow.
How to boot
Non-removable battery
Press the power button for 3-5 seconds (o boot
How to send SMS, MMS
SMS
- Open the SMS app.
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS-video
- When witing a text message
- Select images, videos, or other fles you want to add, even you can take a new picture or video right away
- Selecting or sending
Language switching settings
- Main menu-settings system-language and input method Language and input method-anguage-language adding
- Select the language you need, the system will automatically Jump back to the language interface
- Select the icon ater the language bar and drag itto th fist one
SAR
- The maximum electromagnetic radiation absorpton ratio (SAR) of this product s 2.0Wikg
- In ine with the requirements of the national standard
EN62200-1:2016; EN 62200-2:2010; EN 62479:2010;
EN 50360:2017: EN 50566:2017;
Safety
- In order to ensure safety during use of the product , you must st abide by the following rules
- The pad should be at least 15cm away from any medical implant o rhythm adjuster and never put the device in your coat pocket
- Do ot expose the device and other batteies together with high temperatures or heat-generaling equipment such as. sunlight, healers, microwave ovens, ovens, or waler heaters. ‘Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outet
- If the device is equipped with a non-removable battery, do not replace the battery by yourself o avoid damaging the battery or the device.
- Use of an unapproved or incompatible power source, charger, or baery may cause fire, explosion, or other hazards.
- Do ot disassemble or reset the battery, insert other objects, immerse in water or other liguids 1o avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scraich, or punctur the batery to avoid Subjecting the battery to excessive extemal pressure, Which may resultin nternal shortcircuit and overheating of the batiery.
- The company does not bear responsibilty for accidents ‘caused by non-standard related charging equipment.
1f you want to read the fll CE compliance, please check this fink: hitp:/www. oukitel.com
Maintenance
- Thoroughly understand the maintenance of this pad 1o usethe pad more safely and effectively, and extend the service Iie of the pad as much as possible.
- Please folow the instructions in the manual to open the pad, disassemble the accessories, and do not iy other
- Please avoid dropping, knocking, or shaking your pad. Rough handiing of the pad can cause the screen to rupture, ‘Gamaging the internal cicuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft colton cloth dampened with water and mild soap.
- Clean the lens with a clean, dry, softcloth. (Example: ‘camera lens) and display.
- When the charger is not in use, please unplug it fom the. power outlet. Do not connect the battery that has been fully charged to the charger for @ long time, as overcharging will shorten the battery e
- This machine’s standard package (Package box-Pad-Manu- al-Protective fim-Protective case-Headsel-USB data cable-OTG cable-Charger)
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference Any changes
or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters
and similar accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided. Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
FCC ID : 2ANMU-WP32SPUT
|
---|---
http://oukitel.com|
https://oukitel.com/pages/wp32-user-manual
Website:
oukitel.com
Manufacturer Name : Shenzhen Yunji Intelligent Technology CO , LTD
Manufacturer Address: 202, Building A2, Silicon Valley Power Intelligent
Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community,
Guanlan Street, Longhua District, Shenzhen China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>