prolink DL-7302 LTE CAT4 Wi-Fi Home Router Installation Guide

DL-7302 LTE CAT4 Wi-Fi Home Router
Installation Guide

 Package Contents

Note:
Prior setup, please prepare all the required items including the SIM Card to be used for the Internet

Overview

Interface and Buttons

1. WPS button
2.  Wi-Fi On/Off button
3.  Power LED
4.  Internet LED
5.  Wi-Fi LED
6.  WPS LED
7.  Mobile Signal LED
8. SMA connectors for external LTE antennas
9.  SIM card slot
10.  Reset button (Press and hold for more than 5 seconds to reset to the factory default)
11.  On/Off button
12.  DC power input
13. LAN ports
14. WAN port
15. USB port

Installation

Step 1: Hardware Installation 1.1 Connect and tighten 2 external antennas into the SMA connectors ofL TE router properly
1.2 Open the SIM card slot cover, insert the SIM Card into the slot per the direction accordingly
1.3 Connect the power adapter jack over to the DL-7302 DC Input and switch ON
1.4 Connect client to the 4GL TE Wireless Router through wired or wireless

•  For wired connection: Connect the PC / Laptop over to the DL-7302 LAN Port
• For wireless connection: Connect the Wi-Fi client over to the DL-7302 default SSID (Prolink_DL7302_xxxx) with default password (printed n the sticker)

Step 2: Web Configuration
2.1 Ensure the client (PC, Laptop, or Mobile device) is connected to the DL-7302
2.2 Launch an internet browser and enter http://192.168.1.1 or https://192.168.1.1 onto the address bar Note:
Due to loco I https with self-signed SSL certificate, the security warning message will be prompted when accessing https://192.168.1.1. Please click on “Advanced” then continue with “Proceed to 192.168.1.1 (unsafe)”
2.3 Key in the login account and password (default Username is admin, password printed on the sticker) 2.4 For the first time login, please follow the Setup Wizard to complete all accordingly 2.5 If the SIM Card APN cannot be found automatically, you need to enable APN manually and enter the APN provided by your Internet Service Provider as below settings – LTE > Basic Settings 2.6 The Internet and LTE Signal information will be displayed on the Status as below

Tips:

1. In the event that the Internet connection is not available even ofter inserting SIM Cord, configure the device as follows:
   Step 1: Contact your Service Provider/ Operator for APN setting information required for manual APN setting through the Web Configuration
   Step 2: Launch on Internet Browser and go to http://192.168.1.1 or https://192.168.1.1
   Step 3: Upon log-in, refer to step 2.5

2.  I is not recommended to insert SIM Cord while DL-7302 is powered on

3.  The use of Micro/Nano-SIM card with unofficial adopter is not recommended

Worldwide Customer Care Centers
INDONESIA Office
PT PROLiNK INTIDATA NUSANTARA

](mailto:support.id@prolink2u.com)

MALAYSIA Office
FIDA SYSTEMS (M) SON BHD

Walk-In| 29 Jalan US] 1/31, 47600 Su bang Jayo, Selangor Darul Ehsan, Malaysia.
---|---
Telephone| +603 8024 9151
Sale Enquiries| sales.my@prolink2u.com 
Technical Support| support.my@prolink2u.com

SINGAPORE Office
FIDA INTERNATIONAL (SJ PTE LTD

Walk-In| Block 16 Kallang Place #06-02, Kallang Basin Industrial Estate, Singapore 339156.
---|---
Telephone| +65 6357 0668
Sale Enquiries| sales@prolink2u.com 
Technical Support| support@prolink2u.com 

Technical Support Hotline

Note: Closed on Saturdays, Sundays and local/regional Public Holidays.
Register on line for your Product Warranty atwww.prolink2u.com
Prolink is a registered trademark of Fida International (S) Pte ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Product images are purely for illustrative purposes and may defer from the actual product. Specifications are subjected to changes without prior notice. Copyright© 2021 Fida International (S) Pte ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>