VEVOR CY-SF02 Snow Roof Rake User Manual
- June 15, 2024
- VEVOR
Table of Contents
TOUCH TOOLS, HALF PRICE
ROOF RAKE
USER MANUAL
MODEL: CY-SF02
CY-SF02 Snow Roof Rake
Technical Support and E-Warranty Certificate
www.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL: CY-SF02
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can result
in serious injury.
Assembly precautions
- Assemble only should be according to these instructions. Improper assembly can result in hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol,
- drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the roof rake.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions
- DO NOT SIT OR STAND ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- The shape is for reference only. The actual shape shall prevail.
SAVE THESE INSTRUCTIONS
PARTS LIST
- .Roof rake head
- Metal braces (2)
- Pole adapter
- Handle grip
- Pole handle
- Pole extensions
- Long bolt
- Short bolts (2)
- Nut (1)
- Hex wrench
- Open wrench
- Ring handle
ASSEMBLY STEP
STEP1
Depress the small buttons on the pole adapter and insert the pole adapter into
the connector on the back of the roof rake head.Push firmly until the two
small buttons pop up in the holes on the connector.
STEP2
Align the holes of the metal braces with the hole on the end of the pole
adapter. Secure them with the long bolt and one nut.
STEP3
Connect the metal braces to the rake head with 2 small bolts as
shown.
STEP4
To connect the roof rake head assembly with the pole handle, depress the small
button at the end of the pole handle and insert it into the end of the pole
adapter. Make sure the small button pops up in the hole on the pole adapter so
the assembly is secured.
STEP5
If additional reach is needed, connect the provided pole extensions between
the pole handle and the rake head assembly. Make sure the small buttons pop up
in the hole on the pole,so the assembly is secured.Finally,assemble the Ring
handle to a suitable position.
PRODUCT PARAMETER
| Package size（mm） | 130018285 |
|---|---|
| Size（mm） | 6445635150 |
| N.W（kg） | 3.06 |
| G.W（kg） | 3.7 |
| Colour | Black and |
| Type | 25 inch plastic scraper |
| Scraper material | ABS |
| Scraper width | 25 ” |
| Handle material | TPR |
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten,
Germany
UKREP: Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730 Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>